SMART-AVI EZ-WALL 2X2L User manual

1
Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131
EZ-WALL 2X2L
User Manual
2x2 HD Video Wall Controller
2X HDMI and VGA Input
Integrated USB Media Player
Multi-Format Video Wall Controller

2
TABLE OF CONTENTS
WHAT'S IN THE BOX? 2
INTRODUCTION 3
FEATURES 3
APPLICATIONS 3
TECHNICAL SPECIFICATIONS 4
HARDWARE INSTALLATION 5
FRONT PANEL CONTROL 6
IR REMOTE CONTROL 7-8
CONTROL VIA ETHERNET 9-11
LIMITED WARRANTY STATEMENT 12
WHAT'S IN THE BOX?
PART NO. QTY DESCRIPTION
EZW2X2L-S 1 EZ-WALL 2X2L Video Wall Controller
PS12VDC5A 1 Power Adapter
SAVI-RMT 1 IR Remote Control
SM-EYE2 1 IR Receiver
1 Quick Start Guide
Figure 2-1
Brackets for mounting this device in a standard 19” rack can be ordered from SmartAVI.

3
INTRODUCTION
The EZ-WALL 2X2L offers top-notch HD HDMI output for five different types of signal inputs. Create strik-
ing 2x2 wall displays easily with simple signal-switching and flexible connectivity. The EZ-WALL 2X2L even
features a fully-integrated USB media player.
Capable of expanding any supported video input to four large-scale screens at 1080p, the EZ-WALL 2X2L
showcases stunning picture quality. In this guide, you will learn how to install and optimize your experi-
ence with the EZ-WALL 2X2L using basic steps. We will cover setting the hardware up, activating and con-
necting your systems, and offer helpful tips on how to best use EZWall-Pro’s excellent selection of picture
modes to enhance your video wall.
FEATURES
 Four screen (2x2) multi-Layout, multi-format video wall controller
 Outputs: (4) HDMI
 Inputs: (2) HDMI, (1) VGA
 Integrated USB Media Player for digital video, imagery and audio
 Internal EDID learning
 1080p (1920x1080 @ 60Hz) Full HD resolution output
 No additional hardware or software required
 Supports control via Front Panel Buttons
 Supports control via IR Remote control
 Supports control via TCP/IP
 HDCP and HDMI 1.4 compliant
APPLICATIONS
 Corporate or Educational Presentations
 Airport Installations
 Wall Displays
 Digital Signage
 Dealer Rooms
 Control Rooms
 Shopping Centers
 Security
 Point-of-Sale
 Entertainment Venues
 Corporate Lobbies
 Restaurants

4
TECHNICAL SPECIFICATIONS
VIDEO & AUDIO
Output Resolutions Up to 1080P (1920x1080@60Hz)
Input Resolutions Up to 1080P (1920x1080)
Outputs (4) HDMI
Inputs (2) HDMI, (1) VGA, (2) USB 2.0 Type A
HDCP Compliance 1.0/2.0
Audio (1) 3.5 mm input, (1) 3.5 mm output
CONTROL
Front Panel Buttons
IR Remote Control SAVI-RMT
Ethernet (TCP/IP) RJ-45
OTHER
Power PS12VDC5A
Dimensions 7.5” W x 2” H x 8.25” D
Weight 2.8 lbs.
USB MEDIA PLAYER USB player requires the IR Remote Control for navigation and me-
dia selection.
Signal Type USB 2.0, 1.1, and 1.0 (Type A)
Video Formats * MJPEG, MPEG-1, MPEG-2, MPEG-4, Vvid, DivX H.264
Max Resolution 1920x1080 @30fps
Max Data Rate 20 Mbps
Audio Formats * MP3, WMA, AAC, MP2, PCM, AC3
Photos Max Resolutions * JPEG - 15360x8640, BMP - 9600x6400, PNG - 9600x6400
*PLEASE NOTE: EZ-WALL 2X2L only supports the primary formats listed above. Any unlisted formats are not
compatible with EZWall-Pro.

