Sony DSX-M50BT User manual

SONY.
FM/AM
Digital Media Player
Owner's Record
The model and serial numbers are located on the bottom of the unit.
Record the serial
number in the space provided below.
Refer
to these numbers whenever you call upon your Sony dealer
regarding this product.
ModeiNo.DSX-MSOBT
Serial
No.
-------
To switch the FM/ AM tuning step, see page 10.
To cancel the demonstration (DEMO) display, see page 20.
Pour
commuter l'intervalle de syntonisation FM/ AM, reportez-vous
a Ia page 10.
Pour annuler l'affichage de demonstration (DEMO), reportez-vous a
Ia page 23.
Para cambiar el paso de sintonizaci6n de FM/ AM, consulta Ia
pagina 10.
Para cancelar Ia pantalla de demostraci6n (DEMO), consulte Ia
pagina 21.
Made for
~ iPod D iPhone
0 Bluetooth®
4-484-593-21(1)
Operating Instructions
Mode d'emploi •
Manual de instrucciones •

Be
sure
to
install this unit in the dashboard
of
the boat for safety.
For
installation and connections,
see
the
supplied installation/connections manual.
Warning
FOR
THE
CUSTOMERS
IN
THE
USA.
NOT
APPLICABLE
IN
CANADA, INCLUDING
IN
THE
PROVINCE
OF
QUEBEC.
POUR
LES
CLIENTS
AUX
ETATS-UNIS.
NON
APPLICABLE
AU
CANADA, Y
COMPRIS
LA
PROVINCE
DE
QUEBEC.
This equipment has been tested and found
to
comply with the limits for a
Class
Bdigital
device, pursuant
to
Part
15
of
the
FCC
Rules.
These limits are designed
to
provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and
can
radiate
radio frequency energy and,
if
not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there
is
no guarantee that
interference will not occur in a particular
installation.
If
this equipment does cause
harmful interference to radio or television
reception, which
can
be determined by
turning the equipment
off
and on, the user
is
encouraged
to
try
to
correct the interference
by one or more
of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the
equipment and receiver.
-Connect the equipment into
an
outlet on a
circuit different from that to which the
receiver
is
connected.
-Consult the dealer or
an
experienced radio/
TV
technician
for
help.
You
are
cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.

This device complies with Part 15 of the FCC
Rules and Industry Canada licence-exempt RSS
standard{s). Operation is subject to the
following two conditions: {1) this device may not
cause harmful interference, and {2) this device
must accept any interference received,
including interference
that maycause undesired
operation
of the device.
This transmitter must
not be co-located or
operated in conjunction
with any other antenna
or transmitter.
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna
of a type and maximum (or lesser) gain
approved for the transmitter by Industry
Canada.
To reduce potential radio interference
to other users, the antenna type and its gain
should be
so chosen that the equivalent
isotropically radiated
power (e.i.r.p.) is not more
than
that necessary for successful
communication.
This
equipment complies with FCC/IC radiation
exposure limits set
forth for an uncontrolled
environmentand meets
the FCC radio frequency
{RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency
{RF) Exposure rules. This equipment has very
low levels
of RF energy that it deemed to
comply without maximum permissive exposure
evaluation
{MPE). But it is desirable that it
should be installed and operated keeping the
radiator at least 20
em or more away from
person's
body (excluding extremities: hands,
wrists, feet and ankles).
For the State of California, USA only
Perchlorate Material- special handling may
apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate
Made in Thailand
The nameplate indicating operating voltage,
etc.,
is located on the bottom of the chassis.
CE:
Hereby, Sony Corp., declares that this DSX-
M50BT is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC.
For details, please access the following URL:
http:/ /www.compliance.sony.de/
Notice for customers: the following
information
is only applicable to
equipment sold in countries applying EU
Directives
Manufacturer: Sony Corporation, 1-7-1 Kanan
Minato-ku Tokyo, 108-0075 Japan
For EU product compliance: Sony
Deutschland GmbH, Hedelfinger Strasse
61,
70327 Stuttgart, Germany

