Smart Comfort DELTA User manual

DELTA
MASSAGE CHAIR
QUICK START GUIDE &
OPERATING INSTRUCTIONS

QUICK START GUIDE
Remove your shoes and sit into the chair. You
can press down with your feet to extend the
footrest length. It is recommended to use the
massage chair without wearing jewellery or
watches.
Press the power button on the remote control,
and allow the chair 20-30 seconds to calibrate
for your body size. Place your arms inside the
arm rests.
The chair will automatically enter an automatic
massage mode if no buttons are pressed.
You can enjoy this mode as it is, or read these
operating instructions to learn about more
advanced operation.

• Power button turns the chair
on & o. Wait 20-30 seconds
for the chair to calibrate size
and position, then select a
mode on the remote control.
The chair will automatically
enter Comfort auto mode if
no options are selected.
• Adjust shoulder up & down
arrows adjust how far up
the shoulders the rollers
will travel during shoulder
focused movements.
BASIC CONTROLS

Used for selecting the position
of the chair:
• Zero button moves the chair
into zero gravity horizontal
position
• Up & down arrows change
the footrest height
• Left & right arrows adjust
the backrest recline position
• Foot roller button switches
the foot roller between 3
speeds
(or o.)
CHAIR POSITION CONTROLS

Used for selecting the
following automatic massage
modes:
• Ache relieve focuses
primarily on the neck and
shoulders
• Comfort is a gentle mode
that targets the whole body
• Upper body focuses on the
upper body
• Relax focuses mainly on
lower back, legs & feet
• Demo is a full-body
massage, using functions
from all modes
• Lower body focuses on the
lower body
AUTOMATIC MODE CONTROLS

MANUAL MODE &
ADJUSTMENT CONTROLS
Used for controlling the
following functions during
manual operation:
• Mode changes massage
techniques between the
following, or o:
• Speed adjusts the speed of
the massage rollers during
manual modes
• Width adjusts the width
between rollers during
shiatsu, tapping or knocking
modes
kneading
shiatsu
tapping
kneading + tapping
knocking

MANUAL MODE &
ADJUSTMENT CONTROLS
H0 fixed position back massage
H1 short area back massage
H2 entire back massage
H3 upper back massage
H4 lower back massage
• Back stretch toggles back massage modes between:
• The arrows either side of back stretch can be held down to
adjust the position of rollers during H0 and H1 back modes.
• Air Mode toggles airbag function
between: arms, feet, arms + feet or o*
• Air Power adjusts the intensity of pressure from the airbags*
• Back Heat turns the infrared back heating on/o*
*can also be adjusted during automatic modes.
MEMORY FUNCTION
To save the current massage settings, press the power button
to turn the chair o, and press & hold M1 or M2 for 3 seconds
while the screen is displaying “Memory.” When the chair is
on, press and hold M1 or M2 for 3 seconds to load the saved
massage settings.
(M1 and M2 share the same button as Upper Body and Lower Body.)

Health and Safety Warnings: Do not drop or push anything into any slot of the machine.
Please stop immediately and consult your doctor if you feel unwell when using this machine.
Not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless supervised. Do not use if
you are pregnant, unwell, or have a pre-existing medical condition. Do not sit on the back,
armrest, or the leg rest as it may result in damage or injury. Do not press or put your hands
into the cloth cover of the massage hands.
DELTA MASSAGE CHAIR
Keep at least 50mm of clear space between the chair backrest and nearby walls or furniture
to ensure there is no contact with any items when chair is fully reclined.