SMC Networks IBG1 Series User manual
Doc. No IBG****-OMY0020
PRODUCT NAME
IMPACT BLOW GUN
MODEL / Series / Product Number
IBG1 SERIES
Contents
1. Table of contents ・・・P1
2. How to order ・・・P2
3. Specifications ・・・P2
4. External dimensions drawing ・・・P3,4
5. How to mount a nozzle ・・・P5,6
6. Safety Instructions ・・・P7－10
-1-
Adjuster
Symbol Type
0Without adjuster
1With adjuster
Supply port Nozzle (Refer to page 4 for details.)
Symbol Type
Nozzle length
Nozzle part no.*2
Nil Without nozzle — —
01
Long nozzle*1
50 mm IBG1-12-10-50
02 100 mm IBG1-12-10-100
03 150 mm IBG1-12-10-150
04 300 mm IBG1-12-10-300
11
Long nozzle with a
silencer*1, *3
50 mm IBG1-12-10-50S
12 100 mm IBG1-12-10-100S
13 150 mm IBG1-12-10-150S
14 300 mm IBG1-12-10-300S
*1 A long nozzle and a silencer are included in a package but do
not come mounted. Refer to page 4 for assembly procedures.
*2 This is the part number for the long nozzle and fitting set.
*3 The silencer and long nozzle can be used together. Part number
IBG1 0
Model IBG10
(Without adjuster)
IBG11
(With adjuster)
Fluid Air
Max. operating pressure 0.7 MPa
Proof pressure 1.05 MPa
Fluid and ambient temperature range
+5 to +60°C
Operational force 10 N or less
Weight 380 g 400 g
Screw-in type
Symbol Size
Nil Rc3/8
NNPT3/8
FG3/8
With S coupler/One-touch fitting
Symbol Applicable
tubing O.D. Part no.
S coupler
11 — KK4P-03MS
One-touch fitting
H06 ø6 KQ2H06-03AS
H08 ø8 KQ2H08-03AS
H10 ø10 KQ2H10-03AS
H07 ø1/4" KQ2H07-36AS
H09 ø5/16" KQ2H09-36AS
H11 ø3/8" KQ2H11-36AS
*The S coupler or fitting is shipped together with the product.
02
for ordering a silencer alone is IBG1-12S.
2. How to Order
3.Specifications
-2-
With S coupler plug
mounted
(KK4P-03MS)
With One-touch fitting
mounted
(KQ2H-AS)
Valve position adjuster
Scale setting range:
0 (Fully closed) to 4 (Fully open)
29
41
14
8.5
37.6
30
11
183.8
138.3
108.3
164.3 14.5
25.5 32
83
55
84.6
B
B
20.5
35
41
29
14
8.5
138.3
37.6
30
11
138.3
183.8
108.3
164.3 14.5
84.6
55
3225.5
Locked: ≈100.3
Unlocked: ≈101.7
20.5
35
Rc3/8, NPT3/8, G3/8
Supply port
Rc3/8, NPT3/8, G3/8
Supply port
Long nozzle Long nozzle
with a silencer
A A
Rc1/4
Discharge port
Rc1/4
Discharge port
IBG10/Without adjuster
IBG11/With adjuster
Symbol Type Nozzle
length Nozzle part no. A
[mm]
Weight
[g]
01
Long nozzle
50 mm IBG1-12-10-50 57 35
02 100 mm IBG1-12-10-100 107 40
03 150 mm IBG1-12-10-150 157 45
04 300 mm IBG1-12-10-300 307 59
11
Long nozzle
with a silencer
50 mm IBG1-12-10-50S 72 57
12 100 mm IBG1-12-10-100S 122 62
13 150 mm IBG1-12-10-150S 172 67
14 300 mm IBG1-12-10-300S 322 81
Symbol Type Applicable
tubing O.D. Part no. B
[mm]
11 S coupler — KK4P-03MS 35.7
H06 Metric size
One-touch
fitting
ø6 KQ2H06-03AS 13
H08 ø8 KQ2H08-03AS 13
H10 ø10 KQ2H10-03AS 18.4
H07 Inch size
One-touch
fitting
ø1/4" KQ2H07-36AS 13.4
H09 ø5/16" KQ2H09-36AS 13.4
H11 ø3/8" KQ2H11-36AS 18
4.External dimensions
IBG10_11/With nozzle
IBG10_11/With fitting
-3-
R1/4
L
≈L+ 7 ∗Reference dimension after R thread installation
ø10
ø12
Width across flats 19 Width across flats 17
Width across
flats 17
≈L+ 22 ∗Reference dimension after R thread installation
L
Width across flats 19
7
Width across flats 19
Width across flats 17
R1/4
Fitting bodyFerrule
Union nut
Polycarbonate (Transparent)
ø26
øD
11
2
øD
Rubber bushing
(Material: CR)
Long nozzle(Option)
[mm]
Part no. Nozzle I.D.
