SMART ROBOT CUBBY User manual

Instruction Manual
ROBOT CUBBY

INTRODUCTION
FUNCTIONS
GET TO KNOW YOUR ROBOT
Thank you for purchasing ROBOT CUBBY!
Please read and follow all instructions carefully before using this robot, and
keep this instruction manual as a reference.
①Facial expression ④Special effect animation ⑦Senior programming
②Smart speech ⑤Auto demonstration ⑧Children’s songs in English
③Bluetooth ⑥App control ⑨Sound effect of facial expression
①LED light
②Wheel
③3-position power
switch(OFF/ON/
Bluetooth speaker)
④USB charging port
⑤Restart
2
34 5
6
7 8
9
1
10
⑥Loudspeaker
⑦Facial expression
⑧Music
⑨Demonstration
⑩Resetting
-1-

Button Instruction
Startup Setting
FUNCTION SETTING
1. Slide the power switch to ON – turn it on to the startup state.
The robot plays the startup sound effect + LED light of the eyes is on.
2. Slide the power switch to Bluetooth speaker and enter the Bluetooth speaker mode.
It is static without actions. This mode is used for music playing and mobile phone
connection.
3. Slide the power switch to OFF – turn it off. It is directly powered off and starts a
shutdown state.
Button Instruction
Under shutdown, press “resetting” to pause the current contents
under playing and enter the shutdown state again.
Under shutdown, press “music”. It plays one piece of music
+ changes of eye light + motor working. It will play one piece
of music for each press, for 7 pieces in total.
Under startup, press “demonstration”. It plays demonstration
contents + changes of eye light + motor working. It will
play one piece of demonstration contents for each press, for 3
pieces in total.
1. You will hear “Hello, who are you” and see a facial expression
after triggering the button for the first time (it is invalid to press
it again after first-time triggering. It will be triggered after
pressing of any other button and then the “demonstration”
button)
2. After second-time triggering of it, it will play an action sound
effect + facial expression in sequence.
3. After third-time triggering of the button, it will play a piece of music.
Under shutdown, press “facial expression”. It plays a sound
effect + changes of eye light. It will play one piece of music
for each press, for 7 pieces in total.
1. Laughter 5. Snoring
2. Happiness 6. Robot sound effect 1
3. Crying 7. Robot sound effect 2
4. Dizziness
Resetting
Music
Demonstration
Facial
expression
-2-

SMART SPEECH
Tips:
Speech recognition is only valid under startup. It is invalid under Bluetooth speaker
mode and shutdown state.
Say “Go ahead/Go forward” to the robot
Robot – execute “go ahead”
Say “Go backward” to the robot
Robot – execute “go backward”
Say “Turn left” to the robot
Robot – execute “turn left”
Say “Turn right” to the robot
Robot – execute “turn right”
Say “Look to the left” to the robot
Robot – execute “look to the left” of head
Say “Look to the right” to the robot
Robot – execute “look to the right” of head
Say “Music” to the robot
Robot – play a piece of music + an action
Say “Smile” to the robot
Robot – play a laughter + eye light gives a smile
Say “Change face” to the robot
Robot – play a sound effect of happiness + eye light gives
a happy facial expression
Say “Show it” to the robot
Robot – execute demonstration contents
Say a voice command to make the robot execute an action.
-3-

Interface of Remote Control
APP INTERFACE
SCAN TO DOWNLOAD APP
To install TIA APP, please use a mobile device to scan the following QR code for
downloading. (http://fir.icloudrover.com/nb15 as an alternative downloading link)
TIA Android APP App Store
Interface of Remote Control
Bluetooth
Interface of Bluetooth connection
Interface of Bluetooth connection
1. Bluetooth:
enter the Bluetooth interface
2. Enter:
enter the mode homepage
Click to connect Bluetooth
-4-

