Sony CDX-H910UI Marketing Specifications... User manual

SONY:
4-127-574-11 (1)
FM/AM
Compact Disc Player
Operating Instructions -----.II.1II
Mode d'emploi IGII
Manual de instrucciones _
Bedienungsanleitung ~
Gebruiksaanwijzing ____
To cancel the demonstration (DEMO) display, see page 6.
Pour annuler la demonstration (DEMO), reportez-vous ala page 6.
Para cancelar la pantalla de demostraci6n (DEMO), consulte la pagina 6.
Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 6 nacho
Om de demonstratie (DEMO) te annuleren, zie pagina 6.
CDX-H910UI
[Q]D~@
DIGITALAUDIO
I TEXT I
ra Madefor
@J iPod
©2008 Sony Corporation

•
2
For installation and connections, see the
supplied installation/connections manual.
Owner's Record
The model and serial numbers are located on the bottom
of the unit.
Record the serial number in the spaces provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. CDX-H910UI
Serial No. _
Warning
This equipment has been tested and found to
comply with the limits for aClass Bdigital
device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This
equipment
generates, uses, and can radiate radio frequency
energy and,
if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there
is no guarantee that interference
will not
occur in aparticular installation. If this
equipment does
cause harmful interference to
radio
or television reception, which can be
determined by turning the equipment
off and on,
the
user is encouraged to try to correct the
interference by one
or more of the following
measures:
-Reorient
or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
-Consult the dealer
or an experienced radiolTV
technician for help.
You are cautioned that any changes
or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
CAUTION
The use of optical instruments with this product
will increase
eye hazard.
For the state of california, USA only
Perchlorate Material -special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate
CLASS 1
LASER PRODUCT
This label is located on the bottom of the
chassis.
Notice for customers: the following
information is only applicable to
equipment sold
in countries applying
EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
Japan.
The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service
or guarantee matters
please refer to the addresses given
in separate
service
or guarantee documents.
:a
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
• European countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall not
be treated
as household waste. Instead
it shall be handed over to the
applicable collection point for the recycling
of electrical
and electronic equipment.
By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling
of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling
of this product, please contact
your local Civic Office, your household waste disposal
service or the shop where you purchased the product.
Applicable accessory: Remote commander

)t
Disposal of waste batteries
(applicable in the European Union
and other European countries with
• separate collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product
shal1 not be
treated as household waste. By ensuring these batteries are
disposed
of correctly, you will help prevent potentially
negative consequences for the environment and human
health which could otherwise be caused
by inappropriate
waste handling
of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require apermanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery wil1
be treated properly, hand over the product at end-of-Iife to
the applicable collection point for the recycling
of
electrical and electronic equipment.
For all other batteries, please view the section on how to
remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling
of waste batteries.
For more detailed information about recycling
of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
H3' Radio®
'!IREADY
The "HD Radio Ready" logo indicates that this
product will control aSony
HD Radio™ tuner
(sold separately).
For HD Radio™ tuner operation, please refer to
the
HD Radio™tuner Operating Instructions.
HD Radio™ and the HD Radio Ready logo are
proprietary trademarks
of iBiquity Digital Corp.
~
The "SAT Radio Ready"
SAT logo indicates that this
RADIO product will control a
REA 0 Y satellite radio tuner module
(sold separately). Please see
your nearest
authorized Sony
dealer for details on the
satellite radio tuner module.
"SAT Radio," "SAT Radio Ready," the SAT
Radio and SAT Radio Ready logos and all
related marks are trademarks
of Sirius Satellite
Radio Inc. and
XM Satellite Radio Inc.
ZAPPIN is atrademark of Sony Corporation.
Windows Media, and the
_. Plays
_.
-w-'-in-do-w-s-t Windows logo are trademarks
™ Media™ or registered trademarks of
Microsoft Corporation in the
United States and/or other countries.
iPod is atrademark
of Apple Inc., registered in
the U.S. and other countries.
iPhone is atrademark
of Apple Inc.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer liS and Thomson.
This product
is protected by certain intellectual
property rights
of Microsoft Corporation. Use or
distribution
of such technology outside of this
product
is prohibited without alicense from
Microsoft or
an authorized Microsoft subsidiary.
Content providers are using the digital rights
management technology for Windows Media
contained
in this device ("WM-DRM") to protect
the integrity
of their content ("Secure Content") so
that their intellectual property, including copyright,
in such content is not misappropriated.
This device uses WM-DRM software
to play
Secure Content ("WM-DRM Software"). If the
..
security of the WM-DRM Software in this device
has been compromised, owners of Secure Content
("Secure Content Owners") may request that
Microsoft revoke the WM-DRM Software's right
to acquire new licenses to copy, display and/or
play Secure Content. Revocation does not alter the
WM-DRM Software's ability to play unprotected
content. Alist
of revoked WM-DRM Software is
sent to your device whenever you download a
license for Secure Content from the Internet or
from a
Pc. Microsoft may, in conjunction with
such license, also download revocation lists onto
your device on behalf of Secure Content Owners.
Warning if your boat's ignition has no
ACC position
Be sure to set the Auto Off function (page 18).
The unit will shut
off completely and
automatically in the set time after the unit is
turned off, which prevents battery drain.
If you do not set the Auto Off function, press
and hold
(OFF) until the display disappears
each time you turn the ignition off.
3

