SMAI RACER FIT User manual

RACER FIT ASSEMBLY

1. Free the sensor Wire from the right side of the
treadmill frame ensure that it is free from the body
of the treadmill. Take all precautions to ensure you
do not cut or damage the sensor wire in any way.
4. Align the right post assembly with the bolts on the
running platform, Ensure the sensor wire is hidden
within the cavity and not caught between the right
post assembly and running platform. Ax the bolts
provided and tension.
2. Free the sensor wire from the right Post assembly
taking all precautions to ensure the wire is not
damaged in any way.
3. Connect the sensor wire from the running platform
to the sensor wire in the right post assembly
ensuring they connect with one another correctly.
5. Ax the left post assembly and ax to the
frame (there are no sensor wires required for the
assembly of the left post hence you can just ax
the post to the frame without any additional steps
required.

8. Add the batteries provided to the monitor and
replace the cover.
6. Remove the sensor wire from the top of the Right
post assembly.
Connect the sensor wire from the right post
assembly to the wire within the upper handle tube
ensuring the wire is not damaged in the process
and connection is done correctly.
Note: all bolts are in the holes they need to be fixed
into so they will need to be removed prior to fixing
the upper handle tube.
7. Ax the port covers onto the side of the frame
using the screws provided, Please ax with a
screwdriver as the impact from over tensioning
this component with a cordless drill may crack the
cosmetic cover.

10. Push the excess sensor wire back into the frame
(so that it is free and cannot be damaged in any
way)
Ax the monitor to the frame.
9. Remove the sensor wire from the upper handle tube
and connect it with the sensor wire on the back of
the monitor.