Sonoff SNZB-P User manual

1
S N Z B - P ( EN )
SNZB-03P is a low-power Zigbee 3.0 protocol-based motion sensor that utilizes infrared
sensing technology to detect moving objects in real-time within its environment. It supports
smart scenes linking with other smart devices, making it easy to achieve functions like automatic
lighting when someone enters a room and turning off lights when the area is vacant, perfect for
hallways and corridors. It can also be used for security purposes such as detecting unauthorized
entry. It can trigger a camera to record a video, activate a sound alarm through the gateway, and
send app notifications to alert you, among other capabilities.
Introduction
Zigbee Motion Sensor
User Manual V1.0
Motion Detection Quick Detection
Light sensing 3-year battery life

2
*The functional characteristics depend on the functionality of Zigbee gateway.
*The equipment is only suitable for mounting at heights ≤ 2 m.
Instruction of LED indicator status
① Motion sensor
② Button ③ Magnetic base
④ LED indicator (Red)
LED indicator status Status instruction
Flash slowly for 180 seconds First-time power on/press and hold button for 5s to
enter pairing mode
Keep on for 3s and then keep
off
Paired successfully
Exit flashing slowly and keep off
Distribution failure/timeout
Flash once quickly
Not added to the gateway, and short press the button
Flash twice quickly
Added to the gateway and online, and short press the
button
Flash slowly for 30 seconds Abnormal communication

3
Please download the " eWeLink " App from Google Play Store or Apple App Store .
Specification
Download the eWeLink App & Add SONOFF Zigbee
gateway.
Model SNZB-03P
MCU EFR32MG22
Input CR2477 （ 3V ）
Colour White
Product dimension
44x44x65mm
Net weight 54g
Casing materials
PC
Wireless connection Zigbee 3.0 IEEE802.15.4
Pairing time 180s
Communication distance Indoor environment 30m
Applicable place Indoor
Detection angle 110°
Detection distance 6m
Working temperature -10°C ~ 60°C
Working humidity 5-95%RH, non-condensing
Working height Less than 5000m
Certification CE/FCC/ISED/RoHS
Executive standard EN IEC 62368-1

4
Scan QR Code to Add Device
Rotate to open the sensor Use a coin or another tool to unscrew the
battery cover
Take out the battery insulation sheet to power
on the device
Enter "scan QR code" mode

5
Matched gateways
Scan the QR code on the device Select “ Add Device ”
Long press the button for 5 seconds The LED indicator flashes slowly for 180s
Select Zigbee gateway Wait until the addition is done

6
SONOFF ZBBridge, ZBBridge-P, NSPanel PRO, AIBridge, ZBDongel-P, ZBDongel-E
Third-party compatible gateway models:
Amazon Gateway Model: Echo Plus 2nd, Echo Show 2nd, Echo 4th Gen
SmartThings Gateway Model: SmartThings hub V3, AeoTec Smart Home Hub V3
Other gateways supporting ZigBee3.0 wireless protocol. Detailed information is in accordance
with the final product.
Install the device in the desired place, then press the Pairing button on the device. The LED
indicator flashes twice means the device and the device under the same Zigbee network (the
router device or hub) are in the effective communication distance.
Matched gateways
Effective Communication Distance Verification
Installation
1. Place on the desktop 2. Attached to the metal surface with the
magnetic base

7
The sensor has a detection range of approximately 6 meters and a detection angle of around 110
degrees.
Detection zone
3. Stick to the wall with 3M adhesive of the
base
4. Base screws fixed to the wall

8
FCC compliance statement
1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance of 20 cm between the
radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC Warning
ISED Notice

9
ISED Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada ’ s licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with Canadian ICES ‐ 003(B).
This device complies with RSS ‐ 247 of Industry Canada. Operation is subject to the condition that
this device does not cause harmful interference.
L ’ émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d ’ Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L ’ exploitation est autorisée aux deux conditions suivantes :
(1)L ’ appareil ne doit pas produire de brouillage;
(2)L ’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d ’ en compromettre le fonctionnement.
Cet appareil numérique de la Classe B conforme à la norme NMB ‐ 003(B) du Canada.
Cet appareil est conforme à la norme RSS ‐ 247 d'Industrie Canada. Le fonctionnement est
soumis à la condition que cet appareil ne provoque pas d'interférences nuisibles.
ISED Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance of 20 cm between the
radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Cet équipement est conforme aux limites d ’ exposition aux rayonnements de la ISED établies
pour unenvironnement non contrôé.
Cet équipement doit être installé et fonctionner à au moins 20cm de distance d ’ un radiateur ou
de votre corps.
Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne
ou un autre émetteur.

10
Under normal use of condition, this equipment should be kept a separation distance of at least
20 cm between the antenna and the body of the user.
Dans des conditions normales d ’ utilisation, cet équipement doit être maintenu à une distance
d ’ au moins 20cm entre l ’ antenne et le corps de l ’ utilisateur.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you
should protect human health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human health. Please contact the
installer or local authorities for more information about the location as well as the conditions of
such collection points.
Hereby, Shenzhen Sonoff Technologies Co., Ltd declares that the radio equipment type SNZB-
03P is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address:
https://sonoff.tech/compliance/
Operation frequency Range: RF Output Power:
Zigbee: 2405-2480MHz Zigbee: ≤ 10dBm
SAR Warning
WEEE Warning
EU Declaration of Conformity
For CE frequency

11
Do not ingest battery, Chemical Burn Hazard.
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away
from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the
case of some lithium battery types).
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure result in an explosion or the leakage of
flammable liquid or gas.
Scatola Manuale
Borsa Borsa
PAP 21 PAP 22 CPE 7 LDPE 7
Carta Carta Plastica Plastica
RACCOLTA DIFFERENZIATA
Verifica le disposizioni del tuo Comune.
Separa le componenti e conferiscile in modo corretto.

12
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
ZIP code: 518000 Service email: [e-mail]
Website: sonoff.tech Made in China