Disposal of waste batteries
and electrical and electronic
equipment (applicable
in the
European Union and other
European countries with
separate collection systems)
This symbol on the product, the batteryor on
the packaging indicates
that the product and
the battery shall
not be treated as household
waste.
On certain batteries this symbol might
be used in combination with a chemical
symbol. The chemical symbols
for mercury
{Hg) or lead {Pb) are added
if the battery
contains more than 0.0005% mercury or
0.004% lead.
By ensuring these products and
batteries are disposed
of correctly, you will
help prevent potentially negative
consequences
for the environment and
human health which could otherwise be
caused by inappropriate waste handling. The
recycling
of the materials will help to
conserve natural resources.
In case of products that for safety,
performance
or data integrity reasons
require a permanent connection
with an
incorporated battery, this battery should be
replaced by qualified service
staff only. To
ensure that the battery and the electrical and
electronic
equipment will be treated
properly, hand over these products at end-
of-life
to the applicable collection point for
the recycling of electrical and electronic
equipment.
For all other batteries, please
view the section on
how to remove the
battery from the product safely. Hand the
battery over
to the applicable collection
point for the recycling of waste batteries. For
more detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service
or the shop where you
purchased the product
or battery.
Note on the lithium battery
Do not expose the battery to excessive heat
such
as direct sunlight, fire or the like.
Note on the waterproof cover of the unit
Under the environment of potential water
splash, Sony highly recommends
to protect
the
unit with Waterproof Car Stereo Cover
(not supplied).
While an iPod or
USB device is connected,
the Waterproof
Car Stereo Cover cannot be
fully closed. Avoid splashing water on
the
unit.
Warning if your boat's ignition has no
ACC position
Be sure to set the AUTO OFF function
(page
21 ). The unit will shut offcompletely
and automatically in the set time after the
unit
is turned off, which prevents battery
drain. Ifyou do not set the
AUTO OFF
function, press and hold OFF until the display
disappears
each time you turn the ignition
off.

Caution
IN
NO
EVENT
SHALL
SONY
BE
LIABLE
FOR
ANY
INCIDENTAL,
INDIRECT
OR
CONSEQUENTIAL
DAMAGES
OR
OTHER
DAMAGES
INCLUDING, WITHOUT LIMITATION,
LOSS
OF
PROFITS,
LOSS
OF
REVENUE,
LOSS
OF
DATA,
LOSS
OF
USE
OF
THE
PRODUCT
OR
ANY
ASSOCIATED
EQUIPMENT,
DOWNTIME,
AND
PURCHASER'S
TIME
RELATED
TO
OR
ARISING
OUT
OF
THE
USE
OF
THIS
PRODUCT,
ITS
HARDWARE
AND/OR
ITS
SOFTWARE.
IMPORTANT NOTICE!
Safe and efficient use
Changes
or
modifications
to
this
unit
not
expressly approved
by
Sony
may
void
the
user's
authority
to
operate
the
equipment.
Please check
for
exceptions, due
to
national
requirement
or
limitations, in usage
of
BLUETOOTH
equipment
before using this
product.
Driving
Check
the
laws and regulations on
the
use
of
cellular phones and handsfree
equipment
in
the
areas where you drive.
Always give full
attention
to
driving and stop
the
boat
in a safe place before making
or
answering a call
if
driving conditions
so
require.
Connecting to other devices
When connecting
to
any
other
device, please
read its user
guide
for
detailed safety
instructions.
Radio frequency exposure
RF
signals
may
affect
improperly
installed
or
inadequately shielded electronic systems in
boats, such
as
electronic fuel injection
systems, electronic antiskid (antilock)
braking systems, electronic speed control
systems
or
air bag systems. For installation
or
service
of
this device, please consult
with
the
manufacturer
or
its representative
of
your
boat. Faulty installation
or
service
may
be dangerous and may invalidate any
warranty
that
may
apply
to
this device.
Consult
with
the
manufacturer
of
your
boat
to
ensure
that
the
use
of
your
cellular
phone
in
the
boat
will
not
affect its electronic
system.
Check regularly
that
all wireless device
equipment
in
your
boat
is
mounted
and
operating properly.
Emergency calls
This
BLUETOOTH
boat
handsfree and
the
electronic device connected
to
the
handsfree
operate using radio signals, cellular, and
landline networks
as
well
as
user-
programmed
function, which cannot
guarantee connection
under
all conditions.
Therefore
do
not
rely solely
upon
any
electronic device
for
essential
communications
(such
as
medical
emergencies).
Remember, in
order
to
make
or
receive calls,
the
handsfree and
the
electronic device
connected
to
the
handsfree
must
be
switched
on
in a service area
with
adequate
cellular signal strength.
Emergency calls
may
not
be possible on all
cellular
phone
networks
or
when
certain
network
services
and/or
phone features are
in use.
Check
with
your
local service provider.