•
4
Table of Contents
Getting Started
Playable discs on this unit 6
Resetting the unit. 6
Canceling the
DEMO mode 6
Preparing the
card remote commander 7
Setting the clock 7
Location of controls and basic
operations
Main unit 8
Card remote commander RM-X 151 10
Searching for atrack 11
Searching atrack by name
-
Quick-BrowZer II
Searching atrack by listening to track passages
-ZAPPINTM II
Radio
Storing and receiving stations 12
Storing automatically -BTM 12
Storing manually 12
Receiving the stored stations 12
Tuning automatically 12
CD
Playing adisc 12
Display items
13
Repeat and shuffle play 13
USB devices
Playing back a USB device 13
Display items. .................... .. 14
Repeat and shuffle play ............. .. 14
iPod
Playing back iPod 15
Display items. .................... .. 16
Setting the play mode. . . . . . . . . . . . . . . . . .. 16
Repeat and shuffle play ............. .. 16
Operating an iPod directly
-Passenger
control. ................. .. 16
Other functions
Changing the sound settings 17
Adjusting the sound characteristics 17
Customizing the equalizer curve
-EQ3 17
Adjusting setup items - SET .......... .. 18
Memory backup ..................... .. 18
Using optional equipment. 19
CD changer. ...................... .. 19
Marine remote commander
RM-X60MIXIIM 19
Rotary commander RM-X4S 20
Auxiliary audio equipment. 20
Additional Information
Precautions ........................... 21
Notes on discs 21
Playback order of MP3IWMA/ AAC
files 21
About iPod 21
Maintenance 22
Specifications
22
Troubleshooting 23
Error displays/Messages 25

Support site
If you have any questions or for the latest support information on this
product, please visit the web site below:
For customers in the U.S.A. and Canada:
http://esupport.sony.com
http://www.xplodsony.com/
For customers in Europe:
http://support.sony-europe.com
For customers in Latin America:
http://esupport.sony.com/ES/LAI
For customers in Pan Asia:
http://www.sony-asia.com/section/support
http://www.sony-asia.com/caraudio/
Provides information on:
•Models and manufacturers of compatible digital audio players
•Supported MP3IWMAJAAC files -
5

