HOMCOM A90-231 User manual

ASSEMBLY INSTRUCTION
INaoc004V02_UK
A90-231
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

IMPORTANT SAFETY NOTICE
The bike has been designed for home use only. Please note the following safety precautions:
1. Read all instructions before assembly & operation. Assemble the bike exactly as per the
instructions contained in this manual.
2. Check all screws, nuts & other connections before using the bike.
3. Use the bike only for its intended use as described in this manual.
4. Use a suitable base, such as a rubber mat, under the bike and keep the area around the bike
clear of dirt and obstacles.
5. Keep children & pets away from the bike at all times.
6. Only one person at a time should use the bike. (max weight:110 KG)
7. Always use the bike on a dry, clear & level surface. Do not use it outdoors or near water or
excessive moisture.
8. Always remove water or moisture from the bike before & after use.
9. Keep all hands & feet away from any moving parts.
10. Do not insert any objects into any of the openings on the bike.
11. Before using the bike clean it thoroughly, do a comprehensive & proper warm up.
12. Always wear appropriate workout clothing & shoes when exercising & do not wear robes or
other clothing that could become caught in the bike.
13. Close supervision is necessary when used by children, invalids or disabled persons.
14. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while
using the bike, STOP the workout at once & CONSULT A PHYSICIAN IMMEDIATELY.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN.
THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS WITH PRE-EXISTING HEALTH
PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING THE BIKE. WE ASSUME NO
RESPONSIBILITY FOR HEALTH-RELATED INJURIES OR PROPERTY DAMAGE SUSTAINED
BY OR THROUGH INCORRECT OR EXCESSIVE USE OF THIS BIKE.
MAX WEIGHT OF USER: 110 KG
-2-

-3-

-4-

-5-

-6-

-7-

-8-

-9-

-10-

-11-

EXPLODED DRAWING
-12-

Parts L ist
No. Description Qty No. Description Qty
1 Main frame 1 50 Eccentric shaft Φ12*105 1
2 Front post 1 51 Eccentric wheel Φ20*38 1
3 Front Stabilizer 1 52 Bushing Φ23×Φ12.2×11 2
4 Cushion Frame 1 53 Lock washer Φ30×2.0 2
5 Handle bar 1 54 Idler spacer Φ16*Φ10.2*10 1
6 Adjusting tube 1 55 Pulley φ240/J6 1
7 Magnet board 1 56 Foam grip φ23*φ33*450 2
8 Idler link 1 57 Rope Set 2
9 Rear stabilizer 1 58 Rear end cap φ50 4
10 Bolt M6*70 2 59 Plug 1
11 Nut M6 1 60L/R Pedal (1/2") 2
12 Bolt M8*40 7 61 Round end capφ25*1.5 2
13 Nylon Nut M8 S13 2 62 Belt 370PJ6 1
14 Nut M10x1xH5 2 63 Seat cushion 360*280*40 1
15 Nut M10x1xH4 1 64 Backrest cushion 380*290*40 1
16 Nylon Nut M10 5 65 Sleeve 2
17 Screw ST4.2*20 5 66 Cap 60*30*1.5 2
18 Screw ST4.2*20 4 67 Cap 50*25*1.5 1
19 Bolt M8*60 1 68 Plug 12 1
20 Magnetic fix board 4 69 Shell 1
21 Bolt M8*15 4 70 Crank plug 2
22 Bolt M8*45 20 71 Arc idler Φ43.5×25 1
23 Washer φ16*φ8.5*1.5 4 72 Tension control wire 280mm 1
24 Washer D8 2 73 Tension control wire 55MAX/760mm 1
25 Bolt M8*42 6 74 Idler wheel Φ41×Φ8.5×20 2
26 Washer φ16*φ8.5*1.5 6 75 Brake block 40*38*32 1
27 Nut M8 4 76 EV washer 40*20*3 1
28 Bolt M8*16 2 77 Computer wire 100mm 1
29 Bolt M8*40 4 78 Middle wire 600mm 1
30 Bolt M5*8 2 79 Needle sensor wire 500mm 1
31 Screw M8x38 2 80 Domed Cap for M8 Nylon Nut 3
32 Screw M5*15 2 81 Domed Nut for M6 Nylon Nut 4
33 Bolt M6*15 1 82 Nylon Nut M6 4
34 Lock Washers for Shafts D12 1 83 Brake handsets Ø24*77*Ø12 1
35 Bolt M5*20 1 84 Ten sets shelf Ø46*8 2
36 Flat Washer D5 2 85 Nut Ø46*12 1
37 Bolt M5*10 2 86 Washer Ø46*2 1
38 Ten sets Ø56*15.5 1 87 Nut 32*32*4 2
39 Crank 140*220,1/2 1 88 Lock nut 2 Ø46*12 1
40 Flywheels spacer Φ16*Φ
10.2*17 1 89 Washer Ø40.5*3 1
41 Tension spring Φ18×48 Φ2 8 90 Slidable Wheel 2
42 Black magnet 40x25x10 1 91 Bolt M6*45 2
43 Round magnet Φ15×6 1 92 Screw ST3*10 9
-13-

PARTS LIST
44 Inertia wheel Φ
10*125*M10*1*17 1 93 Flat Washer D6 4
45 External magnetic flywheels
φ200*72.5/3Kg 2 94 Bad pad Bracket 1
46 Bearing 6000Z 1 95 Cap 40*25*2.0 1
47 Tension spring Φ18×48 Φ2 1 96 Sleeve 2
48 Bolt φ9.8*6*M8*15 1 97 Screw M8*68 1
49 Brake handle Φ12*380
-14-