Solax X1 Series User manual

描述
材料
料号
单位 页次
设计
审核
核准
技术要求：
1.材质为80g双胶纸，所有页彩色打印，正反打印
2.未注尺寸公差按 +- 1.5mm
3.图面、字体印刷清晰、无毛边、不起边、油墨不脱落
4.字体颜色为PANTONE Black C，无边框，底色为白色
5.符合RoHS要求
浙江艾罗电源有限公司
双胶纸
正反打印,需折叠出货
一折 二折
REV.REV.
Description Description
1.0
2.0
描述
料号
单位 页次
浙江艾罗电源有限公司
SolaX Power Co.,Ltd.
V0.1首次发行
V0.2增加外部接地，升级料号
朱伟 2016/5/13
朱伟 2016/6/20
X1-Mini系列 快速安装指南（英文）
612.00118.01
X1-Mini系列 快速安装指南（英文）
612.00118.01
朱伟 2016/6/20
朱娴红 2016/6/20
朱娴红 2016/6/20
297mm
210mm

Quick Installation Guide
—— X1 Series 1.1kw-2.0kw
IPacking List
Male DC unit×1Female DC unit×1
Product manual×1Quick installation guide×1Warranty card×1
AC terminal×3
Inverter ×1
Positive DC pin contact ×1
Male DC unit×1 Female DC unit×1
Negative DC pin contact ×1
Bracket ×1
Plug and Play Pocket WiFi×1
II Inverter Installation
- Mark the position of the two holes.
- Screw the expansion screws. - Match the inverter with the bracket.
- Screw the cross recessed screw on the right side.
- Drill holes with driller.
- Depth: at least 50mm.
- Tighten the expansion tubes.
205.5mm
III
12 AWG
PV Connection
Cable size: 12 AWG -Align the two halves connectors.
positive DC
pin contact
negative DC
pin contact
clamp contact
nut male plug
female plug
tight nut
cable
trip length:
6.0mm
Expansion tube×2
Expansion screw ×2
Cross recessed screw×1
Ring terminal ×1
(optional)

IV
Cable size: 10 AWG - Open AC lid
trip length
52.5mm
12mm
55mm
outer jacket
AC terminal
L
N
PE
clamp contact
- Insert the terminals into the corresponding holes and fasten them.
cable core section through AC lid
LNPE
AC Connection
614.00118.01
V
- Open the WiFi lid on the bottom of the inverter.
- Open the communication lid on the bottom of the inverter as below.
- Insert the USB flash drive with program into the “USB” port on the bottom.
- Plug the Pocket WiFi (from Solax) into the port named
“WiFi” on inverter, and tighten the four screws as below.
- Screw the ground screw with allen wrench shown as follow.
- Overview for connection.
WiFi Connection(optional)
VI Usb for Updating
VII
Overview for Connection
USB
Warning!
Be sure this ground wire must be connected !