5
HARDWARE INSTALLATION
1. Position EZ-WALL 2X2L conveniently and keep it unplugged
2. Connect HDMI output cables between the EZ-WALL 2X2L and your video wall screens
3. Connect any input to their corresponding signal source input connector (Blu-Ray player, computer, etc)
4. Optionally connect the IR EYE (receiver) to the IR input jack on the EZ-WALL 2X2L
5. Optionally connect an audio source to the audio input jack on the EZ-WALL 2X2L.
6. Optionally connect an Ethernet cable for additional control over your LAN or the internet (TCP/IP)
7. Optionally connect USB storage devices
8. Optionally connect Speakers. (You can use sound via HDMI instead if your systems support this.)
9. Turn on the EZ-WALL 2X2L and wait a few seconds for the unit to initialize.
Note: The EZ-WALL 2X2L uses it’s own default internal EDID.
The HDMI EDID is named “CNDLCD” & the VGA EDID is named “FULL HD”.
Figure 5-1
Figure 5-2

6
VIDEO WALL MODE
An Image can be displayed
across four HD screens
2X2.
Figure 6-1
CLONE MODE
The image can be dis-
played on each display in-
dividually.
Figure 6-2
FRONT PANEL CONTROL
To switch between listed sources, press:
1. VGA
2. HDMI 1
3. HDMI 2
4. USB 1
5. USB 2
To switch to Video Wall mode,
press the WALL button.
To switch to Clone mode, press
the CLONE button.
Pressing the LOCK button will
Disable the other buttons.

7
* Note that when not using all four displays the unused displays will be
a clone of output #1
** The USB player requires the IR Remote Control for navigation and
media selection.
Source Port Numbers:
1. VGA
2. HDMI 1
3. HDMI 2
Table 7-1
IR REMOTE CONTROL
BUTTON DESCRIPTION
WALL Video Wall Mode (Figure 6-1)
CLONE Clone Mode (Figure 6-2)
M1 LOCK or UNLOCK (Disables or enables
all other buttons)
SOURCE
Pressing SOURCE followed by pressing a
number will select the source port num-
ber. (Table 7-1)
F1 1X2 Mode * (Page 8, Figure 8-1)
F2 2X1 Mode * (Page 8, Figure 8-2)
USB PLAYER REMOTE CONTROL **
BUTTON DESCRIPTION
While Navigating ON Screen Menus
USB Pressing USB followed by pressing number 1 or 2
will select the USB port.
[OK] Center Button Enter or Select
CH+ Navigate UP
CH- Navigate DOWN
Navigate LEFT
Navigate RIGHT
While Videos or Pictures are displayed
[OK] Center Button DISPLAY MENU
CH- TURN OFF MENU
VOLUME UP
VOLUME DOWN

8
IR REMOTE CONTROL (Continued)
Figure 8-2
2X1 Mode
(F2 Button)
Figure 8-1
1X2 Mode
(F1 Button)
Note that when not using all four
displays the unused displays will be
a clone of output #1

9
CONTROL VIA ETHERNET
EZ-WALL 2X2L TCP/IP control is a feature that allows mode switching and other configurations to be con-
trolled remotely via HTTP. Manage your EZ-WALL 2X2L with ease from anywhere in the world.
First you must find the IP address for the EZ-
Wall-Pro. Finder.exe (Smart IP-Finder) is con-
veniently available on our website; please
visit www.smartavi.com/helpful-links.html
for this and our full list of compatible third-
party software. Download and execute the
IP address Finder software for your product.
The EZ-WALL 2X2L and its IP address should
appear in the display as shown in Figure 9-1.
Figure 9-1
Enter the IP address into a web browser
of your choice. You should see the EZ-
WALL 2X2L Home/Welcome page as
shown in Figure 9-2.
Figure 9-2

10
CONTROL VIA ETHERNET (Continued)
Click on the LOG IN tab in the top tool bar.
Enter the User ID and Password in the Login page.
The User ID and Password are case sensitive.
User ID = admin, Password = 1234
You can change the User ID and password by clicking the ADMINISTRATION Tab. See Figure 10-1
Figure 10-1
Click the Network Settings tab in the top toolbar to configure your network settings.
See Figure 10-2.
Figure 10-2