Interface of Mode Homepage
1. Drive
2. Programming
Interface of Drive Mode
3 4 5
12
6
9
78
10 11
12
Music
Sound effect
Look to the left Look to the right
Display Sound
adjustment key
Bluetooth
Selector of
pre-programmed
facial expression
Selector of
customized
facial expression
Homepage Back
Direction joystick
Facial
expression
edit
1. Direction joystick (control the robot to go ahead, go backward, turn left and
turn right)
2. Facial expression edit (click to enter the interface of facial expression edit)
3. Bluetooth (on/off)
4. Homepage (back to mode homepage interface)
5. Back (back to mode homepage interface)
6. Selector of pre-programmed facial expression (switch pre-loaded facial
expressions of robot)
7. Selector of customized facial expression (switch customized edited facial
expressions)
8. Music (play pre-loaded music of robot)
9. Sound effect (play pre-loaded sound effects of robot)
10. Display (control on/off of light)
11. Sound adjustment key (control the volume of the robot)
12. Look to the left/right (make the robot look to the left/right)
-5-

Interface of Facial Expression Edit
1. Bluetooth (on/off)
2. Homepage (back to mode homepage interface)
3. Back (back to drive mode interface)
4. Page slider (add page click points, up to 10 pages)
5. Edit column of facial expressions (edit or delete all facial expressions,
pre-programmed robot facial expressions not displayed)
6. Add (add a new facial expression, newly-added according to original
facial expressions)
7. Column of facial expressions (drag to select any facial expression,
first three as pre-programmed facial expressions)
8. Cancel (delete the selected facial expression)
9. Delete (empty the facial expression edit column)
10. Animation (switch facial expression display effects)
11. Upload (transfer facial expression to robot)
1 2 3
4
5
679
10
11
8
-6-

Interface of Programming
Interface of Programming
Action (click right edit column for programming)
Sound (click right edit column for programming)
Facial expression (click right edit column for programming)
Bluetooth (on/off)
Homepage (back to mode homepage interface)
Back (back to mode homepage interface)
Stop (after editing, click “stop” to add stop symbol after programming,
the STOP symbol must be added before the command can be executed)
Play (play current programmed contents)
Pause (pause playing)
Cycle (cycled playing)
Save (save current programmed contents, 3 sequences to be saved)
Delete (delete the selected programming object)
-7-

Special Effect Animation
Light on if selected
Light off if not selected
Rolling:
Leftward cycled screen shift, delete the original picture to display the first
picture immediately. Used for multi-page long sentence display.
Continuous rolling:
Leftward cycled screen shift. The first picture is not displayed immediately.
To delete the original picture by rolling. Used for some facial expression rolling
shift and display of long sentences.
Quick picture shift:
Quick shift of a whole page. Stop at the last page. Used for regular and quick
actions, such as “startup animation”. It fails to see the single page clearly and
realizes whole-page quick shift.
Slow picture shift:
Slow cycled shift of a whole page. Used for shift of some facial expressions,
with single pages seen clearly.
Note: Only one animation effect is selected each time. Multi-selection is not available.
-8-

Single-picture left-in:
Shift the screen from left to right. Move in a new picture slowly from left.
Pause for completion of each picture.
Single-picture right-in:
Shift the screen from right to left. Move in a new picture slowly from right.
Pause for completion of each picture.
Continuous left-in:
Coverage and shift from left to right. The former picture is gradually replaced
by the new one from left, similar to page turning from the left.
Continuous right-in:
Coverage and shift from right to left. The former picture is gradually replaced
by the new one from right, similar to page turning from the right.
Horizontal diffusion:
Coverage and shift from the middle to two sides. The former picture is gradually
replaced by the new one from left, similar to page turning from the middle.
Horizontal gathering:
Coverage and shift from two sides to the middle. The former picture is gradually
replaced by the new one from right, similar to book closing.
Downward shift-in:
Downward coverage and shift. The former picture is gradually replaced by the
new one from the top, similar to falling.
Upward shift-in:
Upward coverage and shift. The former picture is gradually replaced by the
new one from the bottom, similar to rising.
Vertical diffusion:
Coverage and shift from the middle to the top and bottom. The former picture
is gradually replaced by the new one from left, similar to horizontal page turning
from the middle.
Vertical gathering:
Coverage and shift from the top and bottom to the middle. The former picture
is gradually replaced by the new one from right, similar to horizontal book closing.
Shutters:
Coverage and shift from multiple positions. The former picture is gradually
replaced by the new one from multiple directions, similar to grid switching.
-9-

ROBOT CHARGING
USB
Insert one end of the USB cable into the robot charging port, with the other end
connected to the USB power port for charging (eg. laptop, mobile power supply,
USB outlet, power adapter). Built-in battery capacity of 600mA for the robot, with
120min charging.
TROUBLESHOOTING GUIDE
No.
1
2
3
4
5
Constant flicker of eye light
No reaction
Bluetooth not finding
Low battery
Low battery
Powered off
Powered on
Out of range
Charge the robot
Charge the robot
Slide the power switch to
Bluetooth Speaker position
Slide the power switch to
Bluetooth Speaker position
Close to the robot and re-pair
Problems Causes Solutions
-10-

ＮＯＴＥ： Ｔｈｉｓ ｅｑｕｉｐｍｅｎｔ ｈａｓ ｂｅｅｎ ｔｅｓｔｅｄ ａｎｄ ｆｏｕｎｄ ｔｏ ｃｏｍｐｌｙ ｗｉｔｈ
ｔｈｅ ｌｉｍｉｔｓ ｆｏｒ ａ Ｃｌａｓｓ Ｂ ｄｉｇｉｔａｌ ｄｅｖｉｃｅ， ｐｕｒｓｕａｎｔ ｔｏ ｐａｒｔ １５
ｏｆ ｔｈｅ ＦＣＣ Ｒｕｌｅｓ． Ｔｈｅｓｅ ｌｉｍｉｔｓ ａｒｅ ｄｅｓｉｇｎｅｄ ｔｏ ｐｒｏｖｉｄｅ ｒｅａｓｏｎａｂｌｅ
ｐｒｏｔｅｃｔｉｏｎ ａｇａｉｎｓｔ ｈａｒｍｆｕｌ ｉｎｔｅｒｆｅｒｅｎｃｅ ｉｎ ａ ｒｅｓｉｄｅｎｔｉａｌ
ｉｎｓｔａｌｌａｔｉｏｎ． Ｔｈｉｓ ｅｑｕｉｐｍｅｎｔ ｇｅｎｅｒａｔｅｓ ｕｓｅｓ ａｎｄ ｃａｎ ｒａｄｉａｔｅ
ｒａｄｉｏ ｆｒｅｑｕｅｎｃｙ ｅｎｅｒｇｙ ａｎｄ， ｉｆ ｎｏｔ ｉｎｓｔａｌｌｅｄ ａｎｄ ｕｓｅｄ ｉｎ
ａｃｃｏｒｄａｎｃｅ ｗｉｔｈ ｔｈｅ ｉｎｓｔｒｕｃｔｉｏｎｓ，ｍａｙ ｃａｕｓｅ ｈａｒｍｆｕｌ ｉｎｔｅｒｆｅｒｅｎｃｅ
ｔｏ ｒａｄｉｏ ｃｏｍｍｕｎｉｃａｔｉｏｎｓ． Ｈｏｗｅｖｅｒ， ｔｈｅｒｅ ｉｓ ｎｏ ｇｕａｒａｎｔｅｅ ｔｈａｔ
