Smanos K1 User manual

K1/K2
SMARTHOME DIY KIT
USER MANUAL
EN DE ESFR PTNL IT

Contents
1. Things to Note before Getting Started …………………………………………………………………4
2. How the K1/K2 System Works …………………………………………………………………………………5
3. Included in Your K1/K2 Smart Home System ………………………………………………………6
4. Device Overview …………………………………………………………………………………………….……8
5. Download the "smanos home" App …………………………………………………………………11
6. Add the K1/K2 System to the "smanos home" App ……………………………………………12
7. Set Up Your K1/K2 Smart Hub ………………………………………………………………………………12
8. K1/K2 Smart Hub Light Indicator Color Meaning ………………………………………………15
9. App Operation ………………………………………………………………………………………………………17
9.1 K1/K2 Main Page ……………………………………………………………………………………………18
9.2 Accessories Page ……………………………………………………………………………………………19
9.3 Customize Your Own Accessories …………………………………………………………………21
9.4 Setting Page ……………………………………………………………………………………………………23
10. Recommended Placements……………………………………………………………………28
11. Installation …………………………………………………………………………………………………………30
12. Reload the Batteries of Accessories ..…………………………………………………………...31
13. Z-Wave (Available only for K2 Hub)…………………………………………………………………...31
14. Specifications ………………………………………………………………………………………………………32

4
Things to Note before Getting Started
Thank you for choosing smanos to help you take control of your home. The smanos
family of Home Alarm Systems is designed to be self-monitored and help you
become more active in securing your home without a high investment. We aim to
provide a safe, easy & cost effective solution for you to protect your home & loved
ones 24/7/365.
This system is an auxiliary system, it is not designed to provide complete protection
from property loss. smanos will not be held responsible in the event that property
loss occurs while this system is in operation.
High-speed WiFi Internet Connection
One critical factor that can affect the performance of your device is the position
between your home WiFi router and the Hub. Set up your Hub in an open space (DO
NOT place it directly on the oor); the closer the Hub is to the router, the stronger
the WiFi signal will be.
Please be sure to connect you Hub to WiFi using the 2.4GHz spectrum as this is a
larger spectrum and the Hub does not support the 5GHz option which has been
found to be the most common mistake when setting up the your Hub for the rst
time.
SSID and Password
- Check your WiFi network name and the password. The WiFi network name is
normally referred to as the SSID. The password or security ID is normally the next
line or two down from the WiFi/SSID network name. These can be easily found on
your WiFi router if you did not change them when you rst installed the WiFi router,
for example:
- WiFi/SSID Network Name: XXXX
WiFi/SSID Network Password/Security Key: XXXXXXXXXXXXXX
Operating System Requirements
- iOS 8.0 or above with iPhone 5 or above;
- AndroidTM 5.0 or above

5
How the K1/K2 System Works
How the K1/K2 System Works
K1/K2 sends push
notification to your
phone
When Motion
Sensor detects
motion it sends
signal to K1/K2
Hub
When
Door/Window
Sensor detects
door/window
opening, it sends
signal to K1/K2 Hub
When K1/K2 Hub has been set to Arm
Mode (The red indicator is on)
Through the
“smanos home”
app, put the
system in Arm
Mode (Please
refer to System
Statuses to see
how)
Through the Keypad, put the
system in Arm Mode
(Please refer to System Statuses
to see how)
K1/K2 sends signal
to sound Indoor
Siren at 104dB
on-site
Through the Keypad, put the
system in Arm Mode
(Please refer to System Statuses to
see how)
When K1/K2 Hub has been set to
Arm Mode (The red indicator is on)
Through the
“smanos home”
app, put the
system in Arm
Mode (Please
refer to System
Statuses to see
how)
When Door/
Window Sensor
detects door/
window opening, it
sends signal to K1/
K2 Hub
K1/K2 sends signal
to sound Indoor
Siren at 104dB on-
site
K1/K2 sends push
notication to your
phone
When Motion
Sensor detects
motion it sends
signal to K1/K2
Hub

