Sony DSLR-A700 Operating instructions

To reduce fire or shock hazard, do
not expose the unit to rain or
moisture.
CAUTION:.TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER·SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2
This symbol is intended to
alert the user to the presence
of uninsulated "dangerous
voltage" within the product's
enclosure that may be
of
sufficient magnitude to
constitute arisk
of electric
shock to persons,
This symbol
is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.

IMPORTANT SAFEGUARDS
Foryour protection, please read these safety
instructions completely before operating
the appliance, and keep this manual for
future reference.
Carefully observe all warnings, precautions
and instructions on the appliance, or the one
described in the operating instructions and
adhere to them.
Power Sources
This set should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of electrical power
supplied to your home, consult your dealer or
local power company. For those sets designed to
operate from battery power, or other sources, refer
to the operating instructions.
Polarization
This set may be equipped with apolarized ac
power cord plug (a plug having one blade wider
than the other).
This plug will fit into the power outlet only one
way. This is asafety feature.
If you are unable to
insert the plug fully into the outlet, try reversing
the plug.
If the plug should still fail to fit, contact
your electrician to have asuitable outlet installed.
Do not defeat the safety purpose of the polarized
plug by forcing it in.
Overloading
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity,
since this can result in fire
or electric shock.
Object and Liquid Entry
Never push objects of any kind into the set
through openings as they may touch dangerous
voltage points or sh0l1 out parts that could result
in afire
or electric shock. Never spill liquid of any
kind on the set.
Attachments
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
Cleaning
Unplug the set from the wall outlet before
cleaning or polishing it. Do not use liquid cleaners
or aerosol cleaners. Use acloth lightly dampened
with water for cleaning the exterior
of the set.
Water and Moisture
Do not use power-line operated sets near water-
for example, near abathtub, washbowl, kitchen
sink, or laundry tub, in awet basement, or near a
swimming pool, etc.
Power-Cord Protection
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to the
plugs, receptacles, and the point where the cord
exits from the appliance.
Accessories
Do not place the set on an unstable cart, stand,
tripod, bracket, or table. The set may fall, causing
serious injury to achild
or an adult, and serious
damage to the set. Use only acart, stand, tripod,
bracket, or table recommended by the
manufacturer.
Ventilation
The slots and openings in the cabinet are provided
for necessary ventilation. To ensure reliable
operation
of the set, and to protect it from
overheating, these slots and openings must never
be blocked or covered.
-Never cover the slots and openings with acloth
or other materials.
-Never block the slots and openings by placing
the set on abed, sofa, rug,
or other similar
surface.
-Never place the set
in aconfined space, such as
abookcase, or built-in cabinet, unless proper
ventilation is provided.
-Do not place the set near or over aradiator or
heat register,
or where it is exposed to direct
sunlight.
3

4
Lightning
For added protection for this set during alightning
stonn,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna
or cable system.
This will prevent damage to the set due to
lightning and power-line surges.
Damage Requiring Service
Unplug the set from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
-When the power cord or plug is damaged
or
frayed.
-
If liquid has been spilled or objects have fallen
into the set.
-
If the set has been exposed to rain or water.
-
If the set has been subject to excessive shock by
being dropped, or the cabinet has been
damaged.
-Ifthe set does not operate nonnally when
following the operating instructions. Adjust
only those controls that are specified
in the
operating instructions. Improper adjustment
of
other controls may result in damage and will
often require extensive work by aqualified
technician to restore the set to nonnal operation.
-When the set exhibits adistinct change in
performance -this indicates aneed for service.
Servicing
Do not attempt to service the set yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the
set, ask the service technician to perform routine
safety checks (as specified by the manufacturer)
to detennine that the set is in safe operating
condition.

Read this first
Replace the battery with the specified type
only. Otherwise, fire or injury may result.
Do not expose the batteries to excessive heat such
as sunshine, fire or the like.
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable.
You can help preserve our
environment by returning your
used rechargeable batteries to
the collection and recycling
location nearest you.
For more information regarding recycling
of
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking
Li thium-Ion batteries.
Battery pack
This device complies with Part 15 of the FCC
Rules, Operation is subject to the following two
conditions:
(I) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This Class Bdigital apparatus complies with
Canadian ICES-003