Eaton CGLine+ CGVision Series Operating and maintenance instructions

CGLine+ Web Controller
Quick Installation Manual
Kurzanleitung
Guide d’installation rapide
Target group: Skilled electricians
Zielgruppe: Elektrofachkraft
Public cible : Électriciens conrmés
CGLine+ Web Touchscreen Controller
CGL+ CGVision Touchscreen S/Controller
CGL+ CGVision Touchscreen G/Controller
English ............................ 2
Deutsch ........................18
Français ........................34

Introduction
2Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
1 Introduction
This short instruction manual is a quick commissioning procedure of the CGLine+ Web
Touchscreen Controller. A complete Installation and Operating Instruction is download-
able from the website of the CGLine+ web controller, see page 6 or on the desktop of
the tablet.
1.1 Description
1.1.1 Stand-alone system
CGL+ CGVision Touchscreen S/Controller 40071361083
••Configuration and visualisation of the integrated CGLine+ Web-Controller as stand-
alone solution.
Safety notes
CAUTION
••The CGLine+ Web Touchscreen
Controller must be operated in undam-
aged and functional state.
••When carrying out maintenance work
with the device the device must be de-
energised.
••When carrying out device maintenance,
observe national safety and accident
prevention regulations and the safety
notes in the operating instructions
below designated with .
Conformity to standards
Compliant with: EN 62368.
Developed, manufactured and tested
according to DIN EN ISO 9001.
GB
CGL+CGVisionTouchscreenS/Controller
Line 1
1 2 3 200
Line 2
Line 3
Line 4
1 2 3 200
1 2 3 200
1 2 3 200
Wifi feature of the embedded
tablet is not used for this
application and disabled in this
equipment.
Enabling this function causes the
loss of the certification.

Introduction
3Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
1.1.2 Centralised supervision
CGLine+ Web Touchscreen Controller 40071361056
••Visualisation of the integrated CGLine+ Web-Controller and any external
connected CGLine+ Web-Controller via the integrated web browser on the
touchscreen.
••An optional CGVision visualisation software allows a centralised monitoring and con-
trol of up to 32 CGLine+ Web Touchscreen Controller or CGLine+ Web-Controller.
GB
Ethernet
TCP / IP
CGLine+ Web Touchscreen
Controller :
CGLine+Web-Controller
CGLine+Bus
CGLine+WebTouchscreenController
Line1 1 2 3 200
Line2
Line3
Line4
Fully centralised
conguration and
monitoring of all CGLine+
Web Touchscreen Controller
CGL+ CGVision Touchscreen G/Controller 40071361084
••Configuration and visualisation of the integrated CGLine+ Web-Controller and a
group of up to 9 external via ethernet connected CGLine+ Web-Controller.
Line 1
Line2
Line3
Line4
Ethernet
TCP / IP
CGLine+WebTouchscreenController
CGLine+ CGVision
TouchscreenG/Controller
1 2 3 200
CGLine+WebTouchscreenController
Line 1 1 2 3 200
Line 2
Line 3
Line 4
Line 1
Line 2
Line 3
Line 4
Optional:
1 2 3 200
1 2 3 200
1 2 3 200
1 2 3 200
Line 1
Line2
Line3
Line4
1 2 3 100
1 2 3 100
1 2 3 100
1 2 3 100
CGLine+Web-Controller
CGLine+Bus
Line 1
Line2
Line3
Line4
Line 1
Line2
Line3
Line4
1 2 3 200
1 2 3 200
1 2 3 200
1 2 3 100
1 2 3 100
1 2 3 100
1 2 3 100

Introduction
4Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
GB
1.1.3 Features
General
••Visualisation of up to 800 CGLine+ self-contained luminaires
••10.1-inch colour touchscreen display for an easy handling of the system
••Automatic luminaire search function
••Automatic function and duration test for up to 8 free selectable test groups of
CGLine+ luminaires
••Two free programmable digital inputs and two relay outputs
••Full control commands of each selectable luminaire
••Logbook function for a period of at least 4 years
CGLine+ Web Touchscreen Controller
••Visualisation of any no. of external networked CGLine+ Web-Controller via
integrated web browser
••Embedded building layout
••Optional central CGVision PC allows a centralised monitoring of up to 32
CGLine+ Web Touchscreen Controller or CGLine+ Web-Controller
CGL+ CGVision Touchscreen S/Controller
••Stand-alone system for up to 800 CGLine+ self-contained luminaires
••Full control, monitoring and configuration of each luminaire via integrated
CGVision Lite visualisation software
CGL+ CGVision Touchscreen G/Controller
••Group visualisation of up to 9 external networked CGLine+ Web-Controller
••Full control, monitoring and configuration of each luminaire via integrated
CGVision Lite visualisation software for up to 10 CGLine+ controller

