SOLE LR-OL User manual

11
THE CONNECTED IRRIGATION EXPERT
LR-OL
QUICK
INSTALLATION
GUIDE

12
The LR-OL is a Bluetooth®/ LoRaTM controller that centralizes the control
of its garden equipment (lighng, swimming pool, fountain) from a single
applicaon. Simple and praccal, it is the ideal soluon to ingeniously
illuminate your garden.
The LR-OL can be controlled by bluetooth or paired with an LR-MB10
or LR-MB30 (Wi-Fi/LoRa relay) or an LR-BST.
PRESENTATION
DOWNLOADING
1. On your smartphone and/or tablet,
go to the «App Store» or «Google Play».
2. Search «MySOLEM» in the search bar.
Étape 1
3. Download MySOLEM applicaon.
MySOLEM
4. Once installed, acvate the Bluetooth® on your smartphone and/or tablet.
CREATE AN ACCOUNT
To benet from all LR-OL advantages, please create a MySOLEM account.
1. Launch MySOLEM app from your smartphone and/or tablet.
2. Go to «My account» by typing on icon.
3. Follow the steps described on the app.
GET INSTALL

13
PAIRING
1. Remove the lower hatch from the LR-OL to reveal the terminal block.
3. Start the MySOLEM app from your smartphone and/or tablet.
Step 2
2. Plug in the 220V/24Vac power supply provided.
5. Choose the LR-OL from the list of available controllers.
7. Follow the steps described on the app to complete combinaon of your
LR-OL.
6. (Oponal) Set a name and security key for your controller and press the
«Validate» buon.
Note: To idenfy your LR-OL among the nearby controllers available, refer to
the «Default name» present on its label on the back of the product.
4. Press the «Add a Controller» buon or the «+» buon.
Security key
The security key allows to protect your controller. You can dene it during the
step 6 of the «ASSOCIATION» or access to further informaon by clicking on
the icon at the top right of your screen.

14
LR-MB PAIRING
Step 3
To opmize the LoRaTM connecon between the LR-MB10/30 and the LR-OL,
test the LoRa connecon by following steps 6 and 7. It is advisable to combine
all your LR-OL near the LR-MB before installing them separately.
2. Tap the icon at the top right of your screen to access
product informaon.
4. Select the LR-MB10/30 relay you want to use.
7. Press the buon to start the test.
3. Tap «Remote Access».
6. Go back to «Remote access» screen of LR-OL, previously seen.
1. Select the previously installed LR-OL controller.
5. Validate the operaon by pressing the «Send» buon
or at the boom of your screen.
Once the combinaon is complete, you can test the connecon between your
LR-MB10/30 and your LR-OL:
Note:
- The «Established Connecon» message indicates that the connecon is
reliable.
- The message «No established connecon» indicates that it is necessary
bring your LR-OL closer to the LR-MB10/30 or inversely.

15
ASSOCIATION LR-BST
1. On the app, select your LR-BST, and switch to pairing mode
3. Tap the icon at the top right of your screen to access product informa-
on.
4. Press «Remote Access».
2. Select the previously installed LR-OL controller.
5. Select the original LR-BST from the list.
7. Click on the buon to start the test.
6. Go back to «Remote access» screen of LR-OL, previously seen.
Once the combinaon is complete, you can test the connecon between your
LR-BST and your LR-OL

16
INSTALLATION
Step 4
Several types of installaon are possible for your LR-OL.
Choose the example that you think is best for your situaon.
The LR-OL product has 4 relays (250V 16A), which can connect up to 3500 W
on a single line.
To avoid overheang and deterioraon of the device, it is not necessary to
exceed 4000 W distributed over the 4 relays.
The use of LED bulbs requires plugging in a power contactor (Schema No.3)
from a power of 150W LED bulbs.
1. A single line used with switch
You can parallel a back-and-forth switch with the programmer’s relay. Only
constraint, when the switch back and forth will be in the on posion no acon
will be possible with the programmer.
Bleu
Interrupteur
Rouge / Marron
Switch
Blue
Red/Brown

17
2. Simple installaon without power contactor
Bleu
Pompe
< 400W
Pompe
< 400W
< 400W
Terre
Rouge
Pompe > 400W
A1
3. Simple installaon with power contactor
When there is a greater need for power, including starng (e.g., a pool pump
with a power of more than 400W), you can inteleave a power contactor or
water heater delay between the controller and your device.
Make the connecon by following the 3 steps described below.
Pump Pump
Pump

18
What are the features required for the Bluetooth® product to work?
Android 4.3 and top phones and tablets equipped with Bluetooth Smart 4.0
and higher. Apple iPhone or iPad with iOS 9.0.
How can I resume the associaon or start-up procedure from scratch?
To resume an inializaon procedure, simply unplug and reconnect the power
supply.
If my device is no longer powered, do I lose the programs?
No, they’re never lost, they’re saved in a memory.
How do I reset my device’s programming?
Open the app, enter the product, then open the sengs and select «Delete
Programs and Duraons.»
FAQ
INFORMATION ABOUT THE STATE OF LED
Green LED: Normal operaon
Flashing green LED: An acve line is underway (the number of ashes
corresponds to the number of the acvated line).
Fixed Red LED: The product is in boot mode for 2 minutes
Flashing Red LED 2 mes: The programmer has lost the me, reconnect to
re-synchronize it.
LED o: The product is not powered.

19
This symbol indicates that the power supply has a thermal protecon of 130oC.
~
The «CE» symbol indicates that this device complies with European standards
on safety, health, the environment and user protecon. Devices with the
symbol «CE» are intended for sale in Europe.
This symbol indicates that these types of electrical and electronic devices must
be disposed of separately in European countries. Don’t throw this appliance
away with your household garbage. Please use the collecon and recycling
points available in your country when you no longer need this device.
This symbol indicates that power voltage is an alternave voltage.
This symbol indicates that the power supply is intended to be used only indoors.
This symbol indicates that the power supply has a Class 2 type dual insulaon.
GENERAL INFORMATION
READ THE FOLLOWING SAFETY INSTRUCTIONS CAREFULLY BEFORE
INSTALLING OR USING THE LR-OL. BE SURE TO STRICTLY FOLLOW THE
PRECAUTIONS OF USE.
The LR-OL must be installed indoors or under cover.
Install your product so that the socket outlet base is close to the material.
The socket outlet is a cung device, if there is a problem, it must be easily
accessible at all mes. Make sure that the power outlet on which your power
transformer is connected provides protecon against over-intensies and
short circuit 16A circuit breakers. Use only the power supply provided with the
product:
INPUT: 230V ~ 50Hz OUTPUT: 24V ~ 0.75A

20
TECHNICAL FEATURES
DIMENSIONS
Width: 11 cm
Height: 14,3 cm
Depth: 4,2 cm
INSTALLATION
Indoors or under cover.
Connecon: 4 relay 250VAC 16A . 3500W Max per relay.
Temperature of use: from -20C to 60C
Qualifying humidity: 90% (relave humidity).
POWER SUPPLY :
transformer : 230V ~ 50Hz / OUTPUT : 24V ~ 0.75A 50Hz
FEATURES
Bluetooth® Smart 4.0 Low Energy [2400-2483.5]Mhz
LoRaTM radio communicaon
Permanent backup of program
Backing up the internal clock in case of a break < 30s