Smith Medical Medex LogiCal User guide
LogiCal®5ml Closed Blood
Sampling System
Quick Blood Sampling Operation Guide
• Verify the reservoir stopcock “OFF”
arrow points to the reservoir syringe
and reservoir syringe plunger is on
0ml position.
Prior to Sampling
1
• Turn the reservoir stopcock “OFF”
arrow to point upstream to the fluid
bag.
• Locate the in-line needle-free
blood sampling site and cleanse the
sampling site per hospital policy
and procedure.
• Slowly pull the reservoir syringe
plunger down to the 5ml position to
draw back fluid, bringing undiluted
blood to the sampling site.
• Turn the reservoir stopcock “OFF”
arrow to point downstream to the
patient.
Prepare the system to obtain
blood samples:
2
• Connect a Luer lock syringe or
sampling device to the in-line
needle-free blood sampling site.
• Gently withdraw the desired blood
sample.
• Disconnect the Luer lock syringe
or sampling device from the in-line
needle-free blood sampling site.
Obtaining blood samples:
3
STEPS 4-5
CONTINUED ON REVERSE
BEFORE YOU START
Remove the kit from the pack, confirm
all Luer connectors are tightened.
Attach and mount the LogiCal®
5ml closed blood sampling system
properly to the mounting system.*
Before you start to obtain a blood
sample, verify the system is primed
per the IFU and the fluid bag is
pressurised to 300mmHg and placed
at a higher level than the system.
* The mounting system consists of the LogiCal®
transducer plates, clamp, brackets and cables.
See LogiCal®5 ml Closed Blood Sampling
System brochure for references.
PRODUCT(S) DESCRIBED MAY NOT BE LICENSED OR AVAILABLE FOR SALE IN CANADA AND OTHER COUNTRIES
Smiths Medical International Ltd.
Hythe, Kent CT21 6JL, UK
Tel: +44 (0)1303 260551
Find your local contact information at: www.smiths-medical.com/customer-support
Smiths Medical is part of the global technology business Smiths Group plc. Please see the Instructions for Use/Operator’s Manual for a complete listing of the indications, contraindications, warnings
and precautions. Medex, LogiCal and the Smiths Medical logo are trademarks of Smiths Medical. The symbol ® indicates the trademark is registered in the U.S. Patent and Trademark Office and
certain other countries. All other names and marks mentioned are the trademarks or service marks of their respective owners.
©2016 Smiths Medical. All rights reserved. MX195041GB-072016
MHYTCA-1180
For more information visit our website at www.smiths-medical.com
• Turn the reservoir stopcock “OFF”
arrow to point away from the
reservoir syringe.
• Slowly press the reservoir syringe
plunger back to the 0ml position to
re-infuse the patient’s blood.
• Activate the flush device until blood
is cleared from the line. Short
flushes may clear the line better.
Verify the reservoir syringe plunger
is at the 0ml position while flushing
for adequate clearing.
Reinfuse blood and flush system
4
• After flushing, verify the reservoir
syringe plunger is at the 0ml
position.
• Turn the reservoir stopcock “OFF”
arrow to point to the reservoir
syringe.
• Cleanse the sampling site per
hospital policy and procedure.
• The system now is back to pressure
monitoring position
Return to monitoring position
5
EC Authorised Representative
Smiths Medical International
TN25 4BF, UK
Tel: +44 (0)1233 722100
Smiths Medical International
1500 Eureka Park, Lower Pemberton
Ashford, Kent, TN25 4BF
Tel: +44 (0)845 850 0445
This Operations Guide demonstrates
the main steps for obtaining a blood
sample using the LogiCal®5ml
Closed Blood Sampling System.
Prior to using this system, you must
receive full training and read the
Instructions For Use for detailed
instructions, warnings and cautions
associated with the use of this device.
LogiCal®5ml Closed Blood Sampling System
Code Line Length Line Type Reservoir Mount
Location Units Per Box
MX96AE181P1 183cm Single/Anti-Shunt IV Pole 20
MX961E181P1 183cm Single IV Pole 20
MX961G181P1 183cm Single Arm 20
MX962E181P1 183cm Double IV Pole 20
MX962G181P1 183cm Double Arm 20
MX963E181P1 183cm Triple IV Pole 10
MX401G151P1 152cm Single/Add on kit Arm 20
MX96AE211P1 213cm Single/Anti-Shunt IV Pole 20
MX961E211P1 213cm Single IV Pole 20
MX962E211P1 213cm Double IV Pole 20
MX963E211P1 213cm Triple IV Pole 10
Accessories
Reorder Code Description Units Per Box
MX260-PMCZ Patient arm mount attachment 50
ORDERING INFORMATION
