Sonoff SNZB-04 User manual

SNZB-04
User manual V 1.0
Wireless Door/Window Sensor

eWeLin
k
eWeLink
.SONOFF TECHNOLOGIES CO., LTD English
The device can be operated intelligently via working with the SONOFF
.ZigBee Bridge to communicate with other devices
The device can work with other gateways supporting ZigBee 3.0
the final wireless protocol. Detailed information is in accordance with
.product
Operation instruction
.1 Download APP
.2Pull out the battery insulation sheet
>

.SONOFF TECHNOLOGIES CO., LTD English
<
.3 Add sub-devices
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want to connect, and tap
r 5so“Add” to add a sub-device. Then long press reset button on the device f
until the LED indicator flashes three times, which means the device has
.entered the pairing mode, and be patient until pairing completes
ZBB ridg
Added:0
If the addition failed, move the sub-device closer to the Bridge and try
.again
Specifications
Model
Battery model
Wireless connection
Working temperature
Working humidity
Material
Dimension
SNZB-04
(ZigBee (IEEE 802.15.4
℃40~℃10-
(10-90%RH (non-condensing
PC
(CR2032(3V
Transmitter: 47x27x13.5mm
Magnet: 32x15.6x13mm
10mm>
Installation gap
Quiescent current
Emission current
2uA>
15mA>
.No child device,please add
Add

.SONOFF TECHNOLOGIES CO., LTD English
Product Introduction
Features
SNZB-04 is a ZigBee low-energy wireless door/window sensor that makes you
teknow the opening/closing status of door and window by separating the magn
trfrom the transmitter. Connect it with the Bridge and you can create a sma
.scene to trigger other devices
Low battery notification
Low-energy Smart scene
LED indicator
Align the mark lines
Transmitter
Magnet
Reset button

SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same
.time
Power the Bridge on, access the Bridge page in the eWeLink APP, and tap
patient “Add”. Then set the sub-device to be paired to the pairing mode, and be
.until the pairing completes
<
ZBBridge
Delete sub-devices
Long press the reset button on the sub-device for 5s until the LED indicator
flashes three times. In this case, the sub-device is deleted from the Bridge
.successfully
.Users can delete sub-devices directly from the sub-device page on APP
.SONOFF TECHNOLOGIES CO., LTD English
Added:0
.No child device , please add
Add
Connecting
Keep the device close
enoupg to the hub
25s
Add Device
Looking for device
Found devices
3

Installation methods
.SONOFF TECHNOLOGIES CO., LTD English
.1.Tear off the protective film of the 3M adhesive
.2 Try to align the mark line on the magnet with that on the transmitter during
.installation
.3.Install them in the opening and closing area separately
Make sure the installation gap is less than 10mm when the door or the
.window is closed
<10mm
. The device weight is less than 1 kg
.The installation height of less than 2 m is recommended

Application
:Note
●.Do not install outside the door/window
● Do not install in the unstable position or in the place exposed to
.rain or moisture
●.Do not install near wiring or magnetic object
DoorWindow
.SONOFF TECHNOLOGIES CO., LTD English