SMITH SYSTEM Diamond User manual

For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 04/2013
Diamond Desk Installation Instructions
03082

For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 04/2013
Components and Hardware
Replacement Hardware Pack:
1. 69761 BLA/ZINC-R
a. (2) 70867 –Connector Bolt ¼-20x23mm
b. (2) 70869 –Connector Nut ¼-20x17mm
c. (14) 70080 - #10x5/8 Truss Head Phillips Head
d. (1) 77813 –Hex Key Allen Wrench 3/16”
Connector Bolt ¼-20 X 23mm
P/N: 70867
QTY: 2
Connector Nut ¼-20 x 17mm
P/N: 70869
QTY: 2
#10 x 5/8” Wood Screw
P/N: 70080
QTY: 14
Hex Key Allen Wrench 3/16”
P/N: 77813
QTY: 1
Diamond Top
QTY: 1
SS Leg and Center Leg Weldment
QTY: 1 each

For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 04/2013
Assembly Instructions
Step 1: Align the center support with the pre-drills on the top.
Step 2: Position the other legs as shown below, aligning them with the pre-drills.
Step 3: Secure the legs together loosely with the connector bolts provided.
Step 4: Fasten the frame assembly to the top using the (14) 5/8” wood screws provided.
Step 5: Tighten the connector bolt using the Allen Key (Hex Key) provided.
Connector Bolt