•
6
About water resistancy
This unit is designed for use in amarine
environment. To protect the unit from water spray,
waves, rain, moisture, ultraviolet rays, etc., the unit
has undergone the following tests to ensure
reliability and functionality (Front panel only):
•Water resistant front panel - IPx5 certified
•Salt fog resistant -Tested under ASTM B
117
•Conformal coated circuit board
•
UV resistant -Tested under ASTM GI54
Notes
•Be sure to close the front panel
to maintain water
resistant performance, except when inserting/
ejecting adisc.
•Do not allow water to contact the unit except the
front panel.
•Do notuse this unit in the following places:
-places where the unit maybe subject to high water
pressure, hot springs
or bathtubs, etc.
-underwater.
Getting Started
Playable discs on this unit
This unit can play CD-DA (also containing CD
TEXT) and CD-RfCD-RW (MP3IWMA/AAC
files (page 21)).
Type of discs Label
on the disc
CD-DA
cQJO~~
cQJOO~~
DIGITAL AUDIO
DIGITAL AUDID
';;y.li·ml'
IReWritablel
[Q]OO~~
[Q]O§@
MP3 DIGITAL
AUDID
DIGITAL AUDID
R.IJfjm
IReWritablel
WMA
AAC
cQJO§@
[Q]m~~
m·flJ.
IReWritablel
Resetting the unit
Before operating the unit for the first time, or
after replacing the boat's battery or changing the
connections,
you must reset the unit.
Open the front panel (page 12) and press the
RESET button (page 8) with apointed object,
such as aball-point pen.
Note
Pressing the RESETbutton will erase the clocksetting
and some stored contents.
Canceling the DEMO mode
You can cancel the demonstration display which
appears during turning off.
1Press and hold (SELECT/ENTER ).
The setup display appears.
2Press (SELECT/ENTER) repeatedly until
"DEMO" appears.
3Rotate the control dial to select
"DEMO-OFF."
4Press and hold (SELECT/ENTER).
The setup is complete and the display returns
to normal play/reception mode.

Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 22.
Setting the clock
The clock uses a12-hour digital indication.
1Press and hold (SELECT/ENTER).
The setup display appears.
2Press (SELECT/ENTER) repeatedly until
"CLOCK-ADJ" appears.
3Press (SEEK) +.
The hour indication flashes.
4Rotate the control dial to set the hour
and minute.
To move the digital indication, press (SEEK)
-/+.
5Press (SELECT/ENTER).
The setup is complete and the clock starts.
To display the clock, press (DSPL). Press
( DSPL) again to return to the previous display.
-
7

9
_,.,~ ..... ¥_._._vcJ ,.
17
1
Front panel opened
Main unit
Location of controls and basic operations

This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
[j] BTM/CAT*1 button page 12
To start the BTM function (press and hold).
[g] OFF button
To power off; stop the source.
~ Q(BROWSE) button page 11
To enter the Quick-BrowZer mode.
@] Control dial
To adjust volume; select setup items.
[§] Number buttons
CDIUSB:
G)/(D: ALBUM -/+ (during MP3IWMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
®: REP page 13, 14, 16
CD: SHUF page 13, 14, 16
®:DM+
Improves digitally compressed sound,
such
as MP3.
To activate the DM+ function, set
"ON."
To cancel, set "OFF."
@:PAUSE
To pause playback. To cancel, press
agam.
Radio:
To receive stored stations (press); store
stations (press and hold).
lID OPEN switch page 12
[l] Display window
[ID DSPL (display)/SCRL (scroll) button
page 13,14,16
To change display items (press); scroll the
display item (press and hold).
[ill EQ3 (equalizer) button page 17
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
[1Q] Receptor for the card remote
commander
[1] ~ (BACK)/MODE button page 11, 12,
16
Press to: Return to the previous display/
select the radio band (FM/AM)*2/selectthe
play mode
of iPod.
Press and hold to: Enter/cancel the passenger
control.
II2l SEEK -/+ buttons
CDIUSB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about Isecond and hold); reverse/fast-
forward atrack (press and hold).
Radio:
To tune in stations automatically (press); find
astation manually (press and hold).
~ SELECT/ENTER button
Press to: Enter sound setting/apply asetting.
Press and hold to: Enter menu.
[H] SOURCE button
To power on; change the source (Radio/CD/
USB/AUX)*2.
II§] Frequency select switch (located on the
bottom
of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
[1§] ZAP button page 11
To enter ZAPPINTM mode.
I11l RESET button page 6
~ Disc slot page 12
To insert the disc.
~ ~ (eject) button page 12
To eject the disc.
continue to next page --+

