Smart Solar Sunjet 150 User manual

sunjet 150
sunjet 150
s
olar powered fountain
olar powered fountain
operates in direct sunlight
Stone feature not included
2006 smart solar ltd
2006 smart solar ltd
rev. 66051118_1a
rev. 66051118_1a
If you have any problems, please contact Smart Solar
If you have any problems, please contact Smart Solar
before returning to the place of purchase. For immediate
before returning to the place of purchase. For immediate
answers visit our website www.smartsolar.com where you
answers visit our website www.smartsolar.com where you
will find an extensive trouble shooting section with
will find an extensive trouble shooting section with
frequently asked questions and instant email enquiry forms.
frequently asked questions and instant email enquiry forms.
usa
usa
tel :
tel :
[phone]
email :
email :
[email protected]
uk
uk
tel :
tel :
[phone]
email :
email :
[email protected]
germany
germany
tel :
tel :
[phone]
email :
email :
[email protected]
smart solar ltd, gelderse weg 53, D-46399 Bocholt
europe
europe
email :
email :
[email protected]
australia
australia
tel :
tel :
[phone]
email :
email :
[email protected]
asia/ pan pacific
asia/ pan pacific
email :
email :
[email protected]
www.smartsolar.com
www.smartsolar.com

Solar pump connector
PANEL ADJUSTMENT
SUMMER
0-30
º
ANGLE
SPRING / AUTUMN
30-60
º
ANGLE
ENGLISH
Contents
1. Introduction
2. Before you start
3. Overview
4. Components
5. Assembling and using your product
6. Cleaning and maintenance
7. Trouble shooting
8. Spare parts
9. Full 2 year warranty
Introduction
Thank you for purchasing a Sunjet 150. These instructions contain
important information for using this product. Please keep them in a
safe place for future reference.
Before you start
The Sunjet 150 can be used in a small pond or water reservoir
provided the solar panel receives direct sunlight. A solar panel powers
the pump by converting sunlight into electricity.
The solar panel will power the pump when exposed to direct sunlight.
If the sun passes behind a cloud then the amount of electricity
produced by the panel will decrease and the pump will stop working
or slow down. As soon as the sun reappears from behind the cloud
the amount of electricity will increase instantly and the pump will begin
to work again.
The amount of electricity produced by the solar panel is proportional
to the strength of sunlight received. For optimum performance we
recommend that your solar panel should be exposed to as much
direct sunlight as possible and away from shady areas e.g. under
trees. The panel can also be angled towards the sun to maximise the
amount of light received.
Overview
The Sunjet 150 has been designed for outdoor use. The pump drives
water up through the fountain head and sprinkles down into the
container / main bowl. The water is constantly re-cycled.
Components
1 Solar panel
2 Pump
3 Base with filter
4 2 x extension tubes with fountain head set
5 Solar panel mounting kit
Assembling and Using Your Product
Unpack all components carefully.
Please ensure that you check all parts have been removed from
the packaging especially the solar panel, which is stored in the
bottom of the box.
Decide on a suitable location, bearing in mind there will be some
water splashes when the product is in use.
First unroll the pump cable.
Place the pump into a container/ bowl.
Choose your favourite fountain head and attach it to the pump.
Fill the main bowl with water.
Sunjet 150 ,QVWUXFWLRQ0DQXDO
Insert pump into base
Fountain head set
Remove pump cover
Take out impeller to clean
Impeller Pump cover

Sunjet 150 ,QVWUXFWLRQ0DQXDO
Please note:
In winter the Sunjet 150 must be stored in a dry and frost proof
environment. Alternatively, an optional adapter can be purchased
for occasional indoor use.
The pump must never be operated dry (out of water) as this will
have a permanent adverse affect on the performance of the
pump.
Spare parts
1. Solar panel 21310AS01
2. Panel mounting kit MTGKIT
3. Pump 21400P01
4. Pump impeller IMPELLER
5. Pump cover PCOVER
6. Base with filter 21400BASE
7. Fountain head set 2150FH
Full 2 year warranty
If within 24 months from the date of purchase this product fails
due to a defect in material or workmanship, Smart Solar will
replace or repair free of charge.
Please report immediately if there is any damage or missing
pieces upon receipt of goods.
The warranty does not apply to:
Damage caused by accidents, abuse, poor handling, frost or
normal wear and tear. Products which have been subject to
unauthorized repair or modification.
For further information please contact your nearest customer
service centre detailed on the last page of this manual.
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
Smart Solar reserve the right to modify any product to enhance
its’ performance and design.
ENGLISH
Please Note: We recommend you use distilled or rain water to
prevent scale build up.
Select a suitable location for you solar panel and fix the mounting
as shown. Connect the panel and pump together.
IMPORTANT
To ensure the seal remains water-tight twist the pump and panels
connectors together rather than merely pressing them together.
The Sunjet 150 is now ready to use.
Please note: On first use there maybe air in the pump. It can take
up to 5 minutes until all the air is expelled and water begins to
sprinkle through the fountain head.
Cleaning and Maintenance
Pump: If, after a period of time, the pump starts to lose power or
stops working check for the build up of sediment, scale or dirt in
the filter and in the bottom of the pump housing. Remove the
pump cover at its’ base. Take out the impeller and remove any
sediment, scale or dirt that has built up. Replace the impeller and
replace the pump cover.
Solar panel: The panel should be cleaned periodically with a soft
tissue and proprietary glass cleaning solution. Regular cleaning of
the panel is advised to maintain optimum conversion of the sun’s
energy into direct current.
Trouble Shooting
If you have any problems please contact Smart Solar before
returning to the place of purchase. For immediate answers visit
our website www.smartsolar.com where you will find an
extensive trouble shooting section with frequently asked questions
and instant email enquiry forms.
Pump does not operate even though the solar panel is in full
sunlight
1) Check the connection of the pump to the solar panel. If loose
then re-connect, rotating the connectors until good contact is
made. If any of the cabling is damaged then seek a replacement.
2) Check whether the impeller is blocked by removing the pump
cover. If it is, then clean the pump as detailed above.
Pump does operate but there is no water running through the
hose
1) Check for the build up of sediment, scale or dirt in the filter and
in the bottom of the pump housing as detailed above.
2) Check whether the pump cover is attached properly. If the
pump cover is not pushed down tightly, the pump will not push
water through the fountain.
Solar panel & Stand Kit
Fixing The Panel Holder
Stand Mounted Solar Panel
Standing Solar Panel
Wall Mounted Solar Panel