Sodex Sport S28211 Quick start guide

DESCRIPTION
Steel structure 30x30
Powder coated
CONFORM
ASSEMBLY INSTRUCTIONS
FOLDABLE MOBILE WALL
PRODUCT REF :S28211 UNIT
ASSEMBLY TIME
The assembly time for foldable mobile wall is estimated at 15 minutes with 1 people.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened.
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the
manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has
to be done within the legal period of the reception of the material. The warranty will not apply to:
- All degradation during the transport.
- All degradation due to use differing from which was intended.
- All degradation due to poor maintenance.
- Any defect claimed after the end of the legal period.
- Any damaged due to a faulty installation and assembly of the module.

2
ASSEMBLY
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Mallet
Wrench 17mm
x2
Turn knob ISO
M10x30
x6
Screws BC M10x25
x6
Washers BC 10
x6
PVC cap 30x30
x2
Sandow 300 mm
x2
Swivel wheel D80 with
brake thread M12
x2
Swivel wheel D80 without
brake thread M12
PVC cap 30x30
Turn knob ISO
M10x30
Swivel wheel D80 with
brake thread M12
PVC cap 30x30
Swivel wheel D80 without
brake thread M12
1– ASSEMBLY OF THE FRAME ‘T’ SHAPE (x2)
x1
Turn knob ISO
M10x30
x3
PVC cap 30x30
x1
Swivel wheel D80 with
brake thread M12
x1
Swivel wheel D80 without
brake thread M12

3
ASSEMBLY
NECESSARY
ITEMS
2– ASSEMBLY OF THE TARP
Tarp
STEP 1:
Insert the transversal bar into the tarp
Transversal bar
STEP 2:
Assembly of the tarp to the frame
Screw BC M10x25
+ Washer BC 10
Transversal bar
Tarp
Frame 'T' shape
Screw BC M10x25
+ Washer BC 10
x6
Screws BC M10x25
x6
Washers BC 10
Screw BC M10x25
+ Washer BC 10

4
NECESSARY
ITEMS
ASSEMBLY
Sandow 300 mm
3– FIXING THE SANDOW
Maintain the tarp by tying it to the frame
Eyelets D12
x2
Sandow 300 mm
Ballast

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg)
Dim.
(mm)
A1 S28211-21
+ S28211-22
A +
ARight Side + Left Side 1 + 1
Plastic bubbles
+ cardboard 5
layers
10 1360x830x250
A2
S28205-1 +
S28205-3
+S28205-4
B +
C +
B
Transversal bar + Tarp +
Ballast 3+1+2 Cardboard 5 layers 25
3950x200x200
The tubes
used as ballast
are chosen
according to
the available
scraps.
Tarp is rolled
around the
other elements
A3 S28211-9CAccessories 1Cardboard 5
layers 2300x100x100
ACCESSORIES PUT IN CLEAR PVC BAG
Package
N° Ref Designation Description Qty Note
A3 BTBH1025
+LTBA102310
Screw BC M10x25 +
Washers BC 10 6 + 6
To assemble the
transversal bar at the
sides
A3 NVN1030 Turn knob ISO M10x30 2
To maintain the wall
once in the unfolded
position
A3 Sandow 300mm 2
Sandow to pass
through the eyelets of
the sewed tarp
A3 NNV30 PVC caps 30x30 6To be assembled on
the sides and above
A3 BXN08030K Swivel wheel D80 with
brake thread M12 2To be assembled on the sides
A3 BXN08030X Swivel wheel D80 without
brake thread M12 2To be assembled on the sides
PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 BTBH0840 +
TTBD08
Screw BC M8x40 +
Locknuts BC M8 2 + 2 Use as an axis for the hinge
VISA PACKING DEPARTMENT DATE :
PACKING LIST
FOLDABLE MOBILE WALL
PRODUCT REF S28211 Index C UNIT