Powering the CGLine+ Web Touchscreen controller
5Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
1.1.4 Technical data
Table 1. Technical data
Power supply (typ.) 230 V AC, 50/60 Hz
Power consumption < 12 W standby
< 38 W full load
Connection terminals max. 2.5 mm² flexible
Permissible ambient temperature 0 ° to 35 °C
Storage temperature 0 ° to 35 °C
Protection rating IP 20
Dimensions 345 × 397 × 111 mm
Housing type Plastic,wall-mountedhousing
2 Powering the CGLine+ Web Touchscreen controller
Power up the Touchscreen controller. The web controller turns on.
To switch the tablet on:
••If the tablet is off, press the ON/OFF button during 3 seconds using a screw-
driver.
••If the tablet is in standby mode, press the Windows button.
GB
345
397
57
111
ON/OFF button
Windows button

Operation of the visualisation
6Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
3 Operation of the visualisation
ote:N This quick start manual describes only the basic operation of the software.
On the desktop of the Touchscreen panel is a link to a PDF file with a complete
description of the software.
3.1 CGLine+ Web Touchscreen Controller
Start Internet Explorer by using the shortcut in the bottom access bar.
The start screen of the CGLine+ web controller now opens.
A login is necessary. Two accounts are available:
User Admin Password EATON
User User Password GUEST
All documentation are pre-loaded in the following directory of the Windows system:
Documents > Touchscreen controller > Manual
The web server manual is available from the web server.
All other manuals are available from the CGLine+ Web Touchscreen Controller.
GB

Operation of the visualisation
7Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
3.2 CGL+ CGVision Touchscreen S/Controller
Start the visualisation software by double-clicking on the CGLine Plus
Controller icon on the desktop of the touchscreen:
A message of the user account control appears. Click on YES.
3.2.1 Start image – CGLine+ Controller Software
The following background image is shown after the start-up process of the
CGLine+ Controller software:
IMPORTANT
If the settings of the touch panel need to be modified,
tap on the lower edge to open the Windows task bar.
All functions are presented in detail in the following sections. A summary of
functions is given here:
ote:N All operations are protected with a PIN number. Without typing in a PIN
number, the status can only be displayed.
Select the British flag to access the system settings, e.g. to modify the language
of operation.
The status of the CGLine+ Web Controller is shown on the left side. Tap on the
button under the status message to access the internal display levels of the
Controller.
The middle three display windows show the status (summary messages) of all
connected self-contained luminaires according to DIN VDE 0100-560 (Displays
GB

Operation of the visualisation
8Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
GB
560.6.14). These include:
••Operation = normal operation;
••battery operation, e.g. in case of power failure; and
••fault summary, e.g. a battery failure of a luminaire.
Click on the coloured area to access a detailed presentation of the messages.
All connected self-contained luminaires can be blocked simultaneously on the
right side.
A function test of all luminaires is started, the logbook is displayed and further
settings are made in the lower blue control area.
Tap on the red button to close the software application if necessary.
3.2.2 PIN authentication for operation
For configuration control operations, e.g. to block luminaires, a prompt window is
shown with a virtual numeric keypad to type in a PIN number:
The Administrator PIN and User PIN are set ex
works. The Administrator has full access rights. The
User only has limited rights, e.g. to start a function
test. The rights required for performing an operation
are shown in the PIN prompt window.
Administrator
9876 followed by OK
User
0000 followed by OK
ote:N The PIN numbers of the
Administrator and User can be changed in the
settings. See next page.

Operation of the visualisation
9Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
GB
3.2.3 Basic software settings
Tap on the British flag button to access the settings menu of the software.
Language:
Select one of the 19 languages of
operation in the Language menu; the
language is modified without restarting
the programme.
General:
- Type in a project name of max.
80digits.
- Change the User and
Administrator PIN number.
IMPORTANT
Memorise the new PIN or write it
down.
- Change the background colour.

Operation of the visualisation
10 Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com
GB
CGLine+:
Select whether the blocking button
on the base window performs the
“Block” or “Rest mode” (for France
only) operation.
Maintained mode ON - the CGLine+
luminaires can be turned on/off if the
L terminal on the luminaire is bridged
with the L line.
3.2.4 Further functions and
display operations in the base
window
Status display of the Controller
ClickonthebuttontoopentheCGLine+Web-Controllerdevicewindow.Seenext
page.
TheBlockbuttonisusedtoblockallconnectedluminaires(PINauthentication)
topreventacompletedischarge,e.g.incaseofapowerfailureduringoperation
downtimes.
Close the programme (PIN authentication)
Start FT
Click on the button to start a function test of all connected self-contained
luminaires.
(User/Admin PIN authentication)