Connection thread
L
IBG1-12-10-50
ø10 R1/4
50
IBG1-12-10-100 100
IBG1-12-10-150 150
IBG1-12-10-300 300
[mm]
Part no. L
IBG1-12-10-50S 50
IBG1-12-10-100S 100
IBG1-12-10-150S 150
IBG1-12-10-300S 300
Long nozzle with a silencer
(Option)
Chip guard
(Please order separately.)
[mm]
Part no. øD
IBG1-12C 100
*The rubber bushing is shipped together with the product.
*It is possible to use the guard with a silencer, but in that
case, mount the guard before mounting the silencer.
4.External dimensions
-4-
1. Check that the ferrule is mounted inside the
fitting as shown in figure on the right.
Hand-tighten the union nut. Ensure ferrule is
aligned properly.
Preparation
2. Insert the nozzle until it touches the fitting
body. Then, mark a line on the nozzle at the
edge of the union nut.
3. Remove the nozzle once, and check the
dimension from the end of the nozzle to the
marking. If the dimension is different from
the 17mm, verify the alignment of the nozzle
and adjust.
Tightening
4. After verifying the dimension, insert the
nozzle into the fitting body again.
Confirm that the nozzle is inserted down to
the marking.
5. Using the tightening tool, tighten the union
nut so that the gap between the fitting body
and the union nut becomes 2mm or less.
6. Pull the nozzle by hand to ensure that the
nozzle is secure.
Nozzle
Insert the nozzle until it touches
the bottom of the fitting body.
Bottom of the
fitting body.
Remove it once, and check the dimension.
Body
Union nut
Ferrule
Insert to the marking.
Gap 2mm or less
Union nut
How to mount a nozzle to the Impact-Blowgun (Series IBG)
Tighten the union nut until it touches the body.
Marking
Put a mark.
Marking
Approx. 17mm
Tighten the union nut so that
the clearance is 2mm or less.
-5-
5.How to mount a nozzle
1.
Check that the ferrule and element is
mounted inside the silent nozzle as shown in
figure on the right.
Hand-tighten the union nut. Ensure ferrule is
aligned properly.
Preparation
2.
Insert the silent nozzle until it touches the
nozzle. Then, mark a line on the nozzle at the
edge of the union nut.
3.
Remove the silent
nozzle once, and check
the dimension from the end of the nozzle to
the marking. If the dimension is different
from the
17mm, verify the alignment of the
nozzle and adjust.
Tightening
4. After verifying the dimension, insert the
silent nozzle into the nozzle again.
Confirm
that the nozzle is inserted down to
the marking.
5.
Using the tightening tool, tighten the union
nut so that the gap between the silent nozzle
and the union nut becomes 2mm or less.
6.
Pull the nozzle by hand to
ensure that the
nozzle is secure.
Silent nozzle
Union nut
Ferrule
How to mount a silent nozzle to the Impact-Blowgun (Series IBG)
Tighten the union nut until it touches
the silent nozzle
Element
Nozzle：
IBG1-12-10-*
※Refer to the attachment
”Impact-Blowgun (Series IBG)
nozzle mounting method”
for mounting method.
Insert the silent nozzle until it touches
the tip of the nozzle.
Put a mark.
Remove the silent nozzle once, and check
the dimension.
Marking
Insert to the marking.
Marking
Gap 2mm or less.
Union nut
Tighten the union nut so that the clearance
is 2mm or less.
Approx.
17mm
-6-
5.How to mount a nozzle
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
“Danger.”