~ t (+)/. (-) buttons
To control CDIUSB, the same as CD/CD
(ALBUM -/+) on the unit.
Setup, sound setting, etc., can be operated by
t•.
fB SeRl (scroll) button
To scroll the display item.
PI;] Number buttons
To receive stored stations (press); store
stations (press and hold).
*IWhen the SAT tuner is connected.
*2
In the case of aCO changer; Ho Radio tuner or
SAT tunerbeing connected; when (SOURCE) is
pressed, the connected device ("Ho,"
'XM" or "SR")
will appearin the display, depending on which
device
is connected. Furthermore, if ( MODE) is
pressed, you can switch the changer; Ho Radio
tuner band
or SAT tuner band.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or adisc is
inserted to activate the unit first.
MODE button page 12, 16
Press to: Select the radio band (FM/AM)*2/
select the play mode
of iPod.
Press and hold to: Enter/cancel the passenger
control.
~
I
I _
~ """)'~; ':-/ "".-+-- ....
~DSPL --" ... ' .. __ .. _ .. -. SCRL'"''
i <ill) .. ~
I I-+-"'~;:
l~"~
I
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 7).
PI .. (~)/ .. (~) buttons
To control radio/CD/USB, the same as
(SEEK) -/+ on the unit.
Setup, sound setting, etc., can be operated by
.....
f)J DSPl (display) button page 13, 14, 16
To change display items.
Pi VOL (volume) +/- button
To adjust volume.
All (attenuate) button
To attenuate the sound. To cancel, press
agam.
g) SEl (select) button
The same as the SELECTIENTER button on
the unit.
Card remote commander
RM-X151

Searching for a track
Searching atrack by name
-Quick-BrowZer
You can search for atrack in a CD or USB device
easily by category.
Searching atrack by listening to
track passages -
ZAPPINTM
While playing back short track passages in aCD
or USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track
in shuffle or shuffle repeat mode.
Q(BROWSE) Control dial
SELECT/ENTER ZAP
~ (BACK) SELECT/ENTER
1Press Q(BROWSE).
The unit enters the Quick-BrowZer mode,
and the list
of search categories appears.
2Rotate the control dial to select the
desired search category, then press
(SELECT/ENTER) to confirm.
3Repeat step 2until the desired track is
selected.
Playback starts.
To return to the previous display
Press ~ (BACK).
To exit the Quick-BrowZer mode
Press Q(BROWSE).
Note
When entering the Quick-BrowZer mode, the repeat!
shuffle setting
is canceled.
1Press (ZAP) during playback.
After "ZAPPIN" appears in the display,
playback starts from apassage
of the next
track.
The passage
is played for the set time, then a
click sounds and the next passage starts.
Track
'----t-----I
The part of each track to
playback
in ZAPPIN mode.
2Press (SELECT/ENTER) or (ZAP) when
atrack you want to listen
is played
back.
The track that you select returns to normal
play mode from the beginning.
To search atrack by ZAPPIN mode again,
repeat steps Iand
2.
Tips
•
You can select the playback time from about6
secondsl9 secondsl30seconds (page 18).
You
cannot select the passage of the track to playback.
•Press
(SEEK) -1+ or (DIm (ALBUM -1+) in
ZAPPIN mode
to skip atrack oralbum.
-
11

Radio
Storing and receiving stations
Caution
When tuning in stations while boating, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically -BTM
1Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM I, FM2,
FM3, AM I
or AM2.
2Press and hold (BTM) until "BTM"
flashes.
The unit stores stations in order of frequency
on the number buttons.
Abeep sounds when the setting is stored.
Storing manually
1While receiving the station that you
want to store, press and hold a
number button (CD to
®) until
_"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store anotherstation on the same number
button, the previously storedstation will
be replaced.
Receiving the stored stations
1Select the band, then press anumber
button (CD to
®).
Tuning automatically
1Select the band, then press (SEEK) -1+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station
is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold ( SEEK) -/+ to locate the
approximate frequency, then press (SEEK) -/+
repeatedly to fine adjust to the desired frequency
(manual tuning).
12
For details on selecting a CD changer, see
page
19.
Playing a disc
1Slide the OPEN switch in the direction
of the arrow.
2Open the front panel.
3Insert the disc (label side up).
4Close the front panel.
Playback starts automatically.
Notes
•Do not put anything on the inner surface of the front
panel.
•Be sure
to close the front panel during operation.
Ejecting the disc
1Slide the OPEN switch and open the
front panel.
2 Press~.
The disc is ejected.
3Close the front panel.

Display items
"Source
QTrack name*1, Disc/artist name*l, Artist
name*', Album number*2, Album name*1,
Track number/Elapsed playing time, Clock
*1 The information of a CD TEXT, MP3IWMAlAAC is
displayed.
*2 Album numberis displayed only when the album is
changed.
To change display items Q, press ( DSPL).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings.
Repeat and shuffle play
1During playback, press G) (REP) or
m(SHUF) repeatedly until the
desired setting appears.
USB devices
I
For details on the compatibility of your USB
device, visit the support site.
Support site
For customers in the U.S.A. and Canada:
http://esupport.sony.com
http://www.xplodsony.com/
For customers in Europe:
http://support.sony-europe.com
For customers in Latin America:
http://esupport.sony.com/ES/LA/
For customers in Pan Asia:
http://www.sony-asia.com/section/support
http://www.sony-asia.com/caraudio/
•MSC (Mass Storage Class) and MTP (Media
Transfer Protocol) type USB devices compliant
with the USB standard can be used.
•Corresponding codec
is MP3 (.mp3), WMA
(.wma) and AAC (.m4a).
•Backup
of data in aUSB device is
recommended.
Note
Connect the USB device afterstarting the engine.
Depending on the USB device, malfunction
or damage _
may occur
if it is connected before starting the engine.
Select
eTRACK
eALBUM*
SHUF ALBUM*
SHUF DISC
To play
track repeatedly.
album repeatedly.
album
in random order.
disc in random order.
Playing back a USB device
1Remove the USB cap from the USB
connector and connect the USB
device to the USB connector.
*When an MP3IWMAlAAC is played.
To return to normal play mode, select "e OFF"
or "SHUF OFF."
Playback starts.
If aUSB device is already connected, to start
playback, press
(SOURCE) repeatedly until
"USB" appears.
Press
(OFF) to stop playback.
continue to next page --+ 13

Repeat and shuffle play
1During playback, press ®(REP) or
CD (SHUF) repeatedly until the
desired setting appears.
Removing the USB device
1Stop the USB device playback.
2
Remove the USB device.
If you remove your USB device during
playback, data in the
USB device may be
damaged.
Notes
•Do not use USB devices so large
or heavy that they
may fall down due
to vibration, or cause aloose
connection.
•This unit cannot recognize USB devices
via aUSB
hub.
Select
<:; TRACK
<:; ALBUM
SHUF ALBUM
SHUF DEVICE
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
Display items
"Source
°Track name, Artist name, Album number*,
Album name, Track numberlElapsed playing
time, Clock
.. *Album number is displayed only when the album is
changed.
To change display items 0, press (DSPL).
Notes
•Displayed items will differ, depending on the USB
device, recorded format
and settings. Fordetails,
visit the supportsite.
•The maximum number
of displayable data is as
follows.
-folders (albums): 128
-files (tracks) per folder: 500
•Do not leave aUSB device
in amooredboat, as
malfunction may result.
•It may take time for playback to begin, depending on
the amount
of recorded data.
•DRM (Digital Rights Management) files may not be
played.
•During playback
or fast-forward/reverse of aVBR
(Variable Bit Rate) MP3IWMAlAAC
file, elapsed
playing time maynot display accurately.
•Playback
of the following MP3IWMAlAAC files is not
supported.
-lossless compression
-copyright-protected
14
After 3seconds, the setting is complete.
To return to normal play mode, select
"<:; OFF"
or "SHUF OFF. "

iPod
For details on the compatibility of your iPod, see
"About iPod" on page
21 or visit the support site.
In these Operating Instructions, "iPod" is used as
ageneral reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text
or illustrations.
Support site
For customers in the U.S.A. and Canada:
http://esupport.sony.com
http://www.xplodsony.com/
For customers in Europe:
http://support.sony-europe.com
For customers in Latin America:
http://esupport.sony.com/ES/LAI
For customers in Pan Asia:
http://www.sony-asia.com/section/support
http://www.sony-asia.com/caraudio/
~Iaying back i~od
Before connecting the iPod, turn down the
volume
of the unit.
1Remove the USB cap from the USB
connector and connect the iPod to the
USB connector via the dock connector
to USB cable.
The iPod will tum on automatically, and the
display will appear on the iPod screen as
below.*
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press
(SOURCE) repeatedly until
"USB" appears. ("IPD" appears in the display
when iPod is recognized.)
* If the iPod was played back in the passengercontrol
last time, this will notappear.
2Press (MODE) to select the play mode.
The mode changes as follows:
RESUMING --+ ALBUM --+ TRACK --+
PODCAST* --+ GENRE --+ PLAYLIST
--+ ARTIST
*May notappear depending on iPod setting.
3Adjust the volume.
Press (OFF) to stop playback.
Removing the iPod
1Stop the iPod playback.
2Remove the iPod.
Caution for iPhone
When you connect an iPhone via
USB, telephone
volume is controlled
by iPhone itself. In order to avoid
sudden loud soundafteracall, do not increase the
volume on the unit during atelephone call.
Note
This unit cannot recognize iPod
via aUSB hub.
~s ..
• We recommend the RC-1001P USB cable (not
supplied)
to connect the dock connector.
•When the ignition key is turned to the ACCposition,
and the unit is on, the iPod will be recharged.
• If the iPod is disconnected during playback, "NO
DE V" appears in the display of the unit.
Resume mode
When the iPod is connected to the dock
connector, the mode
of this unit changes to
resume mode and playback starts in the mode set
by the iPod.
In resume mode, the following buttons do not
function.
- ® (REP)
- 8) (SHUF)
15

Repeat and shuffle play
1During playback, press ®(REP) or
m(SHUF) repeatedly until the
desired setting appears.
After 3seconds, the setting is complete.
To return to normal play mode,
select" c; OFF"
or "SHUF OFF."
-
Display items
oSource
eTrack name, Artist name, Album name, Track
number/Elapsed playing time, Clock
To change display items e, press (DSPL).
Tip
When album/podcastlgenre/artistlplaylist is changed,
its item number appears momentarily
Note
Some letters stored in iPod may not be displayed
correctly
Setting the play mode
1During playback, press (MODE).
The mode changes as follows:
ALBUM -- TRACK -- PODCAST* --
GENRE -- PLAYLIST -- ARTIST
*May not appeardepending on iPod setting.
Select
c; TRACK
c; ALBUM
c; PODCAST
c; ARTIST
c; PLAY LIST
c; GENRE
SHUF ALBUM
SHUF PODCAST
SHUF ARTIST
SHUF PLAYLIST
SHUF GENRE
SHUF DEVICE
To play
track repeatedly.
album repeatedly.
podcast repeatedly.
artist repeatedly.
playlist repeatedly.
genre repeatedly.
album
in random order.
podcast
in random order.
artist
in random order.
playlist
in random order.
genre
in random order.
device in random order.
Skipping albums, podcasts, genres,
playlists and artists
Operating an iPod directly
- Passenger control
16
To
Skip
Skip
continuously
Press
(D/m (ALBUM -/+)
[press once for each]
(D/m (ALBUM-/+)
[hold to desired point]
You can operate an iPod connected to the dock
connector directly.
1During playback, press and hold
(MODE).
"MODE IPD" appears and you will be able to
operate the iPod directly.
To change the display items
Press (DSPL).
The display items change as follows:
Track name
-- Artist name -- Album name --
MODE IPD -- Clock
To exit the passenger control
Press and hold (MODE).
Then "MODE AUD" will appear and the play
mode will change to "RESUMING."
Notes
•The volume can be adjusted only
by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.

Other functions
Changing the sound settings
Adjusting the sound
characteristics
1Press (SELECT/ENTER) repeatedly until
the desired item appears.
2Rotate the control dial to adjust the
selected item.
3Press ~ (BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set (follow the page
reference for details):
DSO (Dynamic Soundstage Organizer)
Creates amore
ambient sound field.
To select the
DSO mode: "I," "2," "3" or "OFF."
The larger the number, the more enhanced the
effect.
LOW*l, MID*l, HI*1 (page 17)
BAL (Balance)
Adjusts the sound
balance between the left and
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB (Subwoofer volume)
Adjusts the
subwoofer volume.
AUX (AUX level)*2
Adjusts the volume level for each
connected
auxiliary equipment: "+ 18 dB" - "0 dB" - "-8
dB."
This setting negates the need to adjust the
volume level between sources.
*IWhen EQ3 is activated.
*2 When
AUX source is activated.
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1Select asource, then press (EQ3)
repeatedly to select "CUSTOM."
2Press (SELECT/ENTER) repeatedly until
"LOW," "MID" or "HI" appears.
3Rotate the control dial to adjust the
selected item.
The volume level is adjustable in IdB steps,
from
-10 dB to +10 dB.
-:- 5d]
Repeat steps 2and 3to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold
(SELECT/ENTER) before the
setting is complete.
4Press ~ (BACK).
The setting is complete and the display ..
returns to normal play/reception mode.
Tip
Other equalizer types are also adjustable.
17

•
Adjusting setup items - SET
1Press and hold (SELECT/ENTER).
The setup display appears.
2Press (SELECT/ENTER) repeatedly until
the desired item appears.
3Rotate the control dial to select the
setting (example "ON" or "OFF").
4Press and hold (SELECT/ENTER).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 7)
BEEP
Activates the beep sound: "ON," "OFF."
AUX-A*1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF"
A.OFF (Auto Off)
Shuts
off automatically after adesired time
when the unit
is turned off: "NO," "30S
(seconds)," "30M (minutes),"
"60M (minutes)."
DEMO (Demonstration)
Activates the demonstration: "ON
," "OFF."
DIM (Dimmer)
Changes the display brightness.
-"AT": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
-"ON": to dim the display.
-"OFF": deactivate the dimmer.
CONTRAST
Adjusts the contrast of the display. The contrast
level is adjustable
in 7steps.
ILM (Illumination)
Changes the illumination color:
"ILM-I ,"
"ILM-2."
M.DSPL (Motion Display)
Selects the Motion Display mode.
-"LM": to show moving patterns and level
meter.
-"ON": to show moving patterns.
-"OFF": to deactivate the Motion Display.
MONO*2 (Monaural mode)
Selects monaural reception mode to improve
poor FM reception: "ON," "OFF."
Z.TIME (Zappin Time)
Selects the playback time for the ZAPPIN
function.
-"Z.TIME-I (6 seconds)," "Z.TIME-2
(9
seconds)," "Z.TIME-3 (30 seconds)."
LPF (Low Pass Filter)
Selects the subwoofer cut-offfrequency: "OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
LPF NORM/REV (Low Pass Filter Normal!
Reverse)
Selects the phase when the LPF is on: "NORM,"
"REV."
HPF (High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
LOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
BTM (page 12)
*IWhen the unit is turned off.
*2 When FM is received.
Memory backup
Your last settings are stored automatically.
Sound settings (except volume), setup items
(except clock) and tuner presets are stored in the
internal memory
of the unit.
A.SCRL (Auto Scroll)
Scrolls long items automatically: "ON," "OFF."
LOCAL (Local seek mode)
-"ON": to only tune into stations with stronger
signals.
18
-"OFF": to tune normal reception.
----------"---

Using optional equipment
Marine remote commander
RM-X60M1X11 M
RM-X60M
///'ilW-..lo_ GP/ALBM
-/+
~~~I-----';:"~~-+- SEEK -/+
MUTING ~~.,,~'\.
(ATT)
OFF ------'><..., ~~bd-
VOLUME --~;:F;~r
+/- I...... ~- MODE
SOURCE
Location of controls
The corresponding buttons on the marine remote
commander control the same functions as those
on this unit.
Disc number
CD changer
Selecting the changer
1Press (SOURCE) repeatedly until "CD"
appears.
2Press ('7
M
=O=O=E=-') repeatedly until the desired
changer appears.
Unit number
Playback starts. RM-X11M
Skipping albums and discs
1During playback, press CD/CD (ALBUM -/
+).
-
\.... ~T--MODE
Ir"-:_~~;=-:;~+- SEEK -/+
OF F-+-t'--l'4t
VOL +/- ----yi-~~~;
GP/ALBM
-/+ --~~====~
repeatedly.
within 2seconds
of first
releasing.
and release (hold for a
moment).
Press CD/CD (ALBUM -/+)
discs
album
album
continuously
To skip
discs
continuously then, press again within 2
seconds and hold.
The following controls on the marine remote
commander require adifferent operation from
the unit.
To return to normal play mode, select "e:: OFF"
or "SHUF OFF."
Repeat and shuffle play
1During playback, press ®(REP) or CD
(SHUF) repeatedly until the desired setting
appears.
Select
e:: DISC
SHUF
CHANGER
To play
disc repeatedly.
tracks in the changerin random
order.
•VOLUME (VOL) +/- button(s)
The same as the control dial on the unit.
• GP/ALBM -/+ button(s)
The same as CD/CD (ALBUM -/+) on the
unit.
•MUTING button
To attenuate the sound. (The same as (ATT) on
the card remote commander.)
•MODE button
Press to: Select the radio band (FM/AM)/select the
play mode
of iPod.
Press and hold
to: Enter/cancel the passenger
control.
19

Adjust the volume level
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX IN
jack on the unit and then simply
selecting the source, you can listen on your boat
speakers. The volume level is adjustable for any
difference between the unit and the portable
audio device. Follow the procedure below:
Be sure to adjust the volume for each connected
audio device before playback.
1Turn down the volume on the unit.
2Press
(SOURCE) repeatedly until "AUX"
appears.
"AUX REAR IN" appears.
3Start playback
of the portable audio device at a
moderate volume.
4Set your usual listening volume on the unit.
SAdjust the input level (page 17).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To decrease
If you need to mount the rotary commander on
the right hand side
of the steering column, you
can reverse the operative direction.
1While pushing the VOL control, press and
hold
(SEL).
MODE
ATT
SOURCE
•ATT (attenuate) button
To attenuate the sound. To cancel, press again.
•SEL (select) button
The same as the SELECTIENTER button on
the unit.
•PRESET/DISC control
CDIUSB: The same as CD/® (ALBUM -/+)
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
•VOL (volume) control
The same as the control dial on the unit (rotate).
•SEEKIAMS control
The same as (SEEK) -/+ on the unit (rotate, or
rotate and hold).
•DSPL (display) button
To change display items.
•MODE button
Press to: Select the radio band (FM/AM)/select the
play mode of iPod.
Press and hold
to: Enter/cancel the passenger
control.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
•
20