Solahart BLACK CHROME XII User manual

Solahart
BLACK CHROME XII
SOLAR WATER HEATER
OWNER’S MANUAL SUPPLEMENT
and
WARRANTY INFORMATION
MODELS
151, 181, 182, 221, 222, 302, 303, 443.
FOR SERVICE PLEASE CALL [phone]
Solahart Industries Pty Ltd ABN 45 064 945 848
Corporate Headquarters: 112 Pilbara Street, Welshpool, Western Australia 6106
Telephone International [phone]. Facsimile International [phone]
Email: [email protected]
Internet http://www.solahart.com.au
Important: - Please complete the Warranty Information Section inside and
return to Solahart Industries Pty Ltd Free Post address shown .

BLACK CHROME XII Owner’s Manual Supplement 2
33-4063 Revision C Issue Date: June 2003
INTRODUCTION
Congratulations on choosing your BLACK CHROME XII solar water heater. Your purchase
will provide you many years of trouble free hot water.
The BLACK CHROME XII has been developed and manufactured by a Solahart Industries
Pty Ltd using experience gained with fifty years of solar water heater production.
All over the world, the Solahart name is synonymous with quality in water heating. From
humble beginnings in the pioneering days of Western Australia, a reputation has been built
up over nearly a century.
In 1905, two enterprising plumbers formed the company known as S. W. Hart, a name that
was retained for over 70 years. Even in its early stages, S. W. Hart was involved in the
manufacture of metal products for water storage and water heating. Since 1953 S. W. Hart,
now Solahart Industries Pty Ltd has been Australia’s leading manufacturer of thermosyphon
solar hot water systems.
Solahart is the market leader in Australia and a dominant brand throughout the world. Our
network of distributors covers over 70 countries including Europe, USA, Africa and Asia. In
our home market of Australia we offer the widest range of thermosyphon solar water heater
products. The BLACK CHROME XII is a premium quality system offering maximum
performance and reliability.
It is with the above in mind that we at Solahart Industries Pty Ltd are confident that your
purchase of the BLACK CHROME XII solar water heater will reliably provide you with hot
water and is backed up with quality after sales service.
Thank You
Solahart Industries Pty Ltd
ABOUT THIS SUPPLEMENT
The Solahart BLACK CHROME XII offers a higher level of performance and reliability than other Solahart solar
water heaters. Consequently, this supplement highlights information that is specific to the major service, anode
replacement period and warranty for the BLACK CHROME XII.
Please complete the warranty form inside this supplement instead of the warranty form inside the main
Owner’s Manual.
All other information contained within the main Owner’s Manual is relevant to the BLACK CHROME XII system.

BLACK CHROME XII Owner’s Manual Supplement 3
33-4063 Revision C Issue Date: June 2003
MAINTENANCE
Major Service (usually Every Six Years)
This service should be performed at least every Six years.
1. Check closed circuit liquid level and pressure test the closed circuit.
2. Replace pressure/temperature operated relief valve
3. Flush cold water relief valve.
4. Where fitted check electric element for excessive calcium build up or corrosion. Replace if necessary.
5. Check unit generally, i.e. broken glass, excessive dust build-up, shading etc.
6. Carefully inspect all connections.
7. Flush out tank sediment build-up (if any).
8. Replace anode if necessary.
9. For units fitted with a Gas Booster refer to the Gas Booster Owner’s Manual for service instructions.
It is recommended that the major service be carried out by Solahart or your local Solahart Dealer.
Anode Replacement Period
Your Solahart tank is a cylinder lined with two coats of high quality ceramic material. Considering all metals
corrode in hot water, the sacrificial anode is a low cost item that is simple to replace and will protect the main
cylinder from corrosion. Bare metal tanks (eg. copper, stainless steel) generally do not have an anode and
therefore rely on natural defences which are often broken down by many domestic water supplies. Replacing the
anode is less expensive than replacing the complete tank.
In areas where the total dissolved solids (TDS) is 1000 ppm or less the sacrificial magnesium anode must be
changed at least every twelve years. More regular changes will be necessary where the water TDS is more than
1000 ppm. Water quality details should be obtained from the water authority where special water supplies are
used. Consult your local Solahart dealer for advice regarding anode replacement periods if the TDS in your area
is higher than 1000 ppm.
To replace the anode, the Solahart serviceman will do the following:
1. Turn off the electrical power or gas supply (as applicable).
2. Turn off the water supply.
3. Release excess water pressure at the pressure/temperature relief value by turning the valve top.
4. Remove the terminal cover plate or flue cowl (units fitted with gas booster).
5. Disconnect the earth wire from the anode nut.
6. Unscrew the hexagon nut located to the left of the electric element and withdraw the old anode.
7. Insert the new anode assembly into the cylinder.
8. Tighten the anode, reconnect earth cable, turn on the water supply, check that the anode nut joint is
watertight and refit the cover (or flue terminal). Open a hot water tap to dispel air from the tank, or at the
pressure/temperature operated relief value.
9. Turn on the electrical or gas supply (as applicable).
WARNING: Do not turn power on until the heater is filled with water or damage to the heating element will result.