Table of Contents
Settings
Canceling the DEMO Mode ............. 20
Warning
.............................. 2 Basic Setting Operation
................ 20
Guide
to Parts and Controls .............. 7 General Setup
........................ 21
BT INIT {BLUETOOTH initialize) ........ 21
Sound Setup ......................... 22
Getting Started
EQ3 PRST {EQ3 preset) ............... 22
Detaching the Front Panel ............... 9
EQ3 LOW, EQ3 MID, EQ3 HIGH ........ 22
Switching the FM/AM Tuning Step ....... 10
BLUETOOTH Setup .................... 22
Setting the Clock ...................... 10
Preparing a
BLUETOOTH Device .......... 10
Connecting an iPod/USB Device
......... 12
Additional Information
Connecting Other Portable Audio
Precautions .......................... 23
Device ............................ 12
Maintenance ......................... 25
Specifications ........................ 26
Listening to the Radio
Troubleshooting ...................... 28
Listening
to the Radio .................. 13
Using Radio Data System (RDS} .......... 13
Playback
Playing an iPod/USB Device ............. 15
Playing a BLUETOOTH Device ............ 16
Searching and Playing Tracks ............ 16
Handsfree Calling
Receiving a Call ....................... 18
Making a Call ......................... 18
Available Operations during Call ......... 19
6GB

Guide
to
Parts
and
Controls
The number
2/
ALBUM
• button has a tactile dot.
[I]
Q {browse) (page
17}
Enter the browse mode during playback.
[2]
SOURCE
Turn
on the power.
Change the source.
-OFF
Press
and hold for1second
to
turn
off
the power.
Press
and hold for more than 2 seconds
to
turn
off
the
power
and the display.
If
the
unit
is
turned
off
and the display
disappears, it
is
unable you
to
operate
with the remote.
~
Control dial
Rotate
to
adjust the volume.
ENTER
Enter the selected item.
SELECT
Enter sound setting.
Press
and hold
to
open the general setup
menu.
~
(handsfree)
Receive/end a call.
[4]
CALL
Enter the call menu.
Press
and hold more than 2 seconds
to
switch the
BLUETOOTH
signal.
[ID
Display
window

[§]
~{back)
Return
to
the previous display.
MODE {page 13,
15,
20)
[1]
~
{front
panel
release)
rnJ
SEEK+/-
Tune
in
radio stations automatically.
Press
and hold to tune manually.
~I~
{prev/next),
.,....,~
{reverse/fast-forward)
[ID
Receptor
for
the
remote
commander
[Q]
PTY
{program
type)
Select
PTY
in
RDS.
[1]
Number
buttons
Receive stored radio stations.
Press
and
hold to store stations.
Call
a stored phone number.
Press
and
hold to store a phone number.
ALBUM
'Y/~
Skip
an
album for audio device.
Press
and
hold to skip albums continuously.
PAUSE
SHUF
{shuffle)
MIC
{page
20)
~
DSPL
{display)
Change display items.
-SCRL
{scroll)
Press
and hold to scroll a display item.
~
USB
port
!H)
AUX
input
jack
16~---+--
The
VOL
(volume)+ button
has
a tactile dot.
Remove the insulation film before
use.
[1§]
...
{~)/-+
{~)
~
VOL
{volume)+/-
[11]
SOUND
Open the sound setup menu directly.
-MENU
Press
and hold to open the general setup
menu.
~
t
{+)/.f.{-)

11§]
VOL
(volume)+/-
[§]
GP
(group)/
ALBM
(album)+/-
Receive stored stations.
Getting
Started
Detaching
the
Front
Panel
You
can
detach the front panel
of
this
unit
to
prevent theft.
1 Press and hold
OFF
G).
The
unit
is
turned off.
2
Press
~
®,
then remove
the
panel
by
pulling
it
towards you.
Caution
alarm
If
you turn the ignition switch
to
the
OFF
position
without
detaching the front panel,
the caution alarm will sound for a few
seconds. The alarm will only sound
if
the
built-in amplifier
is
used.
9GB