6
Included in Your K1/K2 Smart Home System
Included in Your K1/K2 Smart Home System
The accessories in this kit are already paired with your K1/K2 Smart Hub.
K1/K2 Smart Hub x 1
- The heart of the system that receives, processes
and sends signals from & to the wireless sensors
.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while
ignoring motion from your furry little ones under
50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB
siren sound, to deter any would-be intruder
after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password
customizable directly on the app) that can be
used to control the entire system.
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a
door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and
wireless accessories (with corresponding model
numbers on them.)
K1/K2 Hub Power Adapter
Double Sided Tape for the
Hub/Motion/Siren/Keypad
Double Sided Tape for the
Door/Window Sensor
Corner Mounting Bracket
for the Motion Sensor
Screw set for the
Hub/Motion/Siren/Keypad
(optional – double sided
tape can also be used & is
included)
Crowbar
K1/K2 Smart Hub x 1
- The heart of the system that receives, processes and
sends signals from & to the wireless sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while
ignoring motion from your furry little ones under 50
lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB siren
sound, to deter any would-be intruder after a sensor
has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password
customizable directly on the app) that can be used to
control the entire system.
The accessories in this kit are already paired with your K1/K2 Smart Hub.

7
Included in Your K1/K2 Smart Home System
The accessories in this kit are already paired with your K1/K2 Smart Hub.
K1/K2 Smart Hub x 1
- The heart of the system that receives, processes
and sends signals from & to the wireless sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while
ignoring motion from your furry little ones under
50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 104dB
siren sound, to deter any would-be intruder
after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password
customizable directly on the app) that can be
used to control the entire system.
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a
door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and
wireless accessories (with corresponding model
numbers on them.)
K1/K2 Hub Power Adapter
Double Sided Tape for the
Hub/Motion/Siren/Keypad
Double Sided Tape for the
Door/Window Sensor
Corner Mounting Bracket
for the Motion Sensor
Screw set for the
Hub/Motion/Siren/Keypad
(optional – double sided
tape can also be used & is
included)
Crowbar
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a
door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1/K2 Hub and wireless
accessories (with corresponding model numbers on
them.)
K1/K2 Hub Power Adapter
Crowbar
Double Sided Tape for the
Hub/Motion/Siren/Keypad
Double Sided Tape for the
Door/Window Sensor
Corner Mounting Bracket
for the Motion Sensor
Screw set for the Hub/Motion/Siren/
Keypad (optional – double sided
tape can also be used & is included)

8
Devices Overview
K1/K2 Hub Rear View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in
an alarm and push notification.
Tampering
Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering
Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator LED Indicator
Tampering
Switch
LED Indicator
Pin
Pairing Button
Speaker
LED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering
Switch*
Speaker
LED Indicator
WiFi Button
Power ON/OFF
Tampering
Switch* Pin
Pairing Button
Power Port
* Anti-tampering protection ensures that any attempts to move the device results in an alarm and
push notication.
MD-20 Motion Sensor Rear View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in
an alarm and push notification.
Tampering
Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering
Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator
LED Indicator
Tampering
Switch
LED Indicator
Pin
Pairing Button
Speaker
LED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering
Switch*
LED Indicator
Tampering
Switch

9
K1/K2 Hub Rear View
Front View Rear View Inside View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in
an alarm and push notification.
Tampering
Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering
Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator LED Indicator
Tampering
Switch
LED Indicator
Pin
Pairing Button
Speaker
LED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering
Switch*
LED Indicator Slide to Open
Tampering
Switch
SS-20 Indoor Siren Rear View
Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in
an alarm and push notification.
Tampering
Switch
K1/K2 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering
Switch
DS-20 Door/Window Sensor Overview
Inside ViewRear View
LED Indicator
LED Indicator
Tampering
Switch
LED Indicator
Pin
Pairing Button
Speaker
LED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering
Switch*
Tampering
Switch
LED Indicator

