SMART-AVI D2H-4P Quad User manual

D2H‐4PQuad
Quick Start Guide
800.AVI.2131
Tel: [phone] |Fax: [phone]
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
WHAT’S IN THE BOX
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20160930
Access and control KVM on up to 4
computers with USB 2.0 and Audio
Sharing, using one USB keyboard, one
USB mouse and 4 DisplayPort
monitors
4-Port Quad DisplayPort KVM Switch
with USB 2.0 and Audio Sharing
PART NO. QTY DESCRIPTION
D2H-4P-QUAD 1
4-Port Quad DisplayPort KVM
Switch with Audio and USB 2.0
Sharing
PS5VDC4A 1 Power Adapter External 100-
240 VAC/5VDC4A
BRK-QUAD 2 Rack mount brackets (Optional)
1 Quick Start Guide
TECHNICAL SPECIFICATIONS
VIDEO
Link Rate 5.4 Gbps
Input Interface (16) DisplayPort (female) Version
1.2
Output Interface (4) HDMI (female) Version 1.4
Resolution Up to 4K (3840x2160 @ 30Hz)
Input Equalization Automatic
Video Bandwidth Single-link 340MHz [10.2Gbps]
HDCP Compliant Yes
Input/Output Max
Cable Length 40 ft.
CONTROL
Front Panel
Buttons, Select/Switch between
sources and view the current se-
lected channel.
RS-232 DB9 Female - 9600 N,8,1, No flow
control
Hot Keys Via Keyboard, Select/Switch be-
tween Video & Audio sources
Emulation Keyboard, Video and Mouse
OTHER
Power Adapter External 100-240 VAC/ 5VDC4A
Dimensions 4.5” H x 5.75” D x 12.75” W
Weight 5.75 lbs.
Operating Temp. +23 to +95°F (-5 to +35°C )
Operating Humidity 5 to 90% (No Condensation)
Storage Temp. -4 to -185°F (-20 to -85°C)
Storage Humidity 10% to 85% (no condensation)
USB
Signal Type USB 2.0, 1.1, and 1.0 w/ internal
hub
Input Interface (4) USB Type B (female)
Output Interface
(2) USB 1.1 Type A female for
keyboard and mouse;
(2) USB 2.0 Type A female Trans-
parent
AUDIO
Input Interface (4) 3.5 mm Stereo Audio
Output Interface (1) 3.5 mm Stereo Audio
Impedance 600 Ohm
Frequency Re-
sponse 20 Hz to 20 kHz
Nominal Level 0-1.0 V
Common Mode Rejection at 60 dB
Brackets for mounting this device in a standard 19”
rack may be optionally ordered from Smart-AVI.

HARDWARE INSTALLATION
1. Turn off all devices.
2. Connect speakers to the audio out jack on the D2H-4P Quad.
3. Connect a USB keyboard and Mouse to the USB ports marked with keyboard and mouse symbols.
4. Connect up to 4 computers with USB Type A to USB Type B cables to the D2H-4P Quad.
5. Connect up to 4 computers with 3.5 mm stereo audio cables to the D2H-4P Quad.
6. Connect up to 4 computers with up to 4 DisplayPort outputs each to the D2H-4P Quad.
7. Connect up to 4 Monitors with HDMI Cables to the D2H-4P Quad.
8. Optionally connect an RS-232 straight thru cable to the D2H-4P Quad for additional control.
9. Turn on all connected devices except for the D2H-4P Quad.
10. Turn on the D2H-4P Quad.
INTRODUCTION
D2H-4P-Quad is a dedicated multi-platform KVM
switch capable of managing 4 computers with up to 4
DisplayPort outputs each through a single, central
workstation. Built with ultra-HD ready HDMI outputs.
The D2H-4P-Quad is the first DisplayPort switch on
the market to offer full video emulation directly from
the device. Up until now, DisplayPort switches lost
emulated picture when disconnected from monitors,
leading to confusion and disorganization upon recon-
necting. With the D2H-4P-Quad, full EDID assisted
HDMI video emulation ensures visual workspaces and
screen resolutions are remembered every time: sim-
ple!
The D2H-4P-Quad is DisplayPort 1.2 and HDMI 1.4
compliant, supporting screen resolutions up to 4K
Ultra-HD (3840x2160 @ 30Hz) for remarkable and
responsive video emulation. Additionally, the D2H-4P-
Quad is USB peripheral-friendly, compatible with print-
ers, keyboards, and mice. The D2H-4P-Quad is also
easy to control with both a simple front-panel inter-
face, as well as RS-232 functionality.
SOURCE SWITCHING MADE EASY
The D2H-4P-Quad offers switching between four Dis-
playPort equipped computers. This dynamic KVM con-
sole can be controlled via hot keys or RS-232 com-
mands, as well as directly through the console’s easy-
to-read front panel.
EDID PASS-THROUGH AND RECOGNITION
The D2H-4P-Quad features EDID Pass-Through tech-
nology and source recognition, which enables smooth
and efficient switching in virtually any scenario. This
plug-and-play EDID functionality makes set up hassle
free and simple.
FULL USB KEYBOARD AND MOUSE EMULATION
The USB keyboard and mouse emulation utilized by
D2H-4P-Quad provides quick source switching via
keyboard hot keys. D2H-4P-Quad simulates the pres-
ence of a keyboard and mouse for every attached
computer through a USB cable. This essential func-
tion simulates keyboard, video, and mouse control for
all connected computers, so switching between each
is kept seamless.