SkyLine LadderBarrier 5020 Series User manual

INSTALLATION &
USER MANUAL
LADDERBARRIER
5020 SERIES
Support: [phone] www.skylinegroupintl.com

WARNING
Serious injury or death may result if this product is misused or not installed
properly. Skyline Group provides these instructions and relies on the
purchaser and the end user to train personnel at all times, and to make
sure the user of this product fully understand the importance of following
these instructions. Skyline Group expressly disclaims any liability from
injury, damage, or other loss resulting from the improper or unauthorized
installation or use of Ladder Barrier.
Note: This information is valid as of the revision date:
2020-05-27
INSTALLATION & USER MANUAL
LADDERBARRIER
5020 SERIES
1
Support: [phone] www.skylinegroupintl.com

CONTENTS
COMPONENT/TOOL REFERENCE GUIDE.................... 3
Common Tools ............................................................................................................................. 3
Common Components.............................................................................................................. 4
INSTALLATION INSTRUCTIONS....................................... 5
5020 Series LadderBarrier....................................................................................................... 5
OPERATION & MAINTENANCE....................................... 12
2
Support: [phone] www.skylinegroupintl.com

COMPONENT/TOOL
REFERENCE GUIDE
Quick & Easy to Install
The LadderBarrier system comes with many components
pre-assembled and is super quick and easy to install while
meeting rigorous requirements.
Common Tools:
CORDLESS DRIVER
SUITABLE SOCKET
ADAPTER
5/16” HEX BIT
SOCKET
17MM WRENCH
3
Support: [phone] www.skylinegroupintl.com
7/16” DRILL BIT

COMPONENT/TOOL
REFERENCE GUIDE
Common Components:
POSTS
& RAILS
1
3
LADDER
SUPPORT
BRACKET
4
PAVER FRAME
2
Support: [phone] www.skylinegroupintl.com

INSTALLATION INSTRUCTIONS
5020 Series LadderBarrier
1 2
Lay out the base frame sections. Align with front and rear frame
sections and bolt with M10x30mm
bolts.
5
Support: [phone] www.skylinegroupintl.com
3Bolt side mount posts to base frame using M10x30mm bolts.

INSTALLATION INSTRUCTIONS
5020 Series LadderBarrier
6
Support: [phone] www.skylinegroupintl.com
4
5
Align front support angle flush with top of parapet and drill holes in posts to match holes
in angle.
Bolt angle to posts using M10x100mm bolts

INSTALLATION INSTRUCTIONS
5020 Series LadderBarrier
7
Support: [phone] www.skylinegroupintl.com
6
8
7
9
Bolt ladder support bracket to angle
using M10x30mm bolts
Attach mid rails to posts using x2
48mm tek screws per post.
Attached top rails to posts using x4
20mm tek screws per post
Insert end caps and secure with a
20mm tek screw per end cap.

INSTALLATION INSTRUCTIONS
5020 Series LadderBarrier
8
Support: [phone] www.skylinegroupintl.com
10 Insert concrete pavers into frame. *Maximum paver size is 23 5/8” x 23 5/8”
11 Installation Complete.

1. Only use system in accordance with applicable codes
and regulations.
2. An annual inspection of the system is required to ensure
that all fasteners are correctly tightened and the system is
performing correctly. Skyline Group can provide this for a
fee, upon request.
3. Installation instructions to be read in conjunction with the
provided drawings.
Please note that this information is valid as of the revision date noted.
OPERATION & MAINTENANCE
12
Support: [phone] www.skylinegroupintl.com

19896 Hwy 7, Perth, ON K7H 3C9
www.skylinegroupintl.com
[phone]
WE MAKE HEIGHT SAFETY COMPLIANCE
EASY