10
KP-20 Keypad Overview
Front View Rear View
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface
first. Check all options and how to set it up properly. Then install them on
their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan
the QR codes as below:
Sign Up/In
If you have not registered an account with smanos, please press “Sign up”
just below the “Sign in” icon on the app, and follow the instructions to
create your account first.
★If you do not receive an account verification code in your email inbox
during the registration process, please remember to check your spam/junk
folder and make sure the notice has not been blocked by your service
provider.
Once you have an account with us, please select the “Sign in” icon and
enter your email address and password to log in.
LED Indicator Tampering
Switch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of
K1/K2 system.
Four Non-numeric Keys *
;6ɑ
LED Indicators
Four Non-numeric Keys *
LED Indicators Tampering
Switch
* Non-numeric Keys are used to set the password for changing the status of K1/K2 system.
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a at surface rst.
Check all options and how to set it up properly. Then install them on their assigned
places.
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface
first. Check all options and how to set it up properly. Then install them on
their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan
the QR codes as below:
Sign Up/In
If you have not registered an account with smanos, please press “Sign up”
just below the “Sign in” icon on the app, and follow the instructions to
create your account first.
★If you do not receive an account verification code in your email inbox
during the registration process, please remember to check your spam/junk
folder and make sure the notice has not been blocked by your service
provider.
Once you have an account with us, please select the “Sign in” icon and
enter your email address and password to log in.
LED Indicator Tampering
Switch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of
K1/K2 system.
Four Non-numeric Keys *
;6ɑ

11
Devices Overview
You can search “smanos home” in App Store or Google Play Store or scan the QR
codes as below:
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface
first. Check all options and how to set it up properly. Then install them on
their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan
the QR codes as below:
Sign Up/In
If you have not registered an account with smanos, please press “Sign up”
just below the “Sign in” icon on the app, and follow the instructions to
create your account first.
★If you do not receive an account verification code in your email inbox
during the registration process, please remember to check your spam/junk
folder and make sure the notice has not been blocked by your service
provider.
Once you have an account with us, please select the “Sign in” icon and
enter your email address and password to log in.
LED Indicator Tampering
Switch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of
K1/K2 system.
Four Non-numeric Keys *
;6ɑ
Sign Up/In
If you have not registered an account with smanos, please press “Sign up” just
below the “Sign in” icon on the app, and follow the instructions to create your
account rst.
* If you do not receive an account verication code in your email inbox during the
registration process, please remember to check your spam/junk folder and make
sure the notice has not been blocked by your service provider.
Once you have an account with us, please select the “Sign in” icon and enter your
email address and password to log in.
Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface
first. Check all options and how to set it up properly. Then install them on
their assigned places.
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan
the QR codes as below:
Sign Up/In
If you have not registered an account with smanos, please press “Sign up”
just below the “Sign in” icon on the app, and follow the instructions to
create your account first.
★If you do not receive an account verification code in your email inbox
during the registration process, please remember to check your spam/junk
folder and make sure the notice has not been blocked by your service
provider.
Once you have an account with us, please select the “Sign in” icon and
enter your email address and password to log in.
LED Indicator Tampering
Switch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of
K1/K2 system.
Four Non-numeric Keys *
;6ɑ

