Soltech VIOS User manual

6.8W / 800LM
4.0Ah / 3.7V
SMD 2835 X 60PCS
4.4 Wp, Mono-crystalline Silicon
3 Different Modes
120° ≤ 19.7ft
39.3 ft
IP65
3 YEARS
35,000 hrs
≤ 13.1 ft
Solar Light X 1, Accessory Bag X 1,
User Manual X 1, Measure Card X1
SPECIFICATIONS
02
POWER / LUMEN
LED
LI-ION BATTERY
SOLAR PANEL
WORKING MODE
DETECTION ANGLE / AREA
VISIBLE DISTANCE
IP DEGREE
WARRANTY
LIFESPAN
INSTALLATION HEIGHT
PACKING
011
INTRODUCTION
1. This is a solar powered lamp, please install it in a
location where it can get enough sunshine.
2. Please note the duration of the light depends on sun
intake & weather.
3. The lamp will automatically turn on at dusk.
4. Built-in IC with over-charge, over-discharge, and
over-voltage protection.
Warning
1. The lamp is equipped with internal batteries. Non-professionals
please do not disassemble the lamp.
2. Please do not dispose the battery in household garbage to
avoid explosion.
WATERPROOF SUPER
BRIGHT
CORDLESS DUSK TO
DOWN SENSOR
MOTION
SENSOR
LOW
COST
Copyright©2021–2022 SOLTECH LLC, All Rights Reserved.
SOLTECH LLC reserves the right to update all product data sheets at any time. Consult
SOLTECH marketing specialists for publication updates at www.soltechlighting.com
SOLTECH offers
advanced LED
technology that
is eco-friendly
and utilizes
clean energy.
VIOS
1460 Park Avenue.
Emeryville CA 94608 USA
www.soltechlighting.com
Please read and follow all instructions to operate. Save this
manual for future reference.
SOLAR LED WALL LIGHT
6.8W 800LM
4,000K

INSTALLATION
03
04
1. Please use the measure card to correctly
position the hole drillings then drill 3 holes
of 6mm
2. Fix 3 expansion plugs into the holes
3. Fix 3 screws into the expansion plugs leaving
spare space to hang & secure the light.
4. Hang the notch onto the screws and fasten
the lamp
5. Press the power button on the back to
program the operating mode
MODE A
Automatically turn on at dusk (< 30 Lux) and remains
at 20% brightness for 5 hours then turns off.
Measure Card X 1
Power Button
Expansion
Plugs X 3
Light X 1
Screws X 3
6mm
Please press the power button to program an
operating mode:
Press 1 time for MODE A
Press 2 times for MODE B
Press 3 times for MODE C
Press 4 times to TURN OFF
OPERATING
MODES
MODE B
Automatically turns on to full brightness (800LM)
when motion is detected in the range ≤19.7ft and then
dims to 3% brightness in 20 seconds of no motion.
MODE C
Automatically turns on to full brightness (800LM)
when motion is detected in the range ≤19.7ft and
then turns off in 30 seconds of no motion.
120° 120°
120° 120°