They are all important notes for safety and must be followed in addition to International Standards
(ISO/IEC)
*1)
*1) ISO 4414:
I
SO 4413:
IEC 60204
ISO 102
18
etc.
Caution
Warning
Danger
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
n
ecessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specificati
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
equipment.
2. Only personnel with appropriate training should operate machinery and equipme
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not servic
confirmed.
1.
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
2.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
of all relevant products carefully.
3.
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
1.
Conditio
direct sunlight.
2.
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical tre
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
3.
An application which could have negative effects on people, property, or animals requiring special safety
analysis.
4.
Use in an interlock circuit, which re
mechanical protective function, and periodical checks to confirm proper operation.
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
They are all important notes for safety and must be followed in addition to International Standards
*1)
, and other safety regulations.
*1) ISO 4414:
Pneumatic fluid power
SO 4413:
Hydraulic fluid power
IEC 60204
-1:
Safety of machinery
18
:
Manipulating industrial robots
Caution
Warning
Danger
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
ecessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specificati
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
equipment.
2. Only personnel with appropriate training should operate machinery and equipme
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not servic
e or attempt to remove product and machinery/equipment until safety is
confirmed.
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
of all relevant products carefully.
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
Conditio
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
direct sunlight.
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical tre
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
analysis.
Use in an interlock circuit, which re
mechanical protective function, and periodical checks to confirm proper operation.
Impact blow gun
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
They are all important notes for safety and must be followed in addition to International Standards
, and other safety regulations.
Pneumatic fluid power
--
General rules relating to systems
Hydraulic fluid power
--
General rules relating to systems
Safety of machinery
--
Manipulating industrial robots
Caution
Caution
in minor or
Warning
Warning
result in
death or serious injury.
Danger
in death
or
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
ecessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specificati
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
of all relevant products carefully.
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical tre
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which re
mechanical protective function, and periodical checks to confirm proper operation.
Impact blow gun
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
They are all important notes for safety and must be followed in addition to International Standards
, and other safety regulations.
General rules relating to systems
General rules relating to systems
Electrical equipment of machines
Manipulating industrial robots
-Safety.
Caution
indicates a hazard with a low level of risk which, if not avoided, could result
in minor or
mode
rate injury.
Warning
indicates a hazard with a
death or serious injury.
indicates a hazard with a
or
serious
injury.
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
ecessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specificati
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
of all relevant products carefully.
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which re
quires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
Impact blow gun
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
They are all important notes for safety and must be followed in addition to International Standards
General rules relating to systems
General rules relating to systems
Electrical equipment of machines
indicates a hazard with a low level of risk which, if not avoided, could result
rate injury.
indicates a hazard with a
death or serious injury.
indicates a hazard with a
injury.
Warning
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specificati
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
quires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
Impact blow gun
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
They are all important notes for safety and must be followed in addition to International Standards
General rules relating to systems
.
General rules relating to systems
.
Electrical equipment of machines
.
(Part 1:
indicates a hazard with a low level of risk which, if not avoided, could result
indicates a hazard with a
medium
level of risk which, if not avoided, could
indicates a hazard with a
high
level of risk which, if not avoided,
Warning
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
This person should also continuously review all specificati
ons of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
quires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
Impact blow gun
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
They are all important notes for safety and must be followed in addition to International Standards
(Part 1:
General requirements)
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
level of risk which, if not avoided,
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
ons of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
quires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of
“Caution,” “Warning” or
They are all important notes for safety and must be followed in addition to International Standards
General requirements)
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
level of risk which, if not avoided,
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
ons of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
The assembly, operation and maintenance of machines or equipment including our products must be
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
quires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
“Caution,” “Warning” or
They are all important notes for safety and must be followed in addition to International Standards
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
level of risk which, if not avoided,
will
result
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
ons of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipme
nt.
The assembly, operation and maintenance of machines or equipment including our products must be
e or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
atment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
quires the provision of double interlock for possible failure by using a
“Caution,” “Warning” or
They are all important notes for safety and must be followed in addition to International Standards
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
result
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
ons of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
The assembly, operation and maintenance of machines or equipment including our products must be
e or attempt to remove product and machinery/equipment until safety is
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product precautions
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
ns and environments outside of the given specifications, or use outdoors or in a place exposed to
An application which could have negative effects on people, property, or animals requiring special safety
quires the provision of double interlock for possible failure by using a
-7-
The product is
The product
If considering using the product in other industries, consult
specifications or a contract if necessary.