Switching
the
FM/
AM
Tuning
Step
Set
the FM/AM
tuning
step
of
your country.
This setting appears when this
unit
is
turned
off.
1
Press
and hold
SELECT.
The setup display appears.
2 Rotate
the
control dial
to
select
[TUNER-STP],
then
press it.
3 Rotate
the
control dial
to
select
from
[SOK/9K], [100K/10K]
or
[200K/10K],
then
press it.
Setting
the
Clock
1
Press
and hold
SELECT.
The setup display appears.
2 Rotate
the
control dial
to
select
[
CLOCK-ADJ],
then
press it.
The
hour
indication flashes.
3 Rotate
the
control dial
to
set
the
hour
and minute.
To
move the digital indication, press
SEEK
+/-.
10GB
4
After
setting
the
minute, press
SELECT.
The setup
is
complete and the clock
starts.
To
display the clock, press
DSPL.
Preparing
a
BLUETOOTH
Device
You
can
enjoy music,
or
perform handsfree
calling, by connecting a suitable
BLUETOOTH
device.
For
details on connecting, refer
to
the
operating instructions supplied
with
the
device.
Before connecting the device, turn
down
the
volume
of
this unit; otherwise, loud sound
may result.
When connecting a
BLUETOOTH
device
(cellular phone, audio device, etc.) for the
first time, mutual registration (called
"pairing")
is
required. Pairing enables this
unit and
other
devices
to
recognize each
other.
1 Place
the
BLUETOOTH
device
within
1m
{3
ft}
of
this unit.

2
Press
CALL,
rotate
the
control dial
to
select [PAIRING],
then
press it.
0 flashes.
The unit enters pairing standby mode.
3 Perform pairing on
the
BLUETOOTH
device so
it
detects this unit.
4 Select [Sony
Automotive]
shown in
the
display
of
the
BLUETOOTH
device.
If [Sony Automotive] does
not
appear,
repeat from step
2.
DR-BT30Q
I.
I
SonY.~
!Automotive~
xxxxxxx
5
If
passkey*
input
is
required on
the
BLUETOOTH
device,
input
[0000].
*
Passkey may be called "passcode,"
"PIN
code,"
"PIN
number"
or "Password," etc.,
depending on the device.
LC~~-
Input
passkey
LQ2xx~xx~Hl--
[
0000]
When pairing
is
made,
0
stays lit.
6 Select this
unit
on
the
BLUETOOTH
device
to
establish
the
BLUETOOTH
connection.
~"
or~"
lights up when the connection
is
made.
Note
While connecting
to
a
BLUETOOTH
device, this
unit
cannot be detected from another device.
To
enable
detection, enter the pairing mode and search
for
this
unit
from
another device.
To
cancel
pairing
Perform step 2
to
cancel the pairing mode
afterthis unit and the
BLUETOOTH
device are
paired.
To
use a paired device, connection with this
unit
is
required. Some paired devices will
connect automatically.
1 Press
CALL,
rotate
the
control dial
to
select
[BT
SIGNL],
then press it.
Make sure
that
0 lights up.
2 Activate
the
BLUETOOTH
function
on
the
BLUETOOTH
device.
3 Operate
the
BLUETOOTH
device
to
connect
to
this
unit.
~"
or
~"
lights up.
Icons
in
the display:
~"
Lights up when a cellular phone
is
connected to the unit.
~"
Lights up when
an
audio device
is
connected
to
the unit.
11GB

To
connect
the
last-connected device
from
this
unit
Activate the
BLUETOOTH
function
on
the
BLUETOOTH
device.
Press
SOURCE.
Select
[BT
PHONE]
or
[BT
AUDIO].
Press
\.
{handsfree)
to
connect
with
the
cellular phone,
or
PAUSE
to
connect
with
the
audio device.
Note
While streaming
BLUETOOTH
audio, you cannot
connect from this unit to the cellular phone.
Connect from the cellular phone
to
this unit
instead.
Tip
With
BLUETOOTH
signal on: when the ignition
is
turned to on, this
unit
reconnects automatically to
the last-connected cellular phone.
Connecting
an
iPod/USB
Device
1 Turn
down
the
volume
on
the
unit.
2 Connect
the
iPod/USB device
to
the
unit.
12GB
To
connect an iPod/iPhone, use
the
USB
connection cable
for
iPod
(not
supplied).
When connecting an iPhone
Connecting
Other
Portable
Audio
Device
1 Turn
off
the
portable audio device.
2 Turn
down
the
volume
on
the
unit.
3 Connect
the
portable audio device
to
the
AUX
input
jack (stereo mini
jack) on
the
unit
with
a connecting
cord
(not
supplied)*.
*
Be
sure
to
use a straight type plug.
4
Press
SOURCE
to
select [AUX].
To
match
the
volume
level
of
the
connected
device
to
other
sources
Start playback
of
the
portable
audio device
at
a
moderate
volume, and set
your
usual
listening
volume
on
the
unit.
Press
SELECT,
and rotate
the
control dial
to
select [AUX VOL] (page
22).

