Solax X-Cabinet User manual

285 mm
210 mm
描述
材料
料号
单位 页次
技术要求：
1.材质80g铜版纸，彩色打印，正反打印
2.未注尺寸公差按 +- 1.5mm
3.图面、字体印刷清晰、无毛边、不起边、油墨不脱落
4.字体颜色为PANTONE Black C，无边框，底色为白色
5.符合RoHS要求
Description
浙江艾罗电源有限公司
SolaX Power Co.,Ltd.
X-Cabinet说明书 英文 solax
614.00211.00
Q-OP-SC-01-02 V1.0
X-Cabinet
Qu ick Inst allat ion Gui de
Packing List
X-Cabinet is a
battery which
Open the box Installation of battery
01 02
II
Introducti on
I
III V
Mounting
IV
Please choose a suitable fixed method according to local condition.
设计
审核
核准
浙江艾罗电源有限公司
罗 西 2017/4/20
朱娴红 2017/4/20
朱娴红 2017/4/20
REV.Description
0.0
首次发行
罗 西 2017/4/20
描述
料号
单位
614.00211.00
页次
X-Cabinet说明书 英文 solax
铜版纸
REV.
0.0
增加固定螺钉
罗 西 2017/5/5

Installation
V
Mounting
IV
KST Terminal X1
KST Cold Terminal
X2 L Stand X4
Please choose a suitable fixed method according to local condition.
5.1 Put the battery in the cabinet
Battery
Fixed battery board
X-Cabinet
Quick Installation Guide
Packing List
Check that if there is any distortion or impaired during transportation.
X-Cabinet is a battery box which is
compatible with SolaX hybrid inverter(SK-
SU/BMU). Configured with X-Cabinet,
customers just need to connect several
wires between inverter and X-Cabinet /
battery.
Unscrew screws and open the cabinet as follow.
Open the box
01 02
II
Introduction
I
III
Expansion tubes
X 8 Screw X 8
Expansion screws
X 8
The second method:
Fixed outside the cabinet
Cabinet
The first method:
Fixed in the cabinet
Screw X1

5.2 Wire connection
03 04
614.00211.00
Use the diagonal plier to trip 15mm
of insulation from one side of the
wire as below.
Insert this end of wire into KST cold
terminal and .crimp pin contact
15mm
3AWG
15mm
3AWG
5.2.1 Inner Wire connection
Step1. Plug the battery wire into the
battery power port. The color of positive
wire is orange, the negative wire is black.
Step2. Plug the communication cable into the
RS485/CANS port of battery.
The left one port is RS485/CANS port
RJ45 PIN definition
③Insert the wire into the KST terminal, and plug
into the port of X-Cabinet, use the screw to fix the
terminal. Connect the another side of the wire into
the inverter according to the definition of BMS
port.
Battery power wire
②
Pin 1
Function
X
2
GND
3
X
4
CANH
5
X
76
X
8
CANL
X
5.2.2 Outer Wire connection
Insert the cable provided by the inverter into the port of X-cabinet. Insert the other side of
the cable into the BMS port of inverter, and install the cover of the cabinet.
Battery power
Battery communication
TEMP
Overview for all connection between X-Cabinet and SK-SU inverter
Cable provided by inverter
Breaker
Open the lid, the breaker
is in this place.
Step1. Power wire connection
Step2. Cable connection
Operation of X-cabinet
VI
Second: x KST terminal by the screw.
First: Insert KST terminal into the
port of the X-Cabinet.