Smeg PGA75F-4 User manual

PGA75F-4 smeg 72cm flushmount cooktop
ID160812
Code PGA75F-4
finish satin stainless steel
cast-iron trivets & burner caps
installation built-in one-piece hob suited to stone and
composite quartz-resin benches
NB: flushmount
actual size 720mmW x 512mmD x 75mmH (excluding
control knob height)
cutout • outer rebate: 721mmW x 513mmD
• inner cutout: 700mmW x 492mmD x 75mmH
capacity
37.8 mj/hr max over ve burners
• ultra-rapid triple burner, 15 mj/hr
• 2 x semi-rapid burners, 7.5 mj/hr
each
• 2 x auxiliary burners, 3.9 mj/hr each
ignition automatic electronic
safety flame failure device (FFD) fitted to each burner
gas input set for natural gas — regulator supplied
adaptable for ULPG — no regulator required
accessories 3x heavy-duty cast-iron trivets, cast-iron pot rest &
wok stand
option Linear design control knobs (included)
warranty two years parts and labour
FLUSH MOUNTING
Completely flush with the benchline — that is, the stainless steel of the
hob does not extrude above the height of the bench — the PGA75F-4
offers a fresh and alternative perspective to cooktop design. Stone
benchtops of, for instance, marble, granite and the new composite
resin-quartz materials, are perfectly suited to this cooktop.
SPACIOUS DESIGN
When space is not restrictive, this wide 72cm hob offers five burners
ergonomically positioned for maximum benefit with the possibility of
several styles of cooking at the one time.
ULTRA-RAPID BURNER
Centrally located, this large and versatile burner suits the larger stock
pots, boilers, saucepans and griddles. A wok stand is supplied for easy
fitment over the centre trivet for stir-fry cooking.
ELECTRONIC IGNITION
The cooktop is connected with a power cord of 1.3 metre length to be
plugged into a GPO located according to installation needs below the
benchline. This supplies a continuous stored charge to spark the gas
supply to the individual burner of your choice.
FLAME FAILURE DEVICE
A flame failure device is fitted to all five burners. The FFD ensures
that should a flame be extinguished accidentally. the gas supply to the
specific burner(s) is stopped within four seconds. For absolute safety, the
burner(s) can only be reignited by physically resetting the control knob(s)
to the OFF position and then following normal ignition procedure.
Simply depress and turn the control of the desired cooking zone for
almost instant flame ignition.
LOW MAINTENANCE
The seamless hob design allows for easy wipe-over cleaning. The
control knobs are removable for cleaning access. Trivets, burner
assemblies and wok stand can be washed in warm soapy water.
INSTALLATION
With a benchtop displacement of 75mm, the installation underbench is
possible of oven, drawers or cupboards.
CANALI DESIGN
The PGA75F-4 fits within a large and comprehensive portfolio of Smeg
appliances with complementing aesthetics. The architectural detailing of
Guido Canali makes possible the matching of appliances, including the
oven and dishwasher.
CAST-IRON POT REST
This sturdy cast-iron accessory can sit on the cast-iron trivet above any
burner. The extra space this pot rest creates above the simmer flame
enables very controllable low heat cooking.
Canali design knob

PGA75F-4 smeg 72cm flushmount cooktop
ID160812
Code PGA75F-4
WARNING: technical specications and product sizes can be varied by the manufacturer, without notice.
Cutouts for appliances should only be by physical product measurements. The above information is
indicative only.
PLEASE NOTE: this cooktop is designed to be installed into stone and composite quartz-resin bench-
tops
height 75mm includes trivets
width 720mm
depth 512mm
outer rebate cutout 3mmH x 721mmW x 513mmD
inner main cutout 75mmH x 700mmW x 492mmD
packaged dimensions 820mm x 620mm x 180mm = 0.09m³
net weight 15.7kg
gross weight 17.1kg
maximum gas input
rate
• ½” BSP gas inlet connection
• gas connection located right-hand rear corner
• ½” BSP 1.0 kPa natural gas regulator is
supplied with natural gas hobs
• adaptable for ULPG — no regulator required
ignition 1.3 metre length power cord, suitable for standard 10 amp GPO
supplied clips, seal, instructions for installation, operation, maintenance
NB drawings are not to scale — they are to assist only
513
492
A
3
A