Listening
to
the
Radio
Listening
to the
Radio
Tuning step setting
is
required (page 10).
To
listen
to
the
radio, press
SOURCE
to
select
[TUNER].
1
Press
MODE
to
change
the
band.
2
Press
and hold
SELECT
(FM1,
FM2,
FM3,
AM1
or
AM2).
The setup display appears.
3 Rotate
the
control dial
to
select
[BTM],
then
press it.
The
unit
stores stations in order
of
frequency on
the
number
buttons.
1
Press
MODE
to
change
the
band
(FM1,
FM2,
FM3,
AM1
or
AM2).
2 Perform
tuning.
To
tune
manually
Press
and hold SEEK+/-
to
locate the
approximate frequency,
then
press
SEEK
+I-
repeatedly
to
fine adjust
to
the
desired frequency.
To
tune
automatically
Press
SEEK+/-.
Scanning stops
when
the
unit
receives a
station. Repeat this procedure until
the
desired station
is
received.
1 While receiving
the
station
that
you
want
to
store, press and hold a
number
button
(1
to
6} until [MEM]
appears.
1 Select
the
band,
then
press a
number
button
(1
to
6).
Using
Radio
Data
System
(RDS)
Use
PTY
to
display or search for a desired
program type.
1
Press
PTY
during
FM
reception.
2 Rotate
the
control dial until
the
desired program
type
appears,
then
press it.
The
unit
starts
to
search for a station
broadcasting
the
selected program type.
13GB

Type
of
programs
(tuner step: 200 kHz/10
kHz)
NEWS
(News),
INFORM
(Information),
SPORTS
(Sports),
TALK
(Talk),
ROCK
(Rock),
CLS
ROCK
(Classic Rock),
ADLT HIT
(Adult
Hits),
SOFT
RCK
(Soft Rock),
TOP
40
(Top
40),
COUNTRY
(Country),
OLDIES
(Oldies),
SOFT
(Soft),
NOSTALGA
(Nostalgia),
JAZZ
(Jazz),
CLASSICL
(Classical),
RAND
B
(Rhythm and
Blues),
SOFT R B
(Soft Rhythm and Blues),
LANGUAGE
(Foreign Language),
REL
MUSC
(Religious Music),
REL
TALK
(Religious Talk),
PERSNLTY
(Personality),
PUBLIC
(Public),
COLLEGE
(College),
WEATHER
(Weather)
Type
of
programs
(tuner step: 100 kHz/10
kHz,
50 kHz/9
kHz)
NEWS
(News),
AFFAIRS
(Current Affairs),
INFO
(Information),
SPORT
(Sports),
EDUCATE
(Education),
DRAMA
(Drama),
CULTURE
(Culture),
SCIENCE
(Science),
VARIED
(Varied),
POP M
(Pop Music),
ROCK M
(Rock Music),
EASY M
(M.O.R.
Music),
LIGHT M
(Light
classical),
CLASSICS
(Serious classical),
OTHER M
(Other Music),
WEATHER
(Weather),
FINANCE
(Finance),
CHILDREN
(Children's program),
SOCIAL A
(Social Affairs),
RELIGION
(Religion),
PHONE
IN
(Phone In),
TRAVEL
(Travel),
LEISURE
(Leisure),
JAZZ
(Jazz
Music),
COUNTRY
(Country Music),
NATION M
(National Music),
OLDIES
(Oldies Music),
FOLK M
(Folk Music),
DOCUMENT
(Documentary)
14GB
The
CT
data
from
the
RDS
transmission sets
the
clock.
1
Set [CT-ON] in
the
general setup
(page
21).

