Sony Ericsson K800i Installation instructions

Sony Ericsson K800i disassembly
Tools required: Torx 6 screwdriver, Size 0 Phillips screwdriver
Remove the two
screws at the bottom of
the phone with the torx
6 screwdriver. Remove
the other two screws
with the Phillips
screwdriver
Lift the antenna cover
away from the phone. It
unclips at the top of the
phone and needs a
little force to remove

Remove the two torx 6
screws at the top of the
phone which are
revealed after
removing the antenna
cover
Pull the front cover
away at each side so
that it releases

The phone will now be
in two parts, as below
Wiggle and pull the
keypad assembly up,
away from the phone
and it will pop off

The screen assembly
is held on by two clips
at each side of the
phone, indicated
below. Unclip them to
remove the screen
assembly
Unclip the ribbon which
hold the screen
assembly to the circuit
board of the phone. It
attaches like a plug
and socket