10
Recording a CD
— CD Synchro Recording
The CD SYNC button lets you record from a CD
to a tape easily. You can use TYPE I (normal) or
TYPE II (CrO2) tape, since the tape deck
automatically detects the tape type.
Tape deck TC-TX373
26
5
4
H
hx
DOLBY NR* Cassette
indicator
* This tape deck is equipped with the Dolby B-type
noise reduction system.
The remote supplied with the
DHC-MD373
x
.>
H
`/1
X
M
m
x
1
Tips
• When you press `/1 (power) on the tape deck, only
the tape deck turns on. Press `/1 (power) on the
DHC-MD373/333 to turn on the DHC-MD373/333
component system.
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette is
inserted.
• Pressing Hor hwhen the tape deck is off
automatically turns on the tape deck and starts
playing a tape if there is a cassette inserted (One
Touch Play) (DHC-MD333 only).
• Inserting the tape when the power is off
automatically turns on the tape deck only. Press
`/1 (power) on the DHC-MD373/333 to turn on
the DHC-MD373/333 component system.
• You can switch from another source to the tape
deck just by pressing Hor h(Automatic
Source Selection).
• To start playing automatically from the beginning
of the tape after fast winding (Auto Play), press
Hwhile holding down m(for the top side) or
press hwhile holding down M(for the bottom
side).
• To listen to a tape recorded with the Dolby noise
reduction system, set DOLBY NR to ON.
• Using the timer function on the DHC-MD373/333,
you can wake up to music at a preset time. For
details, refer to “Wake up to music” in the DHC-
MD373/333 component system Instruction Manual.
When you set the Wake-up timer, DOLBY NR
must be set on the tape deck.
Note
The AMS feature may not work in the following
cases:
— the blank space between tracks is four seconds
or less.
— the sound source recorded on the right channel
is different from that on the left channel as with
a KARAOKE tape.
— low volume or low sound continues for a long
time.
— the TV is too close to the tape deck.
Playing a tape (continued)