If
anything
Limited warranty and Disclaimer/Compliance Requirements
The
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Requirements”.
Read and accept them before using the product.
Limited warranty and Disclaimer
1.
The warranty period of
delivered
Also, the product may have specified durability, running distance or replacement parts.
Pleaseconsult your nearest sales branch.
2.
For any failure or dama
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
3.
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
∗
∗∗
∗2)
Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
warranty.
Compliance Requirements
1.
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
2.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
that export are known and f
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
(measurement) laws of each country.
The product is
provided
The product
herein
If considering using the product in other industries, consult
specifications or a contract if necessary.
anything
is unclear, contact your nearest sales branch.
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Requirements”.
Read and accept them before using the product.
Limited warranty and Disclaimer
The warranty period of
delivered
,whichever is first
Also, the product may have specified durability, running distance or replacement parts.
Pleaseconsult your nearest sales branch.
For any failure or dama
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
warranty.
Compliance Requirements
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
that export are known and f
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
(measurement) laws of each country.
Impact blow gun
Safety Instructions
provided
for use in manufacturing industries.
herein
described is basically provided
If considering using the product in other industries, consult
specifications or a contract if necessary.
is unclear, contact your nearest sales branch.
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Read and accept them before using the product.
Limited warranty and Disclaimer
The warranty period of
the product is 1 year in service or 1.5 years after the product is
,whichever is first
.
∗
∗∗
∗
Also, the product may have specified durability, running distance or replacement parts.
Pleaseconsult your nearest sales branch.
For any failure or dama
ge reported within the warranty period which is clearly our
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
Compliance Requirements
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
that export are known and f
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
(measurement) laws of each country.
Impact blow gun
Safety Instructions
for use in manufacturing industries.
described is basically provided
If considering using the product in other industries, consult
specifications or a contract if necessary.
is unclear, contact your nearest sales branch.
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Read and accept them before using the product.
Limited warranty and Disclaimer
the product is 1 year in service or 1.5 years after the product is
∗
∗∗
∗
2)
Also, the product may have specified durability, running distance or replacement parts.
Pleaseconsult your nearest sales branch.
ge reported within the warranty period which is clearly our
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
Compliance Requirements
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
that export are known and f
ollowed.
ollowed.ollowed.
ollowed.
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
(measurement) laws of each country.
Impact blow gun
Safety Instructions
Caution
for use in manufacturing industries.
described is basically provided
If considering using the product in other industries, consult
specifications or a contract if necessary.
is unclear, contact your nearest sales branch.
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Read and accept them before using the product.
Limited warranty and Disclaimer
the product is 1 year in service or 1.5 years after the product is
Also, the product may have specified durability, running distance or replacement parts.
Pleaseconsult your nearest sales branch.
ge reported within the warranty period which is clearly our
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
Caution
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
Impact blow gun
Safety Instructions
Caution
for use in manufacturing industries.
described is basically provided
for peaceful use
If considering using the product in other industries, consult
is unclear, contact your nearest sales branch.
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
the product is 1 year in service or 1.5 years after the product is
Also, the product may have specified durability, running distance or replacement parts.
ge reported within the warranty period which is clearly our
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
Caution
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
Impact blow gun
Safety Instructions
for use in manufacturing industries.
for peaceful use
in manufacturing industries.
If considering using the product in other industries, consult
SMC
beforehand and exchange
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
the product is 1 year in service or 1.5 years after the product is
Also, the product may have specified durability, running distance or replacement parts.
ge reported within the warranty period which is clearly our
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
Prior to using SMC products, please read and understand the warranty terms and
disclaimers noted in the specified catalog for the particular products.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
The exports of SMC products or technology from one country to another
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification ordained by the
in manufacturing industries.
beforehand and exchange
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
the product is 1 year in service or 1.5 years after the product is
Also, the product may have specified durability, running distance or replacement parts.
ge reported within the warranty period which is clearly our
responsibility,a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
Prior to using SMC products, please read and understand the warranty terms and
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
pad or failure due to the deterioration of rubber material are not covere
d by the limited
The use of SMC products with production equipment for the manufacture of weapons of
The exports of SMC products or technology from one country to another
are
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local r
ules
SMC products are not intended for use as instruments for legal metrology.