Playback
Playing
an
iPod/USB
Device
In
these Operating Instructions, "iPod"
is
used
as
a general reference
for
the
iPod
functions on
an
iPod and iPhone, unless
otherwise specified by the text or
illustrations.
For
details on the compatibility
of
your iPod,
see "About iPod" (page 23}
or
visit
the
support site on
the
back cover.
MSC
(Mass Storage Class)-type
USB
devices
(such
as
a
USB
flash drive, digital media
player, Android™ phone) compliant
with
the
USB
standard
can
be used.
Depending on
the
digital media player or
Android phone, setting
the
USB
connection
mode
to
MSC
is
required.
Notes
•
For
details on the compatibility
of
your
USB
device, visit the support site on the back cover.
• Playback
of
the following MP3/WMA files
is
not
supported.
-lossless compression files
-copyright-protected
files
-
DRM
(Digital Rights Management) files
-Multi-channel
audio files
1 Connect an iPod/USB device
to
the
USB
port
(page
12).
Playback starts.
If
a device
is
already connected,
to
start
playback, press
SOURCE
to
select
[USB].
2 Adjust
the
volume
on this unit.
To
stop
playback
Press
and hold
OFF
for
1second.
To
remove
the
device
Stop playback, then remove the device.
Caution
for
iPhone
When you connect an iPhone via
USB,
phone
call volume
is
controlled by the iPhone,
not
the
unit.
Do
not
inadvertently increase the
volume on
the
unit during a call,
as
sudden
loud sound may result when the call ends.
Press
and hold
MODE
during playback
to
display [IPOD]
to
enable operation by
the
iPod directly.
Note
that
the
volume can be adjusted only
by the unit.
To
exit
passenger control
Press
and hold
MODE
until [AUDIO] appears.
15GB

Playing
a
BLUETOOTH
Device
You
can play contents on a connected device
that
supports
BLUETOOTH
A2DP {Advanced
Audio Distribution Profile).
~;
>
)))
((C<
1 Make
BLUETOOTH
connection
with
the
audio
device (page 10).
2
Press
SOURCE
to
select
[BT
AUDIO].
3 Operate
the
audio device
to
start
playback.
4 Adjust
the
volume
on this unit.
5
Press
PAUSE
to
start playback.
Notes
• Depending on the audio device, information such
as
title, track
number/time
and playback status
may not be displayed on this unit.
•
Even
if
the source
is
changed on this unit,
playback
of
the audio device does
not
stop.
To
match
the
volume
level
of
the
BLUETOOTH
device
to
other
sources
Start playback
of
the
BLUETOOTH
audio
device at a moderate volume, and set
your
usual listening
volume
on
the
unit.
Press
SELECT,
and rotate
the
control dial
to
select
[BTA
VOL] (page
22).
16GB
Searching
and
Playing
Tracks
Repeat
play:
1 During playback, press and hold
SELECT.
2 Rotate
the
control dial
to
select
[REPEAT],
then
press it.
3 Rotate
the
control dial
to
select
the
desired play mode,
then
press it.
4 Press
~
(back)
to
return
to
the
previous display.
Shuffle
play:
1 During playback, press
SHUF
repeatedly
to
select
the
desired
play mode.
Playback in selected play
mode
may take
time
to
start.
Available play modes
differ
depending
on
the
selected sound source.

1 During
USB
playback, press Q
(browse)*
to
display
the
list
of
search categories.
When
the
track list appears, press
~
{back) repeatedly
to
display
the
desired
search category.
* During playback, press Q {browse) for more
than 2 seconds
to
directly return
to
the
beginning
of
the category list.
2 Rotate
the
control dial
to
select
the
desired search category,
then
press
it
to
confirm.
3 Repeat step 2
to
search
the
desired
track.
Playback starts.
To
exit
the
Quick-BrowZer
mode
Press
Q {browse).
1
Press
Q (browse).
2
Press
SEEK+.
3 Rotate
the
control dial
to
select
the
item.
The list
is
jumped
in steps
of
10%
of
the
total
number
of
items.
4 Press
ENTER
to
return
to
the
Quick-
Brawler
mode.
The selected item appears.
5 Rotate
the
control dial
to
select
the
desired item,
then
press it.
Playback starts.
17GB

