Smanos K1 User manual

K1
SMARTHOME DIY KIT
QUICK GUIDE
EN DE ESFR PTNL IT

Contents
1. Things to Note before Getting Started …………………………………………………………………3
1.1 High-speed WiFi Internet Connection ……………………………………………………………3
1.2 SSID and Password ………………………………………………………………………………………… 4
1.3 Operating System Requirements ……………………………………………………………………4
2. Get to Know Your UFO Camera ………………………………………………………………………… 4
2.1 UFO Overview …………………………………………………………………………………………………4
2.2 Light Indicators …………………………………………………………………………………………………5
3. Getting Started ………………………………………………………………………………………………………5
3.1 Download the “smanos home” App …………………………………………………………………5
3.2 Sign Up/In …………………………………………………………………………………………………………5
3.3 Add Devices ………………………………………………………………………………………………………6
4. Setting Up Your UFO ………………………………………………………………………………………………7
5. App Operation ……………………………………………………………………………………………………11
5.1 Main Page ………………………………………………………………………………………………………11
5.2 Account Management ……………………………………………………………………………………13
6. App Control …………………………………………………………………………………………………………16
6.1 Live Video Page ………………………………………………………………………………………………16
6.2 Aler ts Page ……………………………………………………………………………………………………18
6.3 Archive Page …………………………………………………………………………………………………20
6.4 Settings Page…………………………………………………………………………………………………22
7. Installation …………………………………………………………………………………………………………29
7.1 Ceiling or Wall- Mounted ………………………………………………………………………………30
7.2 Desk or Any Flat Surface …………………………………………………………………………………31
8. Specifications ………………………………………………………………………………………………………33

How the K1 System Works
K1 sends push
notification to your
phone
When Motion
Sensor detects
motion it sends
signal to K1 Hub
When
Door/Window
Sensor detects
door/window
opening, it sends
signal to K1 Hub
When K1 Hub has been set to Arm
Mode (The red indicator is on)
Through the
“smanos home”
app, put the
system in Arm
Mode (Please
refer to System
Statuses to see
how)
Through the Keypad, put the
system in Arm Mode
(Please refer to System Statuses
to see how)
K1 sends signal to
sound Indoor Siren
at 90dB on-site
Things to Note before Getting Started
Thank you for choosing smanos help you take control of your home. The
smanos family of Home Alarm Systems are designed to be self-monitored alarm
systems and help you become more active in securing your home without a high
investment. We aim to provide a safe, easy & cost effective solution for you to
protect your home & loved ones 24/7/365.
This system is an auxiliary system, it is not designed to provide complete protection
from property loss. smanos will not be held responsible in the event that property
loss occurs while this system is in operation.
High-speed WiFi Internet Connection
One critical factor that can affect the performance of your device is the position
between your home WiFi router and the K1 Hub. Set up your K1 Hub in an open
space (DO NOT place it directly on the oor); the closer the K1 Hub is to the router,
the stronger the WiFi signal will be.
Please be sure to connect you K1 Hub to WiFi using the 2.4GHz spectrum as this
is a larger spectrum and the K1 Hub does not support the 5GHz option which has
been found to be the most common mistake when setting up the K1 for the rst
time.
SSID and Password
- Have your WiFi network name and password handy. The WiFi network name is
normally referred to as the SSID. The password or security ID is normally the next
line or two down from the WiFi/SSID network name. These can be easily found on
your WiFi router if you did not change them when you rst installed the WiFi router,
for example:
- WiFi/SSID Network Name: XXXX
WiFi/SSID Network Password/Security Key: XXXXXXXXXXXXXX
Operating System Requirements
- iOS 8.0 or above with iPhone 5 or above;
- Android 5.0 or above

Included in Your K1 Smart Home System
The accessories in this kit are already paired with your K1 Smart Hub.
K1 Smart Hub x 1
- The heart of the system that receives, processes
and sends signals from & to the wireless sensors.
MD-20 Pet Friendly Motion Sensor x 1
- A sensor that detects suspicious motion while
ignoring motion from your furry little ones under
50 lbs / 23 kg.
SS-20 Indoor Siren x 1
- The siren will go off on-site, with a loud 90dB
siren sound, to deter any would-be intruder
after a sensor has been triggered.
KP-20 Security Keypad x 1
- A device with 4 non-numeric keys (password
customizable directly on the app) that can be
used to control the entire system.
DS-20 Door/Window Sensor x 2
- A sensor that detects the open/close status of a
door or window being protected.
Mounting Base x 4
- Wall-mount bases for the K1 Hub and wireless
accessories (with corresponding model numbers
on them.)
K1 Hub Power Adapter
Double Sided Tape for the
Hub/Motion/Siren/Keypad
Double Sided Tape for the
Door/Window Sensor
Corner Mounting Bracket
for the Motion Sensor
Screw set for the Door
Sensor. (optional – double
sided tape can also be
used & is included)
Screw set for the
Hub/Motion/Siren/Keypad
(optional – double sided
tape can also be used & is
included)

