Smart Solar 15390MM1 User manual

1
Solar Birdbath / Fountain
* Styles may vary but assembly will be consistent with this manual
Birdbath
2-Tier
Fountain
Fountain Heads
Warnings
The 360˚ fountain head
accessory can be used to
enhance your fountain.
Note: It will only work
effectively in bright sunlight
The short nozzle can be used to
produce a finer higher
stream of water.
Note: May need tobe
removed in bright sunlight to
avoid splashing.
Frost causes damage, store whole product inside during cold weather.
0°C/32°F
Important!
Water must be regularly topped off. We recommend regularly changing the
water to ensure it remains clean and free from debris.
Birdbath &Metal Stand
with Ceramic/Concrete Bowl
Birdbath &Metal Stand
with Glass Bowl

2
.
Fill bowl with water.
Fill bowl with water.
Attach metal ring
to frame.
Place Bowl
on rubber caps.
Insert Solar panel/pump.
Open frame.
For Birdbath with
Ceramic or Concrete
Bowl Only:
For Birdbath with
Glass Bowl Only:
Tighten Wingnuts
Open frame. Place Bowl.
Insert Solar panel/pump.
6
Maintenance
If the fountain head, nozzle, or tubes become blocked, rinse
through with water.
To maintain optimum performance, regularly clean the
solar panel using water or glass cleaner in conjunction with
a non-abrasive sponge or cloth.
Important 


!
Connections
Pump Cleaning / Troubleshooting
Filter cover can simply
be pulled apart
as shown.
cover to release as
shown, impeller can
be easily removed
and rinse in water.
Rinse all parts
thoroughly in
water.
Ensure connections
are water tight.
If the pump is not working immediately, try the following
for a manual start. Remove the pump cover. Remove the
impeller cover, face the panel to the sun, and start manually
spinningthe impeller clockwise, this can take 1-3 minutes.

3
Attach bowl to pedestal.
Align the marks and turn
to lock in place.
Attach bowl to pedestal.
Align the marks and turn
to lock in place.
If your fountainincludes
Accents, locate the pin
on the accent pieces and
insert into the holes
around the edge of
the bowl.
If your fountain includes
Accents, locate the pin
on the accent pieces and
insert into the holes
around the edge of
the bowl.
Place the solar
panel/pump assembly
into the reservoir.
See Page 7 on how to
connect upper tier
components.
Place upper tier into
the main bowl.
Fill bowl with water.
Fill bowl with water.

4
.
Position
IMPORTANT!
Position your fountain so that receives direct sunlight. The fountain will NOT work if the solar panel
is in a shaded area.
Warnings
Frost causes damage, store whole product inside during cold weather.
0°C/32°F
Important!
Water must be regularly topped off. We recommend regularly changing the
water to ensure it remains clean and free from debris.
4
.
Position
IMPORTANT!
When reconnecting the pump and panel take care
to ensure that the connectors are water tight. Slightly twist the
connectors when pushing together, ensure the red o-ring
seal remains in it’s groove and it is not displaced.
Important!
Position your fountain so that receives direct sunlight. The fountain will NOT work if the solar panel
is in a shaded area.
Warnings
Frost causes damage, store whole product inside during cold weather.
0°C/32°F
Important!
Water must be regularly topped off. We recommend regularly changing the
water to ensure it remains clean and free from debris.
When reconnecting the plugs ensure that the connections
are water tight. Push the plugs together until they touch
the rubber o-ring, slide the threaded cap over the plug
and turn the cap until tight.
Important!
1
2
3



5
Performance
This product is designed primarily to operate in summer months but will also work in spring and autumn
provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received.
In bright direct sunlight your pump will work well
with a consistent fountain height.
In slightly cloudy conditions your pump will work
however fountain height will vary as clouds pass
in front of the sun.
At night the solar panel does not generate
power and your pump will NOT work.
In overcast conditions the solar panel does not
generate enough power to run the pump and it
will NOT work.
The 360˚ fountain head
accessory can be used to
enhance your fountain.
Note: It will only work
effectively in bright sunlight
or if battery is charged.
The short nozzle can be used to
produce a finer higher
streamof water.
Note: May need to be
removed in bright sunlight to
avoid splashing.
Fountain Heads
5
Performance
This product is designed primarily to operate in summer months but will also work in spring and autumn
provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received.
In bright direct sunlight your pump will work well
with a consistent fountain height.
In slightly cloudy conditions your pump will work
however fountain height will vary as clouds pass
in front of the sun.
At night the solar panel does not generate
power and your pump will NOT work.
In overcast conditions the solar panel does not
generate enough power to run the pump and it
will NOT work.
The 360˚ fountain head
accessory can be used to
enhance your fountain.
Note: It will only work
effectively in bright sunlight.
The short nozzle can be used to
produce a finer higher
streamof water.
Note: May need tobe
removed in bright sunlight to
avoid splashing.
Fountain Heads

