Sodex Sport S16350 User manual

DESCRIPTION
Steel structure D27
Powder coated
1m x 1m
ASSEMBLY INSTRUCTION
TCHOUCKBALL 1x1M
PRODUCT REF S16350 UNIT
ASSEMBLY TIME
The time to make the assembly is estimated for 1 persons, at 30 minutes.
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is advised to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental
WARRANTY
One full year parts and labour guarantee. Every claim regarding the condition of the delivered equipment has to be
done within the legal period, of the reception of the material.
The warranty will not apply to:
- All degradation during the transport.
- All degradation due to poor maintenance.
- All degradation due to use differing from which was intended
- Any defect claimed after the end of the legal period.
- Any damage due to a faulty installation or assembly of the module

2
ASSEMBLY
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1– ASSEMBLY OF THE MAIN FRAME (x1)
Wrench 13mm
x4
Washer BC 8
x2
Screw BC M8x50
x2
Turn-knob
M10x15
x2
Connectors
x6
Round head screw
BC M8x20
x2
Locknut BC M8
Round head
screw BC M8x20
x2
Round head screw
BC M8x20
Round head
screw BC M8x20
Allen key 5

3
ASSEMBLY
ELEMENTS
NECESSAIRES
2– ASSEMBLY OF THE CONNECTORS (x1)
NECESSARY
ITEMS
3– ASSEMBLY OF BOTH FRAMES (x1)
Round head
screw BC M8x20
x2
Connectors
x4
Round head screw
BC M8x20
Screw BC M8x50
Washer BC 8
Locknut BC M8
x4
Washer BC 8
x2
Screw BC
M8x50
x2
Turn-knob
M10x15
x2
Locknut BC M8
Turn-knob
M10x15

4
ASSEMBLY
4– ASSEMBLY THE NET
NECESSARY
ITEMS
In order to stretch the net correctly, please position the
ties by following the steps below:
12
34
Note 1: It's recommended to first attach
the top corners and then the bottom
corners before attaching the rest.
Note 2: It's also recommended to use
two ties in each corner for optimal net
tension
(see image on the right).
X20
Ties

NOMENCLATURE
Package
No Ref Index Designation Description Quantity Packing method Weight (kg)
Dim.
(mm)
A1
S16350-01 C
Bar 1 1
Plastic
bubbles +
cardboard 5
layers
6.5 1050x800x150
Bar 2 1
Bar 3 1
S16350-02 CNet + ties 1+20
ACCESSORIES IN PVC CLEAR BAG
Package
N° Designation Description Qty Remark
A1 Connectors 2 To adjust the inclination
A1
Screw BC M8x50 +
washer BC M8 +
Locknut BC M8
2+4+2 To fix the different parts
of the frame
A1 Round head screw
BC M8x20 6To fix the different parts of the frame
A1 Turn-knob M10x15 2To adjust the inclination
PRE-ASSEMBLED ACCESSORIES
Package
N° Designation Description Qty Remark
A1 Rubbers 4
VISA PACKING DEPARTMENT DATE : 12/10/2018
PACKING LIST
TCHOUCKBALL 1x1M
PRODUCT REF S16350 Index C UNIT