SMC Networks 9712F - FICHE TECHNIQUE User manual

Features and Benefits
High Performance & Functionality
lHigh Port Density – Up to 96 10/100, 96
MMF/SMF 100BASE-FX, or 4 1000BASE-X ports
lFully featured with Layer switching or Layer 3
routing on the switch fabric blade
lConvenient Expansion – A variety of hot swappable
blades are available to suit your specific
networking needs
lOperating at wire-speed for optimal switching and
IP routing performance
l** 4Gbps non-blocking switching and routing
bandwidth
lRouting protocols supported are IP (RIP, RIP v )
lFault Tolerant: Optional redundant power supply,
switch fabric/management blade, and fan unit
Flexible System Management
lQoS expedites critical data via prioritising
and filtering
lMultiLink Trunking creates high-speed data paths
to servers or other switches
lSupport up to 56 VLANs, port and protocol based
lIGMP Snooping reduces multicast traffic for
maximum performance
l4 group RMON support for detailed monitoring of
network management
lMirror port traffic from any port for easy
troubleshooting
lSystem and port security features to protect
from intruders.
lFuture feature support include DiffServ, CIDR,
security for both port and access
Compatibility
lIIEEEEEE80 .3, 80 .3u, 80 .3z, 80 .1d, 80 .3x,
80 .1p, 80 .1q, 80 .3ad
** For maximum performance it is recommended to limit
the number of Gigabit ports to 1 due to backplane
capacity (1 Gbps).
TigerChassis™ 10/100/1000
SMC9712G
Data Sheet
Product Model No. Description
TigerChassis SMC971 G Multilayer Backbone Chassis
10/100/1000 Switch with 1 slots for module
expansion, populated with one
L3 routing engine/ CPU
management agent, 1 power unit,
and fan units
SMC971 NMM Network Management Module
for SMC971 G
SMC971 G 8 10BASE-T/ 100BASE-TX
RJ-45 ports
SMC971 FMMT 8 100BASE-FX MMF MTRJ ports
SMC971 FSMT 8 100BASE-FX SMF MTRJ ports
SMC971 GT/ 10/100/1000BASE-T RJ-45 port
SMC971 GB/ 1000BASE-X GBIC ports
(transceivers are sold separately)
SMC971 GT 1 10/100/1000BASE-T RJ-45 port
SMC971 GSSC 1 1000BASE-SX SC port
SMC971 GB 1 1000BASE-X GBIC port
(transceivers are sold separately)
SMCBGSSCX1 1 1000BASE-SX port GBIC trans.
SMCBGLSCX1 1 1000BASE-LX port GBIC trans.
SMC971 P Redundant Power Supply Unit
SMC971 F Replacement Fan Unit
SMC9712G
TigerChassis™ 10/100/1000
Multilayer Backbone Chassis Switch
The TigerChassis 10/100/1000 is a powerful network
backbone switch that combines wire-speed Layer
switching and Layer 3 routing for small and medium
enterprise-level applications. The SMC971 G includes a
built-in management agent/L3 routing engine with an
open slot for optional agent backup as well as in an
open slot for an optional redundant power supply. With
1 available slots for media interface blades (modules)
and 4Gbps of switching bandwidth, the 971 G is
capable of delivering a flexible combination of Gigabit
and Fast Ethernet connectivity.
The TigerChassis 10/100/1000 is equipped with
Layer 3 line-speed IP routing capabilites that far
outperform traditional standalone routers in terms of
packet forwarding rate. The 971 G also includes an
array of network management features such as QoS,
VLAN and Multi-Link Trunking which provide security
and efficiency for today´s bandwidth intensive, multi-
media applications.

SMC is a registered trademark; and EtherPower, EZStart, SimulTasking, TigerSwitch and SuperDisk are trademarks of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of their respective holders. © Copyright 001 SMC Networks, Inc.
L
i
m
i
t
e
d
L
i
f
e
t
i
m
e
W
a
r
r
a
n
t
y
L
i
m
i
t
e
d
L
i
f
e
t
i
m
e
W
a
r
r
a
n
t
y
TigerChassis™ 10/100/1000
SMC9712G
Data Sheet
Specifications
Physical Characteristics
ase Unit
lSMC971 G: preconfigured with 1
management agent/L3 routing
engine fans, and 1 power supply.
