SNOWJOE AQUAJOE SJ-SHSBB-WHT-RM User manual

1
If you have any questions or comments,
please call the Snow Joe®+ Sun Joe®customer service department at:
Model SJ-SHSBB-WHT-RM
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
STEEL GARDEN
HOSE HOLDER
WITH FAUCET
1-866-SNOWJOE (1-866-766-9563)
SJ-SJ-SHSBB-WHT-RM-880E-M-V1

2
STEEL GARDEN
HOSE HOLDER
WITH FAUCET
If you have any questions or comments,
please call the Snow Joe®+ Sun Joe®customer service department at:
1-866-SNOWJOE (1-866-766-9563)
SJ-SJ-SHSBB-WHT-RM-880E-M-V1
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
Model SJ-SHSBB-WHT-RM

3
Know Your Steel Garden Hose Holder
Read the owner’s manual and safety instructions carefully before using the steel garden hose holder. Compare the illustration below to
the steel garden hose holder in order to familiarize yourself with the product.
Save this manual for future reference.
1. Hose holder
2. Front faucet
3. Rear inlet
4. S-type nut
5. Top post
6. Bottom post
7. Base
8. Secondary stake
9. Primary stake
5
6
7
8
3
4
1
2
9
Technical Data
Product Dimensions: .................................................................. 9.8 in. W x 42.5 in. H x 10.2 in. D (25 cm W x 108 cm H x 26 cm D)
Anchoring System ................................................................................................................................2-Point Secure Anchor System
Storage Capacity............................................................................................................Up to 125 feet (38 m) of 5/8 in. (1.6 cm) hose
Material............................................................................................................... Heavy gauge solid steel construction + brass spigot
Net Weight......................................................................................................................................................................7.3 lbs (3.3 kg)
Fits standard garden hose

4
Unpacking
Carton Contents
• Topandbottomposts
• S-typenut
• M6x50screw
• Hoseholder
• Manuals+Registrationcard
1. Carefully remove the steel garden hose holder and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damageoccurredduringshipping.Ifyounddamagedor
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe®+ Sun Joe®customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the steel garden hose
holder. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils or
small parts. These items can be swallowed and pose a
suocationrisk!
Assembly
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
1. To assemble the hose stand post, take the top and
bottompostandttogetherbyslidingthetoppostover
the connecting post. Depress the push button on the
connecting post enough to slide into the top post (Fig. 1).
2. Slide the top post over the connecting post until the push
button locks into place in its respective hole on the top
post (Fig. 2).
3. Insert the hose holder into the corresponding holes on the
assembled hose stand post (Fig. 3 and Fig. 4).
Fig. 1
Top post
Bottom post
Connecting
post
Push
button
Fig. 2
Top
post
Bottom
post
push
buttons
Connecting
post
Fig. 3
Assembled
hose stand
post
Hose holder
Fig. 4

5
4. Using the M6x50 screw and s-type nut, secure the hose
holder in place (Fig. 5).
Operation
1. Wearing work boots or other appropriate close-toed
shoes,rmlystepdownonthebaseandpushtheprimary
and secondary stakes completely into the ground (Fig. 6).
Make sure your steel garden hose holder is secure
before use.
mWARNING! Do not install your steel garden hose holder
in soft ground or mulch.
2. Connect your water source to the rear inlet (Fig. 7).
3. Connect your hose to the front faucet (Fig. 7).
Service + Support
If your Aqua Joe®SJ-SHSBB-WHT-RM steel garden hose holder
requires service or maintenance, please call Snow Joe®+
Sun Joe®customer service at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an
authorized dealer, you will need to provide the model and serial
numbers, which can be found on the decal located on the steel
garden hose holder. Copy these numbers into the space
provided below.
Fig. 5
M6x50 Screw
S-type
nut
Fig. 6
Base
Primary stake
Secondary
stake
Fig. 7
Front
faucet
Rear
inlet
Record the following numbers from your new product:
Model #:
Serial #:
S J - S H S B B - W H T - R M