ｉｎｔｅｒｆｅｒｅｎｃｅ ｗｉｌｌ ｎｏｔ ｏｃｃｕｒ ｉｎ ａ ｐａｒｔｉｃｕｌａｒ ｉｎｓｔａｌｌａｔｉｏｎ．
Ｉｆ ｔｈｉｓ ｅｑｕｉｐｍｅｎｔ ｄｏｅｓ ｃａｕｓｅ ｈａｒｍｆｕｌ ｉｎｔｅｒｆｅｒｅｎｃｅ ｔｏ ｒａｄｉｏ
ｏｒ ｔｅｌｅｖｉｓｉｏｎ ｒｅｃｅｐｔｉｏｎ， ｗｈｉｃｈ ｃａｎ ｂｅ ｄｅｔｅｒｍｉｎｅｄ ｂｙ ｔｕｒｎｉｎｇ
ｔｈｅ ｅｑｕｉｐｍｅｎｔ ｏｆｆ ａｎｄ ｏｎ， ｔｈｅ ｕｓｅｒ ｉｓ ｅｎｃｏｕｒａｇｅｄ ｔｏ ｔｒｙ ｔｏ
ｃｏｒｒｅｃｔ ｔｈｅ ｉｎｔｅｒｆｅｒｅｎｃｅ ｂｙ ｏｎｅ ｏｒ ｍｏｒｅ ｏｆ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｍｅａｓｕｒｅｓ：
－ Ｒｅｏｒｉｅｎｔ ｏｒ ｒｅｌｏｃａｔｅ ｔｈｅ ｒｅｃｅｉｖｉｎｇ ａｎｔｅｎｎａ．
－ Ｉｎｃｒｅａｓｅ ｔｈｅ ｓｅｐａｒａｔｉｏｎ ｂｅｔｗｅｅｎ ｔｈｅ ｅｑｕｉｐｍｅｎｔ ａｎｄ ｒｅｃｅｉｖｅｒ．
－Ｃｏｎｎｅｃｔ ｔｈｅ ｅｑｕｉｐｍｅｎｔ ｉｎｔｏ ａｎ ｏｕｔｌｅｔ ｏｎ ａ ｃｉｒｃｕｉｔ ｄｉｆｆｅｒｅｎｔ
ｆｒｏｍ ｔｈａｔ ｔｏ ｗｈｉｃｈ ｔｈｅ ｒｅｃｅｉｖｅｒ ｉｓ ｃｏｎｎｅｃｔｅｄ．
－Ｃｏｎｓｕｌｔ ｔｈｅ ｄｅａｌｅｒ ｏｒ ａｎ ｅｘｐｅｒｉｅｎｃｅｄ ｒａｄｉｏ／ＴＶ ｔｅｃｈｎｉｃｉａｎ ｆｏｒ ｈｅｌｐ
Ｃｈａｎｇｅｓ ｏｒ ｍｏｄｉｆｉｃａｔｉｏｎｓ ｎｏｔ ｅｘｐｒｅｓｓｌｙ ａｐｐｒｏｖｅｄ ｂｙ ｔｈｅ ｐａｒｔｙ
ｒｅｓｐｏｎｓｉｂｌｅ ｆｏｒ ｃｏｍｐｌｉａｎｃｅ ｃｏｕｌｄ ｖｏｉｄ ｔｈｅ ｕｓｅｒ＇ｓ ａｕｔｈｏｒｉｔｙ
ｔｏ ｏｐｅｒａｔｅ ｔｈｅ ｅｑｕｉｐｍｅｎｔ．
Ｔｈｉｓ ｄｅｖｉｃｅ ｃｏｍｐｌｉｅｓ ｗｉｔｈ Ｐａｒｔ １５ ｏｆ ｔｈｅ ＦＣＣ Ｒｕｌｅｓ．
Ｏｐｅｒａｔｉｏｎ ｉｓ ｓｕｂｊｅｃｔ ｔｏ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｔｗｏ ｃｏｎｄｉｔｉｏｎｓ：
（１） ｔｈｉｓ ｄｅｖｉｃｅ ｍａｙ ｎｏｔ ｃａｕｓｅ ｈａｒｍｆｕｌ ｉｎｔｅｒｆｅｒｅｎｃｅ， ａｎｄ
（２） ｔｈｉｓ ｄｅｖｉｃｅ ｍｕｓｔ ａｃｃｅｐｔ ａｎｙ ｉｎｔｅｒｆｅｒｅｎｃｅ ｒｅｃｅｉｖｅｄ，
ｉｎｃｌｕｄｉｎｇ ｉｎｔｅｒｆｅｒｅｎｃｅ ｔｈａｔ ｍａｙ ｃａｕｓｅ
ｕｎｄｅｓｉｒｅｄ ｏｐｅｒａｔｉｏｎ．