Skyroam Gmate User manual

Quick
Quick
Quick
Quick Start
Start
Start
Start of
of
of
of Gmate
Gmate
Gmate
Gmate
Battery
Battery
Battery
Battery Installation
Installation
Installation
Installation
A) Insert your fingernail in the gap at the back cover of Gmate device and use proper
force to jack up the battery cover.
B ) Then, insert the battery in the contact of the battery according to the following
diagram and at last cover the back cover of the battery

Charge
Charge
Charge
Charge
Please use the 5V 500mA charger or computer data cable to charge it.
When the battery is leaving the factory, there is already certain amount of electric
quantity. If the client displays insufficient electric quantity during the using
process, please charge it according to the following operations.
<Warning>
<Warning>
<Warning>
<Warning> :Only the charger and data line approved by our company can be used. The
use of unauthorized charger and data line will cause the explosion of the battery
or damage of your Skyroam device. It is strictly forbidden to plug the charger to
charge when the Skyroam is not installed with the battery.
>
>
>
> Use
Use
Use
Use Power
Power
Power
Power Adapter
Adapter
Adapter
Adapter to
to
to
to Charge
Charge
Charge
Charge
N ote:Our company do not provide power adapter,Please prepare yourself,5V 500mA
power adapter can be used.
A) Insert one end of the data line (USB port) to USB socket of the power adapter.
B) Plug the power adapter in the power socket.
C) Insert another end of the data line (miniport) to the USB socket of Skyroam device.
>
>
>
> Use
Use
Use
Use USB
USB
USB
USB Computer
Computer
Computer
Computer Data
Data
Data
Data Line
Line
Line
Line to
to
to
to Charge
Charge
Charge
Charge
Make sure the computer is already started up before charging the battery.
A) Insert one end of the data line (miniport) to USB socket of the Skyroam device.

B) Connect another end of the computer data line to the USB port of the computer.
During the charging process, the LED light of Skyroam device will alternatively
display red and green. Meanwhile, the electric quantity icon of the client will
jump. After the battery is fully charged, LED light will display green for a long
time, and the electric quantity icon of the client will stop jumping.
Installation
Installation
Installation
Installation of
of
of
of SIM
SIM
SIM
SIM Card
Card
Card
Card
Insert SIM card to the Gmate device according to the direction drawn in the following
diagram to make sure the contact of SIM card is correctly connected to the contact
of Gmate device.
Status
Status
Status
Status of
of
of
of Indication
Indication
Indication
Indication L
L
L
L i
i
i
i ght
ght
ght
ght of
of
of
of Skyroam
Skyroam
Skyroam
Skyroam Device
Device
Device
Device
A) Light
Light
Light
Light off:
off:
off:
off: shutdown status
B) Twinkling
Twinkling
Twinkling
Twinkling yellow
yellow
yellow
yellow light:
light:
light:
light: startup status, but not connected
C) Twinkling
Twinkling
Twinkling
Twinkling green
green
green
green light:
light:
light:
light: startup status, and connected
D) Charge:
Charge:
Charge:
Charge: during the charging, the red light and green light twinkle in turn. The
more the time the green light stays, the more the electric quantity charged. After
the completion of charging, the green light will be on for a long time.
E ） Flashing red light ： low battery status

Startup
Startup
Startup
Startup
Press on the power button for 3 seconds, and release it after the status light turns
green. Then, the device enters the startup program.
Shutdown
Shutdown
Shutdown
Shutdown
Press on the power button for 3 seconds, and release it after the status light turns
red. Then, the device enters the shutdown program.
Restoration
Restoration
Restoration
Restoration of
of
of
of Ex-factory
Ex-factory
Ex-factory
Ex-factory Setting
Setting
Setting
Setting
Under the startup status ， use clip or other similar tool to aim at the reset hole
and press on it for 3 seconds, and then the