Smart Solar Solar Duo Cascade User manual

Solar Cascade
Solar Duo Cascade
Solar Fish
Solar powered water fountains
operate in direct sunlight
SOLAR CASCADE
SOLAR DUO CASCADE
SOLAR FISH

Contents
1. Introduction
2. Security instructions
3. Overview
4. Components
5. Assembling & using your product
These instructions relate ONLY to the Smart Solar fountain
products and contain important information for using the
product for the first time. Please keep these instructions
for later reference. They should accompany the product in
the event of transfer to a new user.
1. IntroduCtIon
Thank you for purchasing one of our Smart Solar fountains.
You have purchased a product that complies with the latest and
most up-to-date solar technology available. To preserve these
standards and in order to maintain safety you should adhere to
the instructions for use detailed in this manual.
2. seCurIty InstruCtIons
In the event of any problems arising or damage occurring as
a result of misuse the manufacturers warranty will be deemed
cancelled. The manufacturer is not responsible for any claims
or damages arising from the misuse of this product. For
safety reasons and in order to maintain standards (CE) you are
prohibited from altering or changing any component in the solar
fountain.
Please follow the instructions very carefully. For commercial
applications due care and attention must be paid to the Health
and Safety Standards in your jurisdiction.
3. overvIew
Smart Solar fountains have been designed for outdoor use. A
solar module powers the pump. The pump drives water to the
topmost jug and then cascades down through the lower tiered
bowls. In order for the pump to operate, the solar module needs
to be placed in direct sunlight. The performance of the pump
depends on the season and the position of the solar module.
Solar Panel & Stand Kit
Attaching the Panel Holder
Wall Mounted Solar Panel
Stand Mounted Solar Panel
Standing Solar Panel
6. Cleaning and maintenance
7. Functionality problems
8. Technical data
9. Spare parts
10. 1 year warranty

Instruction Manual (English)


Instruction Manual (English)
SOLAR CASCADE

Instruction Manual (English)
5. AssemblIng And
usIng your produCt
SOLAR CASCADE

First assemble the metal stand. There are connection points
as per the diagram on the right. Insert the big bowl first.
Make sure that this is properly followed.
Next insert the three small bowls.
Unroll the pump cable.
Draw the hose through the topmost ring and insert the
self-sealing soft rubber plug into the hole in the jug. Then
place the jug on the topmost ring ensuring correct alignment.
Affix the hose along the metal frame using the provided
plastic straps.
Fill the main bowl with water.
Insert the connector into the rear of the module.
Your fountain is now ready to operate.
Please Note:
The jug and the bowls are made of clay and are fragile.
Decide on a suitable location.
There will be water splashes when the product is in use.
Make sure that the surface on which you are placing the
fountain will not be affected.
We recommend you use filtered, distilled or rain water
to prevent scale building up.
On first use, there may be air in the pump.
It can take up to 5 minutes until the air escapes.
pAnel performAnCe
mIn. mIn.
mAX.
CondItIon funCtIonAlIty
optImum low
Solar panel connector
seAsonAl funCtIonAlIty
low medIum
good medIum
wInter sprIng
Autumnsummer
1 Solar panel
2 Pump with
plastic tube and
plastic straps
3 Jug
4 Small bowls (3 pcs)
5 Main bowl
6
Solar panel
holder set
7
Metal frame
(4 pcs)
1
3
4
5
2
6
Stand connects at indicated points



of the jug
SOLAR DUO CASCADE
Attach hose where indicated
4. Components
1 Solar panel
2 Pump with
plastic tube
3 Jug
4 Small bowls
(6 pcs)
5 Main bowl
6
Solar panel
holder set
7
Metal stand
SOLAR FISH
12
3
4
5
6
7
1 Solar panel
2 Pump
3 Fish
4 Main bowl
5
Solar panel
holder set
6
Metal stand
1
2
3
4
5
6
SOLAR CASCADE


Instruction Manual (English)

Instruction Manual (English)