12
Add the K1/K2 System to the “smanos home”
App
Add Device
Press the “+” button on the Device List. Tap on [K1/K2 Smart Hub], then follow the
conguration steps to set up your K1/K2 Hub with your home WiFi.
Add the K1/K2 System to the “smanos home” AppShare Your Device to Family Accounts
Add Device
Press the “+” button on the Device List. Tap on [K1/K2 Smart Hub], then
follow the configuration steps to set up your K1/K2 Hub with your home WiFi.
Tap on [ ] on the main page to enter the Account Menu.
By choosing “My Shares” on the menu and pressing the [ + ] button, you
can share access to your device(s) with other registered smanos accounts
who may not own a smanos product. Enter the email address and nickname
of the account you want to share with, and then select the device(s).
It is highly recommended that you set access limits to those who you may
share your camera(s) with. In choosing not to do so, you grant your family
and/or friends continual access to the camera(s) you have shared.
The user who receives the shared device can only mark the name of the
device, sharing of the device to other users or changing the settings of the
device can not be done.
K1/K2 Main Page
Review the latest
operations or alerts. These
will appear here with the
bottom one being the
most recent.
Change the status of the
K1/K2 system by pressing 1
of the 4 corresponding
icons of the Alarm Status
you wish to select.
Accessories
System Settings
Colors of the background
will indicate the
corresponding System
Status:
Blue: Home Mode
Red: Armed
Green: Disarmed
Flashing red: SOS
SOS Home ModeDisarm Arm
Set Up Your K1/K2 Smart Hub
1. Plug the power adapter into a wall socket and into the K1/K2 Hub, slide the
Power Switch from OFF to ON, wait until the white light ashes blue.

13
2. Connect the K1/K2 to Your Smartphone
Use the Pin to press the WiFi Conguration Button for 3 seconds, the light will ash
red and blue alternately.
3. Go to your phone’s WiFi settings, look for and select "“smanos K1” or “smanos
K2“" hotspot to connect your mobile to the Hub. When connected, return to your
“smanos home” app.
7

14
4. Enter WiFi Details for Your K1/K2 Smart Hub
Select your 2.4GHz WiFi network from the display list, and enter the WiFi network
password. The Hub will connect to the selected WiFi network. This binding process
should take about one minute.
7
When a successful connection is established, the indicator will stop blinking.
Now, your smanos K1/K2 Hub is successfully set, enjoy a smart and secure life!
7

15
K1/K2 Smart Hub Light Indicator Color
Meanings
The different colors shown on the light indicator on the back of the K1/K2 Hub tell
you the device’s current status. Here is a list of what each color or pattern means:
Pattern Description Meaning
The indicator blinks in a white color Hub is booting up
The blue indicator blinks slowly
(once every 2 sec)
Hub is disconnected from a viable
WiFi network
The indicator shows a steady light Hub is connected with a viable WiFi
network
Red and blue blink alternately Hub is in WiFi Conguration Mode
Red, blue and green blink alternately Hub is in Accessory Pairing Mode
Red indicator System is armed
Blue indicator System is armed in Home Mode
Green indicator System is disarmed
System Statuses
System Armed
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in
the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed
in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor, yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System in
Home Mode
Press
the icon
All the K1/K2 sensors detect for anomalies; the indoor siren will sound immediately
when a sensor is triggered. You and other pre-authorized users will receive push
notications on your/their phone.
This mode is recommended for when no one is at home, and can be easily set from
the Keypad or app.
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in
the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed
in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor, yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System in
Home Mode
Press
the icon
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Press
the icon
System
Armed

16
System in Home Mode
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in
the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed
in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor, yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System in
Home Mode
Press
the icon
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely inside your
home without triggering the motion sensor, yet your door/window sensors are still
alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during the
night, and can be set from the Keypad or the app.
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in
the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed
in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor, yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System in
Home Mode
Press
the icon
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
Rotate the Keypad ring to the right rst, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
Press
the icon
System in
Home Mode
System Disarmed
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in
the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed
in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor, yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System in
Home Mode
Press
the icon
All the sensors stop detecting except any sensors that you may have set to 24 Hour
Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors
in the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed in 24
Hour Mode will keep working regardless of system status.
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode (that is, alarm regardless of the system state 24/7, refer to page 21). Sensors in
the 24 Hour Mode are continuously monitoring a particular area, kitchen or
laundry room. Some examples would be a WI-20 Water Sensor (need to purchase
separately) near a washing machine, hot water heater or dishwasher or a DS-20
Door/ Window Sensor on a medicine cabinet or your safe. Any sensor placed
in 24 Hour Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app. Rzefer to page 22
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1/K2 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor, yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
System in
Home Mode
Press
the icon
KP-20 Keypad Operating Steps APP Operating
Step
K1/K2 Hub
Indicator
Rotate the Keypad ring to the left, and then enter the Keypad
password (Press the left top key for 6 times).
Press
the icon
System
Disarmed
Note: The Keypad password can be changed on the “smanos home” app. Refer to page 22

