Solax X-Hybrid User manual

X-Hybrid
BATTERY STORAGE INVERTERS FROM SOLAX
WiFi User Manual
USE IT, STORE IT FEED IT TO THE GRID
TAKE CONTROL OF THE ENERGY YOU GENERATE

1
WiFi User Manual
1 Connect with user’s home Wi-Fi network
1.1 Connect with Data Acquisition System
(1) Confirm the inverter is working correctly.
(2) Use a computer/tablelet to search for the WIFI signal originating from the inverter.
The SSID of this WIFI signal will be called: SolaX_xxxxxx('xxxxxx' being the last six
characters of the device mac address) as shown in Figure1:
Figure 1, Searching for the Data Acquisition System Signal
(3) Connect the WIFI signal with the SSID 'SolaX_xxxxxx'. Once connected, the
computer/tablet will display connectivity as shown in Figure 2;confirming that the device
(laptop or tablet) has direct connectivity with the inverter.

Figure 3, Data Acquisition System Login Interface
Figure 2, Connected with Data Acquisition System
1.2 Set Network Parameters
(1) Input the IP address ‘11.11.11.1’ into the address bar of an internet browser (IE, Firefox or
Chrome) on the device you are currently using to connect to the inverter. When prompted
for a user name and password, enter ‘admin’ in both instances, as shown in Figure3.
(2) Click ‘Yes’ and you will be taken to the basic configuration page as shown in Figure 4. At
this point you should enter the SSID of the home WIFI network to which you need to
connect and enter the password of the home WIFI network as the “key”. Set the security
2
mode as auto. Click “reset” and the setting will take effect.

(Note: Users need to make a copy of the SN number for the future use in login the X -Monitoring
system)
Figure 4, Basic settings page
Figure 5, check the WIFI signal strength
(Note: a signal strength of 50% or more is recommended).
Now that connectivity is established, you can disconnect from the W IFI network
‘SolaX_xxxxxx’ on the laptop/tablet you are using and reconnect to the home WIFI network
ready for stage 2 of the process.
3
(3) Click the "Find AP" at the right side of SSID as shown in figure 4.There Will be an
Scan page, it will search for the signal of the WIFI router around, and there will be
a list as figure 5. The SSID is the WIFI router’s SSID, signal means the strength
of the router. 100% means the router has a good signal, 0% means the router
has no signal here.

2.1 User Registration and Sign-in
(1)Input the address http://al.lewei50.com/ in the address bar on your web browser. A sign-in
interface will appear(as shown in Figure 6). Click ‘sign- up’, and a registration window(shown
in Figure 7) will be displayed. Complete the following sections: user name, password, ,email
address and the SN number (refer to the SN number collected in the Data Acquisition System
settings page); then click ‘sign-up’ and the registration is complete.
Figure 6, SolaX X -Monitoring login interface
Figure 7, user sign -up interface
4
2. User Guide for SolaX X-Monitoring System

(3) Users can see the current running parameters when they select their inverter listed under
'My Sites'.
2.2 Edit and add new site and inverter
(1) Once logged in the user is able to edit the site. To do this, click the 'Edit' tab, and the
page shown in Figure 10 will appear. Here the user can edit the site information
changing information such as name, location, system size and time zone.
(2) Sign-in the X-monitoring system use the username and password you set.
When signing into the X-monitoring System, 'My Site' is based on the SN number of
user's inverter.
Figure 9, Visit 'My Site'
5
Figure 8, My site

Figure 10 , Edit station information
(2)If a user needs to monitor more than one inverter on the site, they add new sites by using the
‘+New Site’ function in the menu bar. A new page will be loaded, which is similar to the editing
page, the key difference being that the SN number of the new WIFI is needs to be put into
the blank bar at the bottom of the page, as shown in Figure 11.
Figure 11, Add New Inverter
(3)If the user needs to monitor more than one inverters within one site, he can use the‘Inverters’
function in the menu bar, a page (Figure 12) listing inverters will appear. Users can edit and
add new inverters here.
Figure 12, Inverter list
6

Click ‘Add New Inverter’, and input the relevant information of the new inverter in the blank
fields as shown in Figure 13, then click save to finish.
Figure 13, Adding New Inverter
2.3 User Information Setting
Users can edit user information by using the ‘Settings’ function in the menu.
Figure 14, User Information Setting
2.4 Sites Management for User
The SolaX X- Monitoring System provides various site management functions.
（1）Real-time display
The Real-time display function provides the current performance of running parameters of the
system for performance monitoring. Click the ‘Real-time Display’ tab as demonstrated in
Figure 15.
7

Figure 15, Real-time display of site
（2） Alarm Record
Figure 16, Alarm Record
（3）History Record
Figure 17, Changing Curve
8

（
4）Report Analysise
5）
6） Overview of the Batteries
In the 'Batteries' tab, users can get an overview of the battery performance. On the left hand
Figure 18, Report Analysis
Auto-sending Settings
In the 'Auto-sending Settings' page, users can choose the 'Auto-sending' frequency (daily,
weekly and monthly) of the error logs, as shown in Figure 19.
Figure 19, Auto-sending Settings
9

side of the page is the charging level of the batteries. The middle section of the page shows
the historical voltage, current and charge level data; and on the right hand side the current
battery status (sees Figure 20).
Figure 20, Overview for batteries
（7） Battery History
In the ‘Batteries’ tab, click ‘History Record’, here users can find the historical battery data, as
shown in Figure 21.
Figure 21, History Record for batteries
10

（
8） Alarm Record for Batteries
In the 'Battery' tab, click 'Alarm Record'. Users can check the battery alarm record, as shown
in Figure 22.
Figure 22, Alarm Record for Battery
11

SolaX Power Co,. Ltd.
Room 220, West Buliding A, National University Science and
Technology Park of Zhejiang University 525, Xixi Rd,
Hangzhou, Zhejiang Province, China, 310007
Tel: [phone]
E-Mail: [e-mail]
614.00028.00