Devices Overview
* Anti-tampering protection ensures that any attempts to move the device results in
an alarm and push notification.
Tampering
Switch
K1 Hub Rear View
MD-20 Motion Sensor Rear View SS-20 Indoor Siren Rear View
Slide to Open
Front View
Tampering
Switch
DS-20 Door/Winsow Sensor Overview
Inside ViewRear View
F
r
o
nt
View
LED Indicator LED Indicator
Tampering
Switch
LED Indicator
Pin
Pairing Button
Speaker
LED Indicator
Power PortPower ON/OFF
WiFi Button
Tampering
Switch*

Advice before Setting Up
Make installing easier and quicker by putting all the devices on a flat surface
first. Check all options and how to set it up properly. Then install them on
their assigned places.
Four Non-numeric Keys
Front View
KP-20 Keypad Overview
Rear View
Download the “smanos home” App
You can search “smanos home” in App Store or Google Play Store or scan
the QR codes as below:
Sign Up/In
If you have not registered an account with smanos, please press “Sign up”
just below the “Sign in” icon on the app, and follow the instructions to
create your account first.
★If you do not receive an account verification code in your email inbox
during the registration process, please remember to check your spam/junk
folder and make sure the notice has not been blocked by your service
provider.
Once you have an account with us, please select the “Sign in” icon and
enter your email address and password to log in.
F
ront
Vi
ew
LED Indicator Tampering
Switch
LED Indicators
* Non-numeric Keys are used to set the password for changing the status of
K1 system.
Four Non-numeric Keys *

Add the K1 System to the “smanos home” Ap
pShare Your Device to Family Accounts
Add Device
Press the “+” button on the Device List. Tap on [K1 Smart Hub], or tap on the
scan icon at the bottom of this page to scan the QR code on the back of
your K1 Hub; then follow the configuration steps to set up your K1 Hub with
your home WiFi.
Tap on [ ] on the main page to enter the Account Menu.
By choosing “My Shares” on the menu and pressing the [ + ] button, you
can share access to your device(s) with other registered smanos accounts
who may not own a smanos product. Enter the email address and nickname
of the account you want to share with, and then select the device(s).
It is highly recommended that you set access limits to those who you may
share your camera(s) with. In choosing not to do so, you grant your family
and/or friends continual access to the camera(s) you have shared.
The user who receives the shared device can only mark the name of the
device, sharing of the device to other users or changing the settings of the
device can not be done.
K1 Main Page
Review the latest
operations or alerts. These
will appear here with the
bottom one being the
most recent.
Change the status of the
K1 system by pressing 1 of
the 4 corresponding icons
of the Alarm Status you
wish to select.
Accessories
Accessory Linkage
System Settings
Colors of the background
will indicate the
corresponding System
Status:
blue: Home Mode
red: Armed
green: Disarmed
SOS Home Mode Disarm Arm
Set Up Your K1 Smart Hub
1. Plug the power adapter into a wall socket and into the K1 Hub, slide the Power
Switch from OFF to ON, wait until the white light ashes blue.
2. Connect the K1 to Your Smartphone
Use the Pin to press the WiFi Conguration Button for 3 seconds, the light will ash
red and blue alternately.
3. Go to your phone’s WiFi settings, look for and select "smanos K1" hotspot to
connect your mobile to the Hub. When connected, return to your “smanos home”
app.

4. Enter WiFi Details for Your K1 Smart Hub
Select your 2.4GHz WiFi network from the display list, and enter the WiFi network
password. The Hub will connect to the selected WiFi network. This binding process
should take about one minute.
When a successful connection is established, the indicator will stop blinking.
Now, your smanos K1 Hub is successfully set, enjoy a smart and secure life!
Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode. Sensors in the 24 Hour Mode are continuously monitoring a
particular area, entrance or item for you such as a water detector a
door/window. Some examples would be a WI-20 Water Sensor near a
washing machine, hot water heater or dishwasher or a DS-20 Door Sensor
on a gun or medicine cabinet or your safe. Any sensor placed in 24 Hour
Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app.
KP-20 Keypad Operating Steps APP Operating
Step
K1 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1 Hub
Indicator
System in
Home Mode
Press
the icon
Recommended Placements
DS-20 Door/Window Sensor:
Can be installed on a door/door
frame, window/window frame or
any other object that can be
opened/closed and needs
detection. There are aligning marks
on the sides of the transmitter and
magnet; make sure the marks face
each other and within the range of
1 cm (0.4”).
MD-20 Pet Friendly Motion
Sensor:
Place the sensor at a location that is
critical for home security at a height
of 2-2.2 meters (6.6'-7.3') from the
ground. Avoid facing swinging
objects, heat, window and door.
K1 Smart Hub:
Place your K1 Hub in an open area
that is located centrally to the whole
smart home system, and within line
of sight of your WiFi router.
KP-20 Security Keypad:
Place the Keypad near the entry of
your home that is convenient for
you to control the system on your
way out/in.
PET-FRIENDLY
MOTION SENSOR
Installation
Step 1: Unlock the base from your
device.
Step 2: Place the base on the wall; make
sure the “UP” arrow on the base is
pointing vertically to the ceiling; use the
provided screws or double sided tape to
install it properly (the green “Level” is a
good reference to keep your device
leveled).
Ste p 3: Lock your device onto the base.
K1 Smart Hub Light Indicator Color Meanings
The different colors shown on the light indicator on the back of the K1 Hub
tell you the device’s current status. Here is a list of what each color or pattern
means:
Pattern Description
The indicator blinks in a white color
Red and blue blink alternately
Red, blue and green blink alternately
Red indicator
Blue indicator
Green indicator
The blue indicator blinks slowly
(once every 2 sec)
The indicator shows a steady light
Meaning
Hub is booting up
Hub is in WiFi Configuration Mode
Hub is in Accessory Pairing Mode
System is armed
System is armed in Home Mode
System is disarmed
Hub is disconnected from a viable
WiFi network
Hub is connected with a viable WiFi
network
;6ɑ

