Smarte 4K-800 User manual

Notice
The information contained in this document is subject to change
without notice. Smart-e makes no warranty of any kind with regard to
this material, including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
Smart-e will not be liable for errors contained inside this manual, or
for incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced, or
translated into another language without prior written consent from
Smart-e (UK) Ltd.
Edition 1, January 2015
Copyright 2015 Smart-e (UK) Ltd.

Operating Instructions
HDMI Extender
Operating Instructions
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
FEATURES
Incorporates HD Base-T technology
Full HD support: 1080p@60Hz@48 b/pixels, 4Kx2K and support 3D
Extends 1080p Full HD and 3D TV up to 228 feet (70 meters) using one CAT5e (or
better) cable
Allows IR remote control of source devices
Supports high bit-rate audio formats (Dolby True-HD / DTS Master Audio)
DC 5V power supply
CEC Pass-Through
With mounting ears
1
Operating Instructions
TABLE OF CONTENTS
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Maintenance
Product Service
Warranty
SPECIFICATIONS
Operating Temperature
Range
-5 to +35℃(+23 to +95℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Video Signal
0.5-1.0 Volts P-P
Input DDC Signal
5 volts p-p(TTL)
Support Video Format
DTV/HDTV:480i/576i/480P/576P/720P/1080i/
1080P/4Kx2K
3D video
Video Output
HDMI +HDCP
Support Audio Format
DTS-HD Master Audio、Dolby true-HD etc.
Transmission Distance
1080P 228FT/70m(Maximum) over single CAT5E/6
Solid
Power consumption
5watts(Maximum)
Dimension (L×W×H)
87x70x24mm
Net Weight
260g(Pair)
Note1: Specifications are subject to change without notice. Mass and dimensions are
approximate.
PACKING CONTENTS
1) Main Unit. Transmitter & Receiver HDMI Extender
2) Power adapter DC 5V x2PCS
3) IR-TX cable
4) Operating Instructions

3
Operating Instructions
PANEL DESCRIPTIONS
Transmitter Panel
①IR-TX port
②HDMI input
③Cat5e/6 output port
④Status of HDCP
⑤Status of signal connection
⑥Status of Mode
⑦Indicator of power input
⑧Power input port
4
Operating Instructions
Receiver Panel
①IR-RX
②HDMI output port
③Cat5e/6 input port
④Status of HDCP
⑤Status of signal connection
⑥Status of Mode
⑦Indicator of power input
⑧Power input port

5
Operating Instructions
POWER: indicates that power is available to the unit.
MODE : when blinking indicates the device is active (fw running).
LINK : when ON indicates that an HD Base-TTM link connection has been established
between the two boards over the CAT5e cable.
HDCP : when ON, indicates that video content with HDCP protection is being transferred.
When BLINKING, indicates video content without HDCP. When OFF,indicates that no video
is being transferred.
CONNECTING AND OPERATING
1) Connect the HDMI signal sources (Such as DVD, STB etc) to HDMI Transmitter.
2) Connect CAT5e or 6 cables to both the Cat5e/6 of the transmitter and Cat5e/6 port
of the Receiver. (The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
4) Connect the power supply into Power port.
5) Connect IR-TX cable into IR-TX port .
Attention: Insert/Extract cables gently.
TYPICAL APPLICATION
-12-
Limited Warranty Statement
A. Extent of limited warranty
1. Smart-e (UK) Ltd warrants to the end-user customers that Smart-e product specified above will be free from defects in
materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer.
Customer is responsible for maintaining proof of date of purchase.
2. Smart-e warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any:
a. Improper or inadequate maintenance or modifications
b. Operations outside product specifications
c. Mechanical abuse, and exposure to severe conditions
3. If Smart-e receives during applicable warranty period notice of defect, Smart-e will at its discretion replace or repair defective
product .If Smart-e is unable to replace or repair defective product covered by the Smart-e warranty within reasonable period
of time, Smart-e shall refund the cost of the product.
4. Smart-e shall have no obligation to repair, replace, or refund unit until customer returns defective product to Smart-e.
5. Any replacement product could be new or like new, provided that it has functionality at least equal to that of the product being
replaced.
6. Smart-e warranty is valid in any country where the covered product is distributed by Smart-e.
B. Limitations of warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER SMART-E NOT ITS THIRD PARTY SUPPLIERS MAKE ANY OTHER WARRANTY
OR CONDITION OF ANY KIND WHETHER EXPRESSED OR IMPLIED, WITH RESPECT TO THE SMART-E PRODUCT, AND SPECIFICALLY
DISCLAIM IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A
PARTICULAR PURPOSE.
C. Limitations of liability
To the extent allowed by local law the remedies provided in this warranty statement are the customers sole and exclusive remedies
TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THIS WARRANTY
STATEMENT, IN NO EVENT WILL SMART-E OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
D. Local law
To the extent that this warranty statement is inconsistent with local law, this warranty statement shall be considered modified to be
consistent with such law.