Smart Solar Pond Island User manual

pond island
floating solar powered fountain
operates in direct sunlight
smart
SOLAR

POND ISLAND FOUNTAIN Instruction Manual
ENGLISH
CONTENTS
1. Introduction
2. Security instructions
3. Overview
4. Components
5. Assembling and using your product
6. Cleaning and maintenance
7. Functionality problems
8. Technical data
9. Spare parts
10. Full 2 year warranty
These instructions relate ONLY to the Pond Island Solar
Fountain and contain important information for using the
product for the first time. Please keep these instructions for
later reference. They should always accompany the product
in the event of transfer to a new user.
1. INTRODUCTION
Thank you for purchasing the Pond Island Solar Fountain. You have
purchased a product that complies with the latest and most up-to-
date solar technology available.
This product complies with the European and National Standards.
The relevant certificates of conformity are held by STI Group.
To preserve these standards and in order to maintain safety you
should adhere to the instructions for use detailed in this manual.
2. SECURITY INSTRUCTIONS
In the event of any problems arising or damage occurring as a
result of misuse the manufacturers warranty will be deemed
cancelled. The manufacturer is not responsible for any claims or
damages arising from the misuse of this product. For safety reasons
and in order to maintain standards (CE) you are prohibited from
altering or changing any component in the
Pond Island Solar Fountain.
Please follow the instructions very carefully.
For commercial applications due care and attention must be paid to
the Health and Safety Standards in your jurisdiction.

POND ISLAND FOUNTAIN Instruction Manual
ENGLISH
POND ISLAND FOUNTAIN Instruction Manual
ENGLISH
3. O ER IEW
The Pond Island Solar Fountain has been designed for outdoor use.
A solar module powers the pump. In order for the pump to
operate, the solar module needs to be placed in direct sunlight. The
performance of the pump depends on the season and the position
of the sun to the solar module.
4. COMPONENTS
5. ASSEMBLING AND
USING YOUR PRODUCT
Unpack all components carefully.
Insert the Pond Island Solar Fountain into your pond.
Please note: On first use, there may be air in the pump. It can take
up to 5 minutes until the air escapes. You can submerge the Pond
Island Solar Fountain below the water surface to help the air
escape.
Choose your favorite fountain head and insert it into the Pond
Island Solar Fountain.
6. CLEANING AND MAINTENANCE
If after time the pump starts to lose power or stops working you
should check for the build up of sediment or scale in the bottom of
the pump housing or in the filter.
Remove the filter at the bottom and clean it. Open the pump
housing at its base. Remove the impeller. Remove any dirt or scale,
which has built up and close the case back up.
The Solar module should only be cleaned with soft tissue and
proprietary glass cleaning solution.
7. FUNCTIONALITY PROBLEMS
Pump does not operate even though the solar module
is in full sunlight.
Impeller is blocked or filter/pump housing is dirty -
Clean the pump.
Pump does operate but there is no water running
through the fountain head.
Check for the build up of sediment or scale in the tubes
or the filter - Clean the tubes and the filter.
PANEL PERFORMANCE
MIN. MIN.
MAX.
CONDITION FUNCTIONALITY
SEASONAL FUNCTIONALITY
OPTIMUM LOW
LOW MEDIUM
GOOD MEDIUM
WINTER SPRING
AUTUMNSUMMER
1Floating body with solar
modules, pump and filter 2Fountain head set
1
2
Fountain head set
Floating body with fountain head inserted

POND ISLAND FOUNTAIN Instruction Manual
ENGLISH
8. TECHNICAL DATA
Operation voltage: 6.0 V
Solar module: 7.5V / 1.2 W
Pump performance: max. 210 l/h
Fountain height: 45 cm
Important: In winter the Solar Pond Island must be stored in
a dry and frost-proof environment. The pump must never be
operated dry (out of water) Dry operation permanently damages
the pump.
9. SPARE PARTS
Fountain head set: Item No. 1500-01
10. FULL 2 YEAR WARRANTY
If within 24 months from the date of purchase this product fails
due to a defect in material or workmanship. Smart Solar will
replace or repair it free of charge.
The warranty does not apply to:
Damage caused by accidents, abuse, poor handling, frost or normal
wear and tear. Products which have been subject to unauthorized
repair or modification.
For further information please contact your nearest service centre
detailed on the last page of this instruction manual.
Remove filter from pump body
Remove pump base
Clear impeller

for further information,pleasecontact STI Group
STI Group customer service:
For a look at all our products, please visit:
www.stigroupinc.com
To register your product, please go to:
www.stigroupinc.com/registration
USA
Tel:[phone]
E-mail:[email protected]
Website :www.stigroupinc.com
smart
SOLAR
© 2004 STI Group