Smart-M DVN-2P User manual

DVN‐2P
Quick Start Guide
800.AVI.2131
Tel: [phone] |Fax: [phone]
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
PART NO. QTY DESCRIPTION
DVN-2PS 1 2X1 DVI-D, Audio switch
PS5VDC2A 1 Power Adapter
1 Quick Start Guide
WHAT’S IN THE BOX
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20161028
2-Port KVM Switch
with Stereo Audio
TECHNICAL SPECIFICATIONS
VIDEO
Format DVI-D Single Line
Maximum Pixel Clock 165 MHz
Input Interface (2) DVI-D 29-pin female
Output Interface (1) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC 5 volts p-p(TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
AUDIO
Frequency Response 20 Hz to 20 KHz
Impedance 600 ohm
Nominal Level 0-1.0 V
Common Mode Rejection at 60dB
Input Interface (2) 3.5 mm Stereo Audio
Output Interface (1) 3.5 mm Stereo Audio
CONTROL
Front Panel Button
RS-232 DB9 Female, 9600 bps, N, 8 1,
No flow control
OTHER
Power Supply 5VDC2A
Weight .65 lbs.
Dimensions 6.75”W x 3.75”D x 1.8”H
Approvals UL, CE, ROHS Compliant
Operating Temp. 32 to 131°F (0 to 55 °C)
Storage Temp. -4 to 185 °F (-20 to 85 °C)
Humidity Up to 95% (No Condensation)
USB
Signaling USB 2.0, 1.1 and 1.0 w/ Internal
Hub
Output Interface (2) USB Type A
Input Interface (2) USB Type B
Emulation No Keyboard or Mouse Emula-
tion
Control 2 Computers, PC or Mac
on one DVI-D Display Up To 20
Feet Away with USB 2.0 Keyboard
and Mouse, Stereo Audio and RS-
232 Remote Control

INSTALLATION DIAGRAM
INSTALLATION
1. Turn off all computers and the display.
2. Connect the DVI extension cables and USB cables (not included) to the computers and to the “IN” ports on the
DVN-2P.
3. Optionally connect Audio cables (not included) to the computers and to the “IN” ports on the DVN-2P.
4. Connect the display to the “OUT” DVI connector on the DVN-2P.
5. Connect a mouse and keyboard, to the “OUT” USB connectors on the DVN-2P.
6. Optionally Connect speakers to the “OUT” audio connector on the DVN-2P.
7. Connect the power cord and power on the DVN-2P.
8. Power on the computers and the display.
9. Use the front panel buttons or an RS-232 connection to select the desired input port.
NOTE: THE USB OPERATION OF THE DVN-2P IS FULLY TRANSPARENT. TO ATTACH ADDITIONAL USB DEVICES A USB
HUB MAY BE USED.
Switching Between Ports
There are two ways to switch between inputs on the DVN-2P. Via the front panel buttons or via an RS-232 connec-
tion.
Front Panel Control
To switch ports using the front panel, press the Select button to cycle through the available ports. The selected port
number will be indicated by an illuminated LED.
RS-232 Control
To switch ports using an RS-232 connection, use a serial cable to connect a computer to the DVN-2P’s RS-232 port.
Use a terminal program like PuTTY to connect to the DVN-2P. Use the standard communication mode of 9600bps,
8, N, 1, No Flow Control.
To select the “IN 1” port, send “//M01 [ENTER]”
To select the “IN 2” port, send “//M02 [ENTER]”
To learn DDC from the connected monitor, send “//E [ENTER]”
Introduction
The DVN-2P is a cross-platform KVM switch capable
of sharing one DVI-D Monitor between two computers,
PC or Mac. Switch between and control two com-
puters equipped with DVI-D on a single screen, saving
money and desktop space.
Features
 Supports Mac, PC, Linux and Sun DVI-D
 Supports High Resolution1920x1200 60 Hz
WUXGA
 Uses universal DVI Single Link connectors
 Zero pixel loss with TMDS signal correction
 Output DVI up to 20 feet
 Front panel switch with LED indicator
 Saves space on your desktop
DDC Learning
The DVN-2P is fully capable of “learning” and remem-
bering what type of display monitor is connected to
the unit. Programming the DDC (Display Data Chan-
nel) is accomplished using the button located on the
front panel.
1. Unplug all devices except the screen.
2. Press and hold the front button
3. Plug in the power
4. When the 3 LEDs illuminate, let go of the front
button.
5. Continue to wait until both LEDs flicker, indicating
that the DVN-2P has learned the SCREEN mode.
6. Install all devices and power on.