
5
To Turn On: Hold the power button in for 2 seconds
(you will hear a beep). If the white status light is on,
the SmrtMugg Go is powered on and/or heating.
To power o, hold the power button for 2 seconds.
If the white status light is o, the SmrtMugg Go is in
sleep mode.
Press the power button once to check temperature
of the contents in Celsius, and press again to check
the temperature in Fahrenheit
Click the button a third time and the display will show the remaining bat-
tery amount. Battery full : 50% battery : low level
While powered on, if the indicator light starts blinking, the battery is
nearly empty. Please plug it in and charge soon. The SmrtMugg Go will
power down once the battery is fully depleted.
1
2
The charging indicator will slowly blink or ash
while the battery is charging. Once the light stays
on, the battery is fully charged. Please note the Sm-
rtMugg Go is designed to keep hot beverages hot
for approx. 90 minutes from a full battery charge. If
you pour in a liquid that is colder and needs to
be heated up, then the battery will deplete
faster.
Press the button for 2 seconds to power on, you
will hear a beep and the light will stay on. The
SmrtMugg Go will heat to 50°C or 122°F.
You can turn on the heater while charging (if there
is enough battery charge to do so). While charging,
press the power button for 2 seconds to turn on
the mug. Please note charging will slow down
while mug is powered on.
3
4
5
45 C
Charging mode:
Heating mode:
Heating while
charging: