SNOWJOE Sunjoe SPX-FC26-RM User manual

R
SPX-FC26-RM ASSEMBLY QUICK GUIDE
If you have any questions or comments,
please call the Snow Joe®+ Sun Joe®customer service department at:
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1-866-SNOWJOE (1-866-766-9563)

1
Locking collar
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT
Trigger gun
Locking collar
SPX200/1000 Series
Trigger gun Middle wand
Locking collar
Most SPX3000 and SPX4000 Series
Trigger gun
Pistola
Pistolet
Transfer adapter
Locking collar
Most SPX2000 Series + SPX4003-ELT, SPX7001E
Trigger gun
R
SPX-FC26-RM ASSEMBLY QUICK GUIDE
If you have any questions or comments,
please call the Snow Joe®+ Sun Joe®customer service department at:
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
Trigger gun
1-866-SNOWJOE (1-866-766-9563)

2
FOR USE WITH
SPX200/1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains
attached to your trigger gun.
2. Take the foam cannon and align the two tabs with the middle wand.
3. Once aligned, insert the tip of the locking collar on the foam cannon into the
middle wand and twist counter clockwise to lock into place.
4. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place and twist to lock.
FOR USE WITH
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the foam cannon and align the two tabs with the trigger gun.
3. Once aligned, insert the tip of the locking collar on the foam cannon into the
trigger gun, twist counter clockwise to lock into place.
4. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place.
FOR USE WITH
MOST SPX2000 SERIES + SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the foam cannon and align the two tabs with the trigger gun.
3. Once aligned, insert the tip of the locking collar on the foam cannon into the
trigger gun, twist counter clockwise to lock into place.
4. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place.
FOR USE WITH
MOST SPX3000 AND SPX4000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the foam cannon and align the two tabs with the transfer adapter.
4. Once aligned, insert the tip of the locking collar on the foam cannon into the
transfer adapter,twist counter clockwise to lock into place.
5. Adjust the foam cannon if needed. After any adjustment is made, use the
locking collar to lock the attachment into place and twist to lock.
NOTE:
1. There is a soap knob on the top of your SPX-FC26-RM. Turn it clockwise
to release soap, and counter clockwise to stop.
2. You can adjust the amount of soap you would like to release by turning the
front part of your SPX-FC26-RM. Turn clockwise for a larger spray, and
counter clockwise for a pin point spray.
Only use detergents specically recommended for use with pressure
washers, such as Sun Joe®HOUSE + DECK WASH (SPX-HDC1G), Sun
Joe®SNOW FOAM AUTO WASH (SPX-FCS1G), or Sun Joe®HEAVY DUTY
CLEANER (SPX-APC1G).
DO NOT USE household detergents, acids, alkaline solutions, bleaches,
solvents, ammable material, or industrial grade solutions. These can
damage the pump.
Service + Support
If your Sun Joe®SPX-RB1-RM requires service or maintenance, please
call Snow Joe®+ Sun Joe®customer service at 1-866-SNOWJOE (1-866-
766-9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an authorized
dealer, you will need to provide the model and serial numbers, which can
be found on the decal located on the sprinkler. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle
of your new product:
Model #:
Serial #:
S P X - F C 2 6 - R M

SNOW JOE®+ SUN JOE®REFURBISHED GOODS WARRANTY
GENERAL CONDITIONS:
Snow Joe®+ Sun Joe®operating under Snow Joe®, LLC warrants
this refurbished product to the original purchaser for 90 days
against defects in material or workmanship when used for normal
residential purposes. If a replacement part or product is needed,
it will be sent free of charge to the original purchaser except as
noted below.
The duration of this warranty applies only if the product is put to
personal use around the household. It is the owner’s responsibility
to correctly perform all maintenance and minor adjustments
explained in the owner’s manual.
HOW TO OBTAIN YOUR REPLACEMENT PART OR PRODUCT:
To obtain a replacement part or product, please visit
snowjoe.com/help or email us at [email protected] for
instructions. Please be sure to register your unit beforehand
to speed up this process. Certain products may require a serial
number, typically found on the decal afxed to the housing
or guard of your product. All products require a valid proof
of purchase.
EXCLUSIONS:
• Wearing parts like belts, augers, chains and tines are
not covered under this warranty. Wearing parts can be
purchased at snowjoe.com or by calling 1-866-SNOWJOE
(1-866-766-9563).
• Batteries are covered in full for 90-days from the date of
purchase.
Snow Joe®+ Sun Joe®may from time to time change the design of
its products. Nothing contained in this warranty shall be construed
as obligating Snow Joe®+ Sun Joe®to incorporate such design
changes into previously manufactured products, nor shall such
changes be construed as an admission that previous designs
were defective.
This warranty is intended to cover product defects only.
Snow Joe®, LLC is not liable for indirect, incidental or
consequential damages in connection with the use or misuse of
the Snow Joe®+ Sun Joe®products covered by this warranty.
This warranty does not cover any cost or expense incurred
by the purchaser in providing substitute equipment or service
during reasonable periods of malfunction or non-use of this product
while waiting for a replacement part or unit under this warranty.
Some states do not allow exclusions of incidental or consequential
damages so the above exclusions may not apply in all states. This
warranty may give you specic legal rights in your state.
HOW TO REACH US:
We’re here to help Monday through Friday from 9AM to 7PM EST
and Saturday and Sunday 9AM to 4PM. You can reach us at
1-866-SNOWJOE (1 866-766-9563), online at snowjoe.com, via
email at [email protected] or tweet us @snowjoe.
EXPORTS:
Customers who have purchased Snow Joe®+ Sun Joe®
products exported from the United States and Canada should
contact their Snow Joe®+ Sun Joe® distributor (dealer) to obtain
information applicable to your country, province or state. If for
any reason, you are not satised with the distributor’s service,
or if you have difculty obtaining warranty information, contact
your Snow Joe®+ Sun Joe®seller. If in the event your efforts are
unsatisfactory, please reach out to us directly.