6
Maintenance
If the fountain head, nozzle, or tubes become blocked, rinse
through with water.
To maintain optimum performance, regularly clean the
solar panel using water or glass cleaner in conjunction with
a non-abrasive sponge or cloth.
Important
Connections
Pump Cleaning / Troubleshooting
Filter cover can simply
be pulled apart
as shown.
cover to release as
shown, impeller can
be easily removed
and rinse in water.
Rinse all parts
thoroughly in
water.
If the pump is not working immediately, try the following
for a manual start. Remove the pump cover. Remove the
impeller cover, face the panel to the sun,and start manually
spinningthe impeller clockwise, this can take 1-3 minutes.
!
2
.
Fill bowl with water.
Fill bowl with water.
Attach metal ring
to frame.
Place Bowl.
Insert Solar panel/pump.
Affix bolts and
wingnuts, and
attach bowl.
Open frame.
Open frame. Place Bowl.
Insert Solar panel/pump.



Ensure connections
are water tight. Push
together, sliding threaded
cap over the plugs,
turn the cap until tight.
1
2
3

3
Attach bowl to pedestal.
Align the marks and turn
to lock in place.
Attach bowl to pedestal.
Align the marks and turn
to lock in place.
If your fountain includes
Accents, locate the pin
on the accent pieces and
insert into the holes
around the edge of
the bowl.
If your fountain includes
Accents, locate the pin
on the accent pieces and
insert into the holes
around the edge of
the bowl.
Place the solar
panel/pump assembly
into the reservoir.
See Page 7 on how to
connect upper tier
components.
Place upper tier into
the main bowl.
Fill bowl with water.
Fill bowl with water.
7
Pump Removal / Assembly
Birdbath
Fountain Heads
Important
2-Tier Fountain
If you need to remove the pump, turn the top tier upside down.
Pull the pump to separate the tubes. Disconnect the wire by
unplugging it. Unscrew the threaded cap that covers the plugs,
slide it up the wire, then you can pull the plugs apart.
1
2
3
2
3
1
Ensure both tubes (1) are connected so the pump will
remain fully submerged. Slide the rubber bung (2) onto
the tube and move it down until it is half way down the
top tube. Insert the top tube (1) into the bottom of the
solar panel (3) by squeezing the pump and panel
together. Push the rubber bung (2) into the reservoir
hole so it creates a seal. If done correctly, the panel will
not lift out.
2-Tier Fountain Assembly
To ensure the tubes from the pump are
connected to the solarpanel, try lifting the solar
panel gently by pulling on the solar panel nozzle.
If the panel lifts out the tubes are not connected.
See illustration below for assembly.
Important
!
1
2
3
Connect the pump tube to the
underside of the solar panel as
shown and check the plugs to
ensure a water tight seal. Push
the plugs together, slide the
threaded cap over the plugs,
and turn the cap until tight and
no threads are showing.

8
.
Smart Solar is a Smart Living Home & Garden brand
Telephone: + 1 813 343 5775
Email: [email protected]
Web: www.smartlivinghg.com
US Patent 7484671 & EU Patent 1648620
Smart Living Home & Garden warranties your solar panel, pump and battery (for Solar-on-Demand units) for
one (1) year from the original date of purchase from authorized distributors and retailers. The warranty covers
parts that are properly installed and regularly maintained. If the product fails due to a defectinmaterial or
workmanship, SmartLiving will replace the defective parts free of charge. Your fountainis designed for outdoor
use and with proper care willlast for many years. If over time your fountain develops scratches or minor wear
from normal use, youcan contact our customer service department for easy to apply one step touch up paint.
Please unpack and inspect the entire product upon receipt. Report any broken or missing pieces within five (5)
business days of receipt to our customer service department and we will provide replacement parts free of
charge. Please do not discard any damaged parts until instructed to do so by our customer service department.
PROBLEM RESOLUTION (and page for reference)
The fountain isin sun but the pump
is not working.
1. Ensure the connections are secure and that pump tube is
connected to underside of solar panel – see pg 7 for Assembly
2. Pump needs manual start - see pg 6 Pump Troubleshooting
1. Try manual start on pump – see pg 6
2. Ensure the tubes from pump are connected to the underside
of the solar panel - see pg 7 for Assembly
Rubber bung is not securely in place.
1. Push the rubber bung securely into the reservoir hole to
create a seal – see pg 7 for Assembly
No water flow from the top of
the solar panel.
2-Tier Only: Water is coming through
the top of the solar panel, but water is
notoverflowing from the spouts into
the main bowl below.
Thank you forpurchasing thisSmart Solar fountain.
Register yourProductHere:
https://smartlivinghg.com/wp/customer-service/product-registration/
FAQs are available online along with step by step video tutorials to help you with pump
cleaning and solarkit assembly.
Visit: https://smartlivinghg.com/wp/customer-service/faq/
© 2019.1