1 slots available for media expansion
Slide-in Media Modules
l8 10/100BASE-TX (RJ-45) ports
l1 100BASE-FX ports (SC) or
10/100/1000BASE-T (RJ-45) ports
l 1000BASE-SX ports (MTRJ) or
10/100/1000BASE-T (RJ-45) ports
l1 1000BASE-X port (GBIC)
l 1000BASE-X port (GBICs)
Network Interface
l10BASE-T: RJ-45 UTP CAT. 3,4,5
l100BASE-TX: RJ-45 UTP Cat. 5
l100BASE-FX: MT-RJ connectors
l1000BASE-SX: SC connector
lMultimode fiber cable: 6 .5/1 5 or
50/1 5 microns
lSinglemode fiber cable: 9/1 5
microns
andwidth
l4Gbps
l18Mbps forwarding rate
Switching Database
l3 K MAC address routing table
LED
lDiag, Release, Link, Power, Primary,
Mode: activity, full-duplex, flow
control, AC/DC power
Weight
l.7kg
Size
l308.6 x 440 x 300 (mm)
Temperature
lOperation: 0 to 50 degrees C
lStorage: -40 to 70 degree C
Humidity
l10% to 90%
AC Input
l100 to 40V, 47 to 63 Hz
Power Supply
lInternal, auto-ranging transformer:
100 to 40VAC, 47 to 63 Hz
lRedundant DC input
Power Consumption
lMaximum Current 4A@ 115VAC, A
@ 40VAC
Heat Dissipation
lHeat dissipation/hour: 10 6BTU/hr
(chassis)
lMaximum wattage: 00 Watt
Switch Features
Filtering and Forwarding Rate
lLine speed (Layer /3)
Address Table
l3 K MAC entries
lK IP route table
l1 IP interfaces
Switching Protocols
lAll common protocols such as
NetBeui, NetBIOS, SNA, DECnet LAT
Routing Method
lIP – RIP, R I P v
IP Multicast Routing
lOSPF*, DVMRP*, IGMP v , ICMP,
UDP Helper
Standards Conformance
QOS
lIEEE80 .1q up to 56 VLAN
groups, IEEE80 .1p up to 4
priority queues
Management Features
Management
lAll relevant MIBs, including those
for SNMP, RMON (4 groups), VLANs,
Ethernet, Bridges, RIP, RIPv , IP
forwarding, IP Address Resolution
with CIDR, Ipv4 Routers, IP Router
Alert, DHCP
In- and Management
lTelnet,SLIP, Web-based HTTP, or
SNMP manager
Out-of- and Management
lRS- 3 DB-9 console port
Software Loading
lTFTP i n-band or Xmodem
out-of-band
MI Support
lMIB II (RFC 1 13), Bridging MIB
(RFC 1493), Ethernet-Like MIB (RFC
1643), RMON MIB (RFC 1757),
SMC’s private MIB
ROM Support
lGroups 1, ,3, 9 (Statistics, History,
Alarm, Event)
Safety
lUL 1950, CSA-C . No. 950, CE-
73/ 3/EEC (EN 60950)
lEMC: FCC Part 15 Class A, CE-
9/336/EEC (EN 550 Class B,
EN 5008 -1)
lMTBF is calculated using Bellcore
Issue 6, Bellcore "Method 1, case
3" for final calculation at 5C, 40C
and 50C. Bellcore "Method 1, case
3" for preliminary calculations. Power
Supply Module shall have a
minimum MTBF rating of 100,000
hours, Future supported feature.
* Feature supported in future
firmware release
www.smc.com www.smc-europe.com
SMC Networks Europe
Head ffice
Edificio Conata II
Fructuós Gelabert 6-8 0,4a
08970 - Sant Joan Despi
Barcelona
Spain
Telephone
[phone]
Facsimile
[phone]
SMC Networks
Spain & Portugal
Calle Josefa Valcarcel, 8
80 7 - Madrid
Spain
Telephone
[phone]
Facsimile
[phone]
SMC Networks
Northern Europe
Ground Floor, Exa House
Alexandra Court
Denmark Street
Wokingham
Berkshire, RG40 SL
United Kingdom
Telephone
[phone]
Facsimile
[phone]
SMC Networks
Nordic
Vallingbyplan 6, tr
SE-16 65 Vallingby
Sweden
Telephone
[phone]
Facsimile
[phone]
SMC Networks
Sub-Saharan Africa
81 Tsessebe Cresent
Corporate Park
Mirand Old Pretoria Road
1685 Johannesburg
South Africa
Telephone
+ 7 (0) 113 14 48 73
Facsimile
+ 7 (0) 113 14 91 33
SMC Networks
Southern Europe
- 8 rue des Bourets
9 150 Suresnes
France
Telephone
[phone]
Facsimile
[phone]
SMC Networks
Central Europe
Freischützstr. 81
D-819 7 Munich
Germany
Telephone
[phone]
Facsimile
[phone]