Handsfree
Calling
To
use a cellular phone, connect
it
with
this
unit.
For
details, see ''Preparing a
BLUETOOTH
Device" (page 10).
~
Receiving
a
Call
1
Press
~
(handsfree)
when
a call
is
received
with
a ringtone.
The phone call starts.
Note
The ringtone and talker's voice are
output
onlyfrom
the front speakers.
To
reject
the
call
Press
and hold
OFF
for
1second.
To
end
the
call
Press
~
(handsfree) again.
18GB
Making
a
Call
You
can make a call
from
the
phonebook
or
call history
when
a cellular
phone
supporting
PBAP
(Phone Book Access Profile)
is
connected.
1
Press
CALL,
rotate
the
control dial
to
select
[PH
BOOK], then press it.
2 Rotate
the
control dial
to
select an
initial
from
the
initial list,
then
press
it.
3 Rotate
the
control dial
to
select a
name
from
the
name
list, then
press it.
4 Rotate
the
control dial
to
select a
number
from
the
number
list, then
press it.
The
phone
call starts.
1
Press
CALL,
rotate
the
control dial
to
select
[RECENT],
then
press it.
A list
of
the
call history appears.
2 Rotate
the
control dial
to
select a
name
or
phone
number
from
the
call history,
then
press it.
The
phone
call starts.

1
Press
CALL,
rotate
the
control dial
to
select [DIAL NUM],
then
press it.
2 Rotate
the
control dial
to
enter
the
phone
number, and lastly select [ ]
{space),
then
press
~
{handsfree)*.
The phone call starts.
*
To
move the digital indication, press SEEK+/-.
Note
[_]appears instead
of[#]
on the display.
1
Press
CALL,
rotate
the
control dial
to
select [REDIAL],
then
press it.
The phone call starts.
You
can
store up
to
6 contacts in the preset
dial.
1 Select a
phone
number
that
you
want
to
store in
the
preset dial,
from
the
phonebook, call history
or
by
inputting
the
phone
number
directly.
The phone number appears in the
display
of
this unit.
2
Press
and hold a
number
button
{1
to
6) until [MEM] appears.
The contact
is
stored in the selected
preset number.
1 Press
CALL.
2
Press a
number
button
{1
to
6)
to
select
the
contact you
want
to
call.
3
Press
~
{handsfree
).
The phone call starts.
You
can
make a call by saying the voice tag
stored
in
a connected cellular phone that has
a voice dialing function.
1 Press
CALL,
rotate
the
control dial
to
select
[VO
DIAL], then press it.
2
Say
the
voice tag stored on
the
cellular phone.
Your voice
is
recognized, and the call
is
made.
Available
Operations
during
Call
To
preset
the
volume
of
the
ringtone
and talker's voice
You
can
preset the volume level
of
the
ringtone and talker's voice.
19GB

Adjusting
the
ringtone
volume:
Rotate the control dial while receiving a call.
Adjusting
the
talker's voice
volume:
Rotate the control dial during a call.
To
adjust
the
volume
for
the
other
party
(Mic
gain
adjustment)
Press
MIC.
Adjustable volume levels: [MIC-LOW], [MIC-
MID], [MIC-Hl].
To
reduce echo
and
noise
(Echo
Canceler/Noise Canceler
Mode)
Press
and hold
MIC.
Settable mode: [EC/NC-1], [EC/NC-2].
To
transfer
a call
In
order
to
activate/deactivate the
appropriate device (this unit/cellular phone),
press
MODE
or use your cellular phone.
Note
Depending on the cellular phone, handsfree
connection may
be
cut
off
when call transfer
is
attempted.
20GB
Settings
Canceling
the
DEMO
Mode
You
can
cancel the demonstration display
which appears while this unit
is
turned off.
1 Press and hold
SELECT.
The setup display appears.
2
Rotate
the
control dial
to
select
[DEMO],
then
press it.
3
Rotate
the
control dial
to
select
[DEMO-OFF],
then
press it.
The setting
is
complete.
4
Press
~
(back).
The display returns to normal reception/
play mode.
Basic
Setting
Operation
You
can
set items
in
the menu to the
following procedure.
The
following
items can be set depending on
the source and setting.
1 Press
SELECT
for
the
sound setup,
press and hold
SELECT
for
the
general setup,
or
press
CALL
for
the
BLUETOOTH
setup.
2
Rotate
the
control dial
to
select
the
desired item,
then
press it.