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
Therefore, SMC products cannot be used for business or certification ordained by the
in manufacturing industries.
beforehand and exchange
Limited warranty and Disclaimer/Compliance Requirements
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
the product is 1 year in service or 1.5 years after the product is
Also, the product may have specified durability, running distance or replacement parts.
ge reported within the warranty period which is clearly our
This limited warranty applies only to our product independently, and not to any other damage
Prior to using SMC products, please read and understand the warranty terms and
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum
d by the limited
The use of SMC products with production equipment for the manufacture of weapons of
are
governed
the relevant security laws and regulation of the countries involved in the transaction. Prior
ules
governing
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
Therefore, SMC products cannot be used for business or certification ordained by the
metrology
in manufacturing industries.
beforehand and exchange
product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
the product is 1 year in service or 1.5 years after the product is
Also, the product may have specified durability, running distance or replacement parts.
ge reported within the warranty period which is clearly our
This limited warranty applies only to our product independently, and not to any other damage
Prior to using SMC products, please read and understand the warranty terms and
Also, even within the warranty period, the wear of a product due to the use of the vacuum
d by the limited
The use of SMC products with production equipment for the manufacture of weapons of
governed
by
the relevant security laws and regulation of the countries involved in the transaction. Prior
governing
Measurement instruments that SMC manufactures or sells have not been qualified by type approval
metrology
-8-
Mounting
Warning
3. Screw-in the nozzle to the torque below by holding
the flat faces on the discharge side or metal holder.
As a guideline, it is equivalent to 2 to 3 additional
turns with a tool after hand-tightening.
Flat face
Metal holder
Nozzle tightening torque range
12 to 14 N·m
Insufficient tightening may cause loosening of the nozzle.
Piping
Caution
1. Check the model, type, and size before installation.
Also, confirm that there are no scratches, gouges, or cracks on the product.
2. Preparation before piping
Before piping is connected, it should be thoroughly blown out with air (flushing)
or washed to remove chips, cutting oil, and other debris from inside the pipe.
3. Winding of sealant tape
When connecting pipes, fittings, etc., be sure that chips from the pipe
threads and sealing material do not enter the blow gun. Furthermore,
when sealant tape is used, leave 1.5 to 2 thread ridges exposed at
the end of the threads.
Winding direction
Sealant tape
Expose approx. 2 threads
4.
When tightening the threads, tighten with torque specified
in the table below. As a guideline, it is equivalent to 2 to 3
additional turns with a tool after hand-tightening.
Be careful that tightening with torque beyond the range in the
table below may cause damage to the body.
Male thread Tightening torque [N·m]
R3/8 22 to 24
5.
Allow extra length when connecting a tube to accom-
modate changes in tube length due to pressure.
6. Confirm that no twisting, turning, or tensile force or
moment load is applied to the port or tube. This may
cause fittings to fracture or tubes to be crushed,
burst, or come loose.
7. Do not abrade, entangle, or scratch the tube. This
may cause the tube to be crushed, burst, or come
loose.
Prior to Use
Warning
As the pressure of the air blow is quite powerful, do
not aim the product at another person during
operation. It may cause danger to personnel.
Additionally, the following precautions should be
taken before use.
1. Before use, make sure that the blow pressure, or
blow, will not cause surrounding objects to scatter
and injure others or damage workpieces, equip-
ment, etc., in the vicinity.
2. Wear protective eyewear when operating the
product to protect your eyes from scattering debris.
3. This product is not a toy. Do not play with the
product or use it as an air gun for fun.
4. Air pressure may cause the nozzle to fly off during
operation if it is not properly tightened. To prevent
this, be sure to check the nozzle for loosening by
pulling on it with your hands before use.
5. The grip may become hot due to repeated operation;
however, this is not abnormal.
Selection
Warning
1. Confirm the specifications.
Products represented in this catalog are designed only for use
in compressed air systems. Do not operate at pressures,
temperatures, etc., beyond the range of specifications, as this
can cause damage or malfunction.
