SMART-AVI HDR8x8 LP User manual

HDR-8X8
Quick Start Guide
800.AVI.2131
Tel: [phone] |Fax: [phone]
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
NOTICE
The information contained in this document is subject
to change without notice. SmartAVI makes no
warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20170523
The HDR 8x8 allows users to
route content from any eight
HDMI sources on any eight
displays independently up to 20
feet away
HDMI 8x8 Matrix Switcher
TECHNICAL SPECIFICATIONS
VIDEO
HDTV Resolutions 480p, 720p, 1080i, 1080p
TV Resolution 480i
Input Interface 8 HDMI Type A 19-pin Female
TMDS
Output Interface 8 HDMI Type A 19-pin Female
TMDS
Input Cable
Length Up to 20 ft.
Output Cable
Length Up to 20 ft.
OTHER
Warranty Limited 1 Year Parts and Labor
Control Front Panel, RS-232
Power Internal 100-240 VAC
Dimensions 19”W x 5.25”H x 7”D
Weight 10 lbs.
Operating Temp. 0 to +40°C (+32° to +104° F)
Operating Humid-
ity 10% to 85% (Non-condensing)
Storage Temp. -20° to +60°C (+20° to +140° F)
Storage Humidity 10% to 85% (Non-condensing)
HDR 8X8 Approv-
als FCC, CE, RoHS Compliant
Power Supply
Approvals UL, CE, CSA, CEC, RoHS
WHAT’S IN THE BOX?
PART NO. QTY DESCRIPTION
HDR8X8S 1 HDMI 8x8 Router
CCPWR06 1 6ft Power Cord
1 Quick Start Guide
IMPORTANT: Each input and output can support up to
10mA/5VDC. Do not connect extenders that are pow-
ered by HDMI.

HDR 8X8 Rear View
USING THE FRONT PANEL CONTROLS
During normal operation, you will see a list of ports on
the front panel display.
To assign an output to an input, press [SWITCH]. A
blinking block cursor will appear. Use [UP] and
[DOWN] to select the input that you would like to as-
sign. Once the cursor is over the desired input port,
press [ENTER] to enter editing mode. Press [UP] and
[DOWN] to select the output port. Once you have se-
lected an output, press [ENTER] to save the configura-
tion. To escape from editing mode, press [ESC].
Because HDCP takes time to negotiate, when switch-
ing ports, wait 2 seconds for the process to complete.
Failure to do so may cause an error with the HDCP
and the HDR-8X8 may lock up.
NOTE: To lock the front panel buttons to avoid any
accidental changes, press [ESC] + [MENU] + [ENTER]
+ [SWITCH] at the same time. The display will indicate
that it is locked. Repeat the procedure to unlock the
front panel.
INTRODUCTION
The HDR 8x8 conforms to the HDMI standard and
provides a connection to view any eight HDMI video
sources on any combination of eight video displays.
The matrix configuration allows switching between
any HD source and/or display. The HDR 8x8 provides
HDMI output up to 20 feet and at HDTV resolutions
up to 1080p.
HARDWARE INSTALLATION
1. Turn off all input devices and displays.
2. Connect the input devices to the “IN” ports on the HDR-8X8
3. Connect the displays to the “OUT” ports on the HDR-8X8.
4. Connect the power cord and power-on the HDR-8X8.
5. Power on the input devices and the displays.
NOTE: Each input and output can support up to 10mA/5VDC. Do not connect extenders that are powered by HDMI.