BLACK CHROME XII Owner’s Manual Supplement 4
33-4063 Revision C Issue Date: June 2003
Important - Please Read This Warranty Information and Return
the Completed Installation Report to Solahart Industries Pty Ltd
Solahart BLACK CHROME XII
Worldwide Guarantee
Using the information contained in the Installation Report you have returned to Solahart Industries Pty Ltd,
Solahart will record on the customer database the serial number and location of your Solahart water heater.
The protection offered by the guarantee detailed below is in addition to all other non excludable rights and
remedies that the consumer has under the Trade Practices Act (in Australia) and similar state or territorial laws
that may apply.
This warranty applies to complete water heaters installed in a family dwelling only. A separate warranty policy
applies for water heaters installed in commercial and industrial applications or individual components.
The manufacturer (Solahart Industries Pty Ltd) guarantees the Solahart water heater against manufacturing
defects, faulty material and/or workmanship and leakage from corrosion upon the following terms.
Complete Water Heater
Twelve (12) years warranty on the Storage Cylinder and Collectors.
Plus
Six (6) years covering all parts and labour on the Tank and Collectors.
Conditions
The above is subject to an area within a 30-kilometre radius of the Solahart dealer from whom the unit was
purchased. Customers outside this area will be subject to freight and travelling charges incurred by the Solahart
dealer carrying out the work.
Items replaced under guarantee are only covered for the remaining term of the guarantee period applicable to
the original unit purchased.
A call out fee applies to service calls made outside normal Solahart business hours.
Exclusions
1. The manufacturer shall be under no obligation under this guarantee in the case of accident, Acts of God,
installation/repairs carried out by persons outside Solahart installation and maintenance instructions or
vandalism.
2. No responsibility is accepted for any consequential loss or damage caused by a defect.
3. Where the closed circuit is not filled with the Solahart approved heat transfer or antifreeze fluid in accordance
with instructions.
4. In the case of collapse of the inner cylinder due to an incorrect filling procedure.
5. Where the closed circuit has had water added that is not in accordance with the water quality specifications.
Recommendation
1. Statutory Authorities and Codes recommend that the pressure/temperature operated relief valve fitted to the
storage tank be operated at intervals of approximately six months.
2. Prior to the end of the twelve-year warranty you should contact your local Solahart dealer to arrange for a
service on the system to ensure continued efficient operation.

Black Chrome XII Installation Report
Dear Customer,
To register your warranty please ensure the following information is correct then sign and return to our
Solahart Industries Pty Ltd freepost address:
Solahart Industries Pty Ltd.
Reply Paid Perth 354,
WELSHPOOL
Western Australia 6106
WARRANTY: For details and conditions of warranty see Page4 of this manual supplement
Please complete all details below
Owner: Name .........................................................................
Address .........................................................................
.........................................................................
Telephone Number .........................................................................
Installation: Address (if not as above) .........................................................................
.........................................................................
Telephone Number .........................................................................
Dealer: Name .........................................................................
Address .........................................................................
.........................................................................
Installer: Name ……………………………………………………..
Installers Installation Check List Please Tick
Closed Circuit fittings tightened and commissioning stickers fitted?
Closed Circuit pressure tested and checked for leakage
Closed Circuit filled with potable water and Hartgard mixture
Heat Dissipation Kit fitted
System orientation (degree’s from north / south)
System mounting type (tile roof, metal roof, “A” frame etc.)
Booster type (electric, gas, not fitted)
Installer Certification: I certify that this installation has been installed and tested in
accordance with Solahart Industries Pty Ltd specifications
Signed: ........................................................................................
Print Name: ........................................................................................
Date: .......................................................................................
System Identification and Closed Circuit Commissioning Point Locations
Tank Serial No
Collector Serial No’s 1) 2) 3)
Service’s Due Dates 1) 2) 3)
Customer Acceptance: I have read the warranty policy of this BLACK CHROME XII system and the
installer has presented me with the Owner’s Manual.
Signed: ........................................................................................
Print Name: ........................................................................................
Date: .......................................................................................
Comments:
White Copy: Head Office Yellow Copy: Dealer Blue Copy: Sales Office Green Copy: Manual