17
App Operation
Device List Page
Once you nished the network setting for your K1/K2 Smart Hub, it will appear on
the Device List Page.
7
Edit the devices
When the status bar turns light, it means the device is
ONLINE and available.
If it's gray, it means the device is OFFLINE and cannot be
accessed.
This icon on the left of your device indicates that the device
was shared to you by family or friends.
Edit Your Device(s)
7
Delete Devices
Tap on the right top Edit button[ ], press the Delete
button [ ] and choose [ ].
Sorting
Tap on the right top Edit button [ ], press and hold the
Sorting button [ ], drag it up or down to the position
where you want it to be located and then release.

18
K1/K2 Main Page
Add the K1/K2 System to the “smanos home” AppShare Your Device to Family Accounts
Add Device
Press the “+” button on the Device List. Tap on [K1/K2 Smart Hub], then
follow the configuration steps to set up your K1/K2 Hub with your home WiFi.
Tap on [ ] on the main page to enter the Account Menu.
By choosing “My Shares” on the menu and pressing the [ + ] button, you
can share access to your device(s) with other registered smanos accounts
who may not own a smanos product. Enter the email address and nickname
of the account you want to share with, and then select the device(s).
It is highly recommended that you set access limits to those who you may
share your camera(s) with. In choosing not to do so, you grant your family
and/or friends continual access to the camera(s) you have shared.
The user who receives the shared device can only mark the name of the
device, sharing of the device to other users or changing the settings of the
device can not be done.
K1/K2 Main Page
Review the latest
operations or alerts. These
will appear here with the
bottom one being the
most recent.
Change the status of the
K1/K2 system by pressing 1
of the 4 corresponding
icons of the Alarm Status
you wish to select.
Accessories
System Settings
Colors of the background
will indicate the
corresponding System
Status:
Blue: Home Mode
Red: Armed
Green: Disarmed
Flashing red: SOS
SOS Home ModeDisarm Arm
Review the latest operations
or alerts. These will appear
here with the bottom one
being the most recent.
Accessories
System Settings
Colors of the background will
indicate the corresponding
System Status:
Blue: Home Mode
Red: Armed
Green: Disarmed
Flashing red: SOS
Change the status of the K1/
K2 system by pressing 1 of
the 4 corresponding icons of
the Alarm Status you wish to
select.
SOS Disarm ArmHome Mode
Door(s) / Window(s) Open Alert
When the K1/K2 system is being armed, you will receive a notication to tell you
if any door or window is open. The armed behavior will be processed even if you
leave these doors or windows open, so it is HIGHLY RECOMMENDED you go to
check and close all these doors or windows, otherwise the system is not 100% in
guard.
7

19
History
7
You can check the latest
300 records of Alarms and
Operations.
The Alarm alerts are in red.
Accessories Page
Press the [ ] button to enter Accessories List.
7

20
Add New Accessory
Tap [ ] icon on the upright corner, choose the corresponding accessory, then follow the
instructions on the app.
7
*You can also pair the accessory
by short pressing the RF button
once on the K1/K2 Hub, wait it
sounds one beep and then press
the tampering switch on the
accessory for 3 times, wait until the
K1/K2 Hub beep once to nish the
pairing.
Accessory Management
The categories (rooms) and the quantity of the assigned accessories in each will show on this
page.
You will see if the accessory is ofine or in a low battery status, there will be a corresponding
notication icon which appears on the category.
7
7
Tap one catogary or room and the assigned accessories would appear and you can check
the battery status of your accessories.
If you want to delete the accessory, just select and slide the accessory to the left and then
choose [ ] icon.
*For deleting all the devices, you can also press and hold the RF button on the K1/K2 Hub and wait until
it sounds a long beep.
+