SkyBell DDA User manual

SkyBell Digital Doorbell Adapter (DDA)
Installaion Guide (SKU: DA02101H)
The SkyBell Digital Doorbell Adapter (“DDA”) is required for a SkyBell HD Wi-Fi
Video Doorbell device when connected to an indoor digital doorbell chime system.
The SkyBell DDA enables users to remotely control the indoor digital doorbell chime
through use of the SkyBell HD mobile app, (Android or Apple iOS). Users may use
the mobile app to turn-of, or turn-on the chime whenever it is convenient – like a
‘Do Not Disturb’ type funcion. When the indoor chime is turned-of, users will con-
inue to receive call noiicaions sent to their mobile device, but the chime will not
ring inside the home.
SkyBell Digital Doorbell Adapter Requirements
The SkyBell DDA installs inside of an indoor digital doorbell chime by connecing the
wires to the terminals used for FRONT (represening the front door bell) and TRANS
or TRANSFORMER, used for regulaing low-voltage power of wired indoor digital
chime systems. The diagram below shows how the SkyBell DDA connects to the ter-
minals inside of a digital doorbell chime, which is connected to both the SkyBell HD
Wi-Fi Video Doorbell and the transformer. PR120DDA-04

SkyBell Digital Doorbell Adapter (DDA)
Installaion Guide (SKU: DA02101H)
Instrucions
• Insert one wire each
into the connector on the
SkyBell DDA as shown
in the diagram
• Ensure the wire is
inserted all the way and
is not loose
• Connect one wire lead
to the “FRONT” terminal
of the digital doorbell
chime
• Connect the second
wire lead to the “TRANS”
or TRANSFORMER”
terminal
• Make sure all wires are
securely fastened