Sonic Alert SBA475ss User manual

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The Sonic Boom Alarm Clock Model SBA475ss is warranted against
manufacturing defects in materials and workmanship for (1) year
from the date of purchase. Within this period Sonic Alert will repair
or replace at our option the without charge for parts and
labor. Simply send the (postpaid) and a copy of your sales
slip as proof of purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
SBA475ss
SBA475ss
093-HK008-017
SONIC ALERT'S 1 YEAR LIMITED WARRANTY SONIC ALERT'S 1 YEAR LIMITED WARRANTY
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
1-800-566-3210 V/TTY
www.SonicAlert.com
Sonic Boom Alarm Clock & Bed Shaker
Model SBA475ss
Made in China
Sonic Alert 1050 East Maple Rd, Troy, MI 48083
1-800-566-3210 V/TTY
www.SonicAlert.com
.
.
OPERATION INSTRUCTIONS
IMPORTANT- Please read these instructions carefully before use and retain for future reference. See operating
instructions on back.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before connecting to
mains make sure that the requirements specified on the apparatus corresponds to the available power supply i.e.
AC 120V 60Hz.
GENERAL DATA
Power: Consumption: 8w, 120v / 60 Hz (Adaptor AC ~9V 750 MA)
UL listed transformer (Underwriters Laboratories)
The exclamation mark
within the triangle is a
warning sign alerting you
of important instructions
accompanying the
product.
The Lightning flash and
arrowhead within the
triangle is a warning sign
alerting you of dangerous
voltage inside the
product.
CAUTION:
TO REDUCE THE RISK
OF ELECTRICAL
SHOCK, DO NOT
REMOVE THE COVER
(OR BACK) FROM THE
PRODUCT. NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO YOUR
SONIC ALERT DEALER.
This device complies with part 15 of the Federal Communications Commission Rules.
Operation is subject to the condition that this device does not cause harmful interference.
Note: The manufacturer is not responsible for any radio or TV interference cause by
unauthorized modifications to this equipment. Such modification could void the
user's authority to operate the equipment.
190.00 mm
280.00 mm
MODEL: SBA475SS (CR008) 093-HK008-017
Night Light Section: amended some wordings

12
11
TONE
VOL
VIB
AC 9V
7
4
5
6
3
2
1
INSTRUCTIONS
ANALOG ALARM CLOCK WITH BED VIBRATOR
MODEL SBA475SS
Features shown on diagrams above:
1) Function Switch 7) Battery Compartment
2) Back light Hi/Lo Dimmer 8) Time Set Knob
3) Snooze Button 9) Alarm Set Knob
4) Volume Control 10) Back light On/Off
5) Flashing Light Display 11) AC Power Input
6) Tone Control 12) Vibrator Input
AC-9V Power Input -
Attach the AC power supply input to the back of clock at AC-9V IN (11) next to the VIBRATOR
input, smaller input of the two.
NOTE: IMPORTANT: do not confuse"AC POWER INPUT"(11) with the "VIBRATOR INPUT"(12)
Setting the correct time-
1) Turn the Time Set Knob (8) clockwise until hour and minute hands show desired time.
Setting the alarm time-
1) Turn the Alarm Knob (9) clockwise until alarm hand is at the desired time.
Alarm-
To enable the alarm function, slide the "FUNCTION SWITCH" (1) up to the position that you desire
to wake to, you can choose "VIB" for bed shaker, "BUZZ" for sound, and "VIB/BUZZ" for both.
NOTE: whichever function you choose to wake to, will be the same function for both alarms. When
the alarm sounds, the Flashing Light Display (4) and the back light will flash until the alarm
is stopped.
Snooze Operation-
SNOOZE button (3) - press after alarm has sounded. The alarm will be turned off for 4 minutes for
extra sleep. The alarm will come back again after 4 minutes.
Shutting Off Alarm-
Alarm can be shut off by sliding the function switch (1) to off position.
Volume Control-
To adjust the "VOLUME", turn the volume wheel (4) located on right side of the clock.
Tone Control-
To adjust the "TONE", turn the tone wheel (6) located on right side of the clock to the desired tone
sound.
Bed Shaker / Vibrator- Figure B
1) Attach the bed shaker jack to the side of clock at VIBRATOR input (12).
2) To turn on vibrator slide FUNCTION switch (1) to VIB or VIB/BUZZ position.
3) Place vibrator under mattress or pillow.
Night Light -
The blue back light can be turned on or off by using switch (10) located at the back of the clock.
The brightness of the back light can be adjusted by using the dimmer switch (2) at the side of the
clock.
Battery Backup-
To use battery backup, you can install a 1.5-volt AA size alkaline battery at the bottom of the clock
located under the battery cover (7). Note the back light, vibrator and sound will not operate during
power failure, your alarm and time setting will be saved when power is restored.
10
9
8
HIGH
L
O
OFF
Figure B
Night Light Section: amended some wordings