Caution
1. Do not apply the blow gun to flammable, explosive,
or toxic substances such as gas, fuel gas, or
refrigerant. Such substances may exude from inside
the blow gun.
Mounting
Warning
1. Install a stop valve on the supply pressure side of the
blow gun.
It will be emergency shut off in case of unexpected leakage or
damage.
2. When installing a nozzle on the blow gun, wind
sealant tape around the threads of the nozzle.
Be sure to read this before handling the products. Refer to the back cover for safety
instructions. For other precautions, refer to the “Handling Precautions for SMC
Products” and the “Operation Manual” on the SMC website: https://www.smcworld.com
IBG Series
Specific Product Precautions
-9-
Maintenance
Caution
1. In periodical inspections, check the following items
and replace the parts if necessary.
a) Scratches, gouges, abrasion, corrosion
b) Air leakage
c) Twisting, crushing, and turning of connected tubes
d) Hardening, deterioration, and softening of connected tubes
e) Loosening of nozzles
2. When removing the product, first stop the pressure
supply, exhaust compressed air in the piping, and
check the condition of atmospheric release.
3.
Do not disassemble or remodel the body of the product.
Handling
Warning
1.
Air pressure may cause the nozzle to fly off during operation if it
is not properly tightened. To prevent this, be sure to check the
nozzle for loosening by pulling on it with your hands before use.
2.
Be sure to wear protective eyewear when operating the
product to protect your eyes from scattering debris.
3.
Do not direct the tip of the nozzle at the face or other
parts of a human body. It may cause danger to personnel.
4. Do not use the product to clean or remove toxic
substances or chemicals.
5. Do not drop, step on, or hit the product. It may
cause damage to the product.
6. Do not use the product to disturb public order or
public hygiene.
7. This product is not a toy.
8.
After blowing, make sure to hang the product on a hook, etc.
If leaving the product in a dusty place, particles will enter the
product and may result in a malfunction.
Hook
9.
When the blow gun is used or stored, confirm that no
twisting, turning, or tensile force or moment load is
applied to the port or tube. This may cause fittings to
fracture or tubes to be crushed, burst, or come loose.
Caution
1. Pressurizing the air blow discharge port may result
in the breakage of the product.
2.
The blow adjusting range 4 provides the maximum blow. Rotating
the adjuster more than 4 may result in the breakage of the product.
Lubrication
Warning
1. Do not lubricate the product.
It may contaminate or damage the target object.
Air Supply
Warning
1. Use clean air.
Do not use compressed air that contains chemicals, synthetic
oils that include organic solvents, salt, corrosive gases, etc.,
as it can cause damage or malfunction.
Caution
1. Install an air filter.
Install an air filter upstream near the blow gun. Select an air
filter with a filtration size of 5 μm or smaller.
2.
Take measures to ensure air quality, such as by
installing an aftercooler, air dryer, or water separator.
Compressed air that contains a large amount of drainage can
cause the malfunction of the blow gun and contaminate or
damage the target object. Therefore, take appropriate
measures to ensure air quality, such as by providing an
aftercooler, air dryer, or water separator.
Operating Environment
Warning
1. Do not use in an atmosphere where corrosive
gases, chemicals, sea water, water, or water steam
are present. Do not use in cases where there is
direct contact with any of the above.
2. Do not expose the product to direct sunlight for an
extended period of time.
3. Do not use in locations where radiated heat will be
received from nearby heat sources.
4. Do not use in an environment where static electricity
is a problem. It may result in system failure or
malfunction. Please contact SMC for use in such an
environment.
5. Do not use in an environment where spatters are
generated. Spattering may result in a fire hazard.
Please contact SMC for use in such an environment.
6. Do not use in an environment where the product is
exposed to cutting oil, lubricating oil, or coolant oil.
Please contact SMC for use in such an environment.
Be sure to read this before handling the products. Refer to the back cover for safety
instructions. For other precautions, refer to the “Handling Precautions for SMC
Products” and the “Operation Manual” on the SMC website: https://www.smcworld.com
IBG Series
Specific Product Precautions
-10-
This manual suits for next models
3
Other SMC Networks Power Tools manuals
