V-TAC VT-ST15 User manual

Please read and follow all instructions to operate.
Save this manual for future reference.
15W/1600LM
1. Prepare lamp, accessories and tools well firstly.
2. Insert the L-shaped bracket into the socket. (Figure 1)
3. Use allen wrench to tighten the cap screws. (Figure 2)
4. According to demanded installation height, drill 2 holes of φ8mm with a
depth of at least 60mm on the wall, and fix the expansion screws into the
holes. Then use a wrench to fix the light fixture. (Figure 3)
1. Prepare lamp, accessories and tools well firstly.
2. Open the cover of lamp socket. (Figure 1)
4. Set up the lamp onto the lamp-post. (Figure 3)
5. Adjust the lamp parallelly and lock the lamp-post fixture. (Figure 4)
3. Fix the lamp-post fixture onto the lamp socket (do not lock first). (Figure 2)
Installation A: Wall Mounted
Installation B: Lamp-post Mounted
1. The lamp is equipped with an internal battery pack, which is replaceable.
If any need, please contact seller for correct new battery pack.
2. Non-professionals please do not disassemble the lamp.
3. Please do not dispose the battery with household garbage to avoid explosion.
132
Installation
Height: 3-5m
52mm
Depth of
Holing: 60mm
1 2 3
Ă40-Ă50mm
4
Installation
Warning!
Model：VT-ST15

Solar Powered
Light on/off Automatically
IP65 Waterproof
Cordless
ZERO Electricity Cost
PlR Inductive
Battery Replaceable
Long Lasting
Multi Functional
Safe
Power/Lumen 15W / 1600LM
LEDs SMD2835*40PCS
Li-ion Battery Pack 18650/7.4V/10800mAh, replaceable
Solar Panel 9.5Wp, Poly Crystalline Silicon
* This lamp can be used as wall light and street light, multi-funcational.
* You can easily install it in garden, garage, pathway, street, entrance, courtyard,
square etc.
8548/8549SKU
Notice
1. This is a solar powered lamp, please install it in a location where can
get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. Built-in intelligent IC with over-charge, over-discharge and over-voltage
protection.
4. The lamp will light up automatically at dusk.
IP Degree IP65 waterproof
Beam Angle 140X70-TPIII
Detection Angle/Area 120°/ 3-8Mtrs
Dimension 413*232*58MM
Lifespan 35,000hrs
Installation Height 3-5Mtr
Smart button:
First 5Hrs lighting:
Automatically turns on to full brightness
(1600lm) when motion is detected in the
range ≤ 8mtrs and then turns to 3%
brightness in 20 seconds of no motion.
This lamp is with auto-adjusting working
mode, you only need to press the
button once, it will work permanently.
After 5Hrs lighting or When battery capacity below 30%:
Automatically turns on to full brightness(1600lm) when motion is detected in the range ≤ 8mtrs
and then turns to 3% brightness in 20 seconds of no motion, then turns off after 5 minutes.
ON/OFF
5 minutes later
Applications
Working Mode
Specification
Features