ZB2044December 2007
Page 5
Section 2 - Operation (Continued)
2.9 Function Tests..................................................................................................................................................35
2.9-1 Operator’s Cab Controls .................................................................................................................35
2.10 Start Operation ................................................................................................................................................44
2.10-1 Starting the Engine ..........................................................................................................................44
2.10-2 Driving the Telehandler ....................................................................................................................45
2.10-3 Driving on Slopes ...........................................................................................................................45
2.10-4 Steering the Telehandler ..................................................................................................................46
2.10-5 Leveling the Telehandler ..................................................................................................................46
2.10-6 Raising or Lowering Boom ..............................................................................................................46
2.10-7 Extending or Retracting Boom ........................................................................................................47
2.10-8 Handling Loads ...............................................................................................................................47
2.10-9 Parking and Shutting-down the Telehandler ...................................................................................48
2.11 Refueling Procedure (Diesel Fuel Only) ..........................................................................................................48
2.12 Use of the Capacity Charts .............................................................................................................................50
2.12-1 Examples on Reading the Capacity Chart ......................................................................................51
2.13 Attachments Installation ..................................................................................................................................52
2.13-1 Removing Attachments Using the Quick Attach Feature ................................................................52
2.13-2 Installing Attachments Using the Quick Attach Feature ..................................................................52
2.14 Handling Loads ...............................................................................................................................................53
2.14-1 Handling Loads at Ground Level ....................................................................................................53
2.14-2 Handling Loads at Variable Heights ................................................................................................54
2.14-3 Adjusting Forks ................................................................................................................................55
2.14-4 Changing Forks ...............................................................................................................................55
2.14-5 Slinging Loads .................................................................................................................................55
2.15 Optional Attachments ......................................................................................................................................56
2.15-1 Fork Positioner Attachment .............................................................................................................56
2.15-2 Combination Fork Positioner/Sideshift Attachment ........................................................................56
2.15-3 Bridge Stripper Attachment .............................................................................................................57
2.15-4 Pipe and Pole Grappler ...................................................................................................................57
2.15-5 Pipe and Pole Handler .....................................................................................................................58
2.15-6 Hydraulic Winch ...............................................................................................................................58
2.15-7 Jib Boom Attachment (5-ft) .............................................................................................................59
2.15-8 Light-material Bucket .......................................................................................................................59
2.15-9 Coil Boom ........................................................................................................................................60
2.15-10 Third-party Attachments and Platform for Elevating Personnel ......................................................62
2.16 Loading and Transporting ...............................................................................................................................63
2.16-1 Loading and Tie-down .....................................................................................................................63
2.16-2 Towing the Telehandler ....................................................................................................................64
2.17 Coolant Level Maintenance .............................................................................................................................65
2.17-1 Radiator Fill Maintenance ...................................................................................................................65
2.18 Tables .................................................................................................................................................................66
2.19 Labels .................................................................................................................................................................72
List of Tables
Table 2.1 Standard and Optional Equipment ..........................................................................................................66
Table 2.2 Specications and Features .....................................................................................................................67
Table 2.3 Tire/Wheel Specications .........................................................................................................................68
Table 2.4 Recommended Fluids/Lubrication ...........................................................................................................69
Table 2.5 Maintenance and Inspection Schedule ...................................................................................................70
Table 2.6 Operator’s Checklist .................................................................................................................................71
To order go to Discount-Equipment.com