Rotate the Keypad ring to the left, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right, and then enter the
Keypad password (Press the left top key for 6 times).
Rotate the Keypad ring to the right first, then to the left, and then
enter the Keypad password (Press the left top key for 6 times).
System Disarmed
All the sensors stop detecting except any sensors that you may have set to
24 Hour Mode. Sensors in the 24 Hour Mode are continuously monitoring a
particular area, entrance or item for you such as a water detector a
door/window. Some examples would be a WI-20 Water Sensor near a
washing machine, hot water heater or dishwasher or a DS-20 Door Sensor
on a gun or medicine cabinet or your safe. Any sensor placed in 24 Hour
Mode will keep working regardless of system status.
Note: The Keypad password can be changed on the “smanos home” app.
KP-20 Keypad Operating Steps APP Operating
Step
K1 Hub
Indicator
System
Disarmed
Press
the icon
System Statuses
System Armed
All the K1 sensors detect for anomalies; the indoor siren will sound
immediately when a sensor is triggered. You and other pre-authorized users
will receive push notifications on your/their phone.
This mode is recommended for when no one is at home, and can be easily
set from the Keypad or app.
KP-20 Keypad Operating Steps APP Operating
Step
K1 Hub
Indicator
System
Armed
Press
the icon
System in Home Mode
Only the Motion Sensor in this kit will stop detecting (default setting; can be
changed on the app), which enables you and your family to move freely
inside your home without triggering the motion sensor yet your
door/window sensors are still alert and protecting the perimeter.
This mode is recommended for when someone is at home, such as during
the night, and can be set from the Keypad or the app.
KP-20 Keypad Operating Steps APP Operating
Step
K1 Hub
Indicator
System in
Home Mode
Press
the icon
App Operation
Device List Page
Once you nished the network setting for your K1 Smart Hub, it will appear on the
Device List Page.
Edit the devices
When the status bar turns into blue, it means the device
is ONLINE and available.
If it's gray, it means the device is OFFLINE and cannot be
accessed.
Edit Your Device(s)
Delete Devices
Tap on the right top Edit button[ ], press the Delete
button [ ] and choose [ ].
Sorting
Tap on the right top Edit button [ ], press and hold the
Sorting button [ ], drag it up or down to the position
where you want it to be located and then release.

K1 Main Page
Add the K1 System to the “smanos home” AppShare Your Device to Family Accounts
Add Device
Press the “+” button on the Device List. Tap on [K1 Smart Hub], or tap on the
scan icon at the bottom of this page to scan the QR code on the back of
your K1 Hub; then follow the configuration steps to set up your K1 Hub with
your home WiFi.
Tap on [ ] on the main page to enter the Account Menu.
By choosing “My Shares” on the menu and pressing the [ + ] button, you
can share access to your device(s) with other registered smanos accounts
who may not own a smanos product. Enter the email address and nickname
of the account you want to share with, and then select the device(s).
It is highly recommended that you set access limits to those who you may
share your camera(s) with. In choosing not to do so, you grant your family
and/or friends continual access to the camera(s) you have shared.
The user who receives the shared device can only mark the name of the
device, sharing of the device to other users or changing the settings of the
device can not be done.
K1 Main Page
Review the latest
operations or alerts. These
will appear here with the
bottom one being the
most recent.
Change the status of the
K1 system by pressing 1 of
the 4 corresponding icons
of the Alarm Status you
wish to select.
Accessories
Accessory Linkage
System Settings
Colors of the background
will indicate the
corresponding System
Status:
blue: Home Mode
red: Armed
green: Disarmed
SOS Home Mode Disarm Arm
Door(s) / Window(s) Open Alert
When the K1 system is being armed, you will receive a notication to tell you if any
door or window is open. The armed behavior will be processed even if you leave
these doors or windows open, so it is HIGHLY RECOMMENDED you go to check
and close all these doors or windows, otherwise the system is not 100% in guard.
History
You can check the latest
300 records of Alarms and
Operations.
The Alarm history are in
red.
Accessories Page
Press the [ +] button to enter Accessories List.