First assemble the metal stand. There are connection points
as per the diagram on the right. Insert the big bowl first.
Make sure that this is properly followed.
Next insert the six small bowls.
Unroll the pump cable.
Draw the hose through the topmost ring and insert the
self-sealing soft rubber plug into the hole in the jug. Then
place the jug on the topmost ring ensuring correct alignment.
Affix the hose along the metal frame using the provided
plastic straps.
Fill the main bowl with water.
Insert the connector into the rear of the module.
Your fountain is now ready to operate.
Please Note:
The jug and the bowls are made of clay and are fragile.
Decide on a suitable location.
There will be water splashes when the product is in use.
Make sure that the surface on which you are placing the
fountain will not be affected.
We recommend you use filtered, distilled or rain water
to prevent scale building up.
On first use, there may be air in the pump.
It can take up to 5 minutes until the air escapes.


First assemble the metal stand. Then insert the main bowl.
Make sure that it is correctly aligned.
Insert the self-sealing soft rubber plug with the pump attached
into the hole of the fish. Then place the fish on the upper ring
ensuring correct alignment.
Unroll the pump cable.
Fill the main bowl with water.
Insert the connector into the rear of the module.
Your fountain is now ready to operate.
Please Note:
The fish and the main bowl are made of clay and are fragile.
Decide on a suitable location.
There will be water splashes when the product is in use.
Make sure that the surface on which you are placing the
fountain will not be affected.
We recommend you use filtered, distilled or rain water
to prevent scale building up.
On first use, there may be air in the pump.
It can take up to 5 minutes until the air escapes.
Stand connects at indicated points
Draw the hose through


SOLAR DUO CASCADE SOLAR FISH
6. CleAnIng And mAIntenAnCe
If after time the pump starts to lose power or stops working you
should check for the build up of sediment or scale in the bottom
of the pump housing. Carefully remove the pump from the hose.
Open the pump housing at its base. Remove the impeller. Remove
any dirt or scale, which has built up and close the case back up.
Carefully reattach the pump to the hose.
The Solar module should only be cleaned with soft tissue and any
mild glass cleaning solution.
Draw the hose through the





Position urn onto upper stand
Attach hose to pump
Stand connects at indicated point


Instruction Manual (English)
7. troublesHootIng
Pump does not operate even though the solar module
is in full sunlight.
1) No connection to the solar module - Check the connection to
the solar module.
2) Impeller is blocked - Clean the pump.

through the hose.
Check for the build up of sediment or scale in the hose or the
filter. Clean the hose and filter.
• Make sure pump is completely submerged in water.
Disconnect pump from panel, wait 3 seconds and re-connect.
8. teCHnICAl dAtA
Operation voltage: 6.0 V
Solar module: 7.5 V / 1.5 W
Pump performance: max. 75 gph
Cable: 32 ft.
 In winter, Smart Solar fountains must be stored in
a dry and frost-proof environment. The pump must never be
operated dry (out of water). Dry operation permanently damages
the pump.
9. spAre pArts
Solar panel: Item No. SCK1W5S
 Item No. SPK160X3S
For ceramic parts, please call for availability.
10. lImIted 1 yeAr wArrAnty
If at any time within 12 months from the date of purchase this
product fails due to a defect in materials or workmanship, Smart
Solar will replace or repair it free of charge. Does not include
batteries. Please be sure to register your product within 7 days
of purchase at www.smartsolar.com.
The warranty does not apply to:
Damage caused by accidents, abuse, poor handling, frost or
normal wear and tear. Products which have been subject to
unauthorized repair or modification.
For further information please contact your nearest service center
detailed on the last page of this instruction manual.

Clear impeller

For further information, including parts, warranty repair
or general inquiries, please contact Smart Solar at:
USA Corporate Office
Tel:
1-813-343-5775
Website:
www.smartsolar.com
For further information, including parts, warranty repair
or general inquiries, please contact Smart Solar at:
USA Corporate Office
Tel:
1-813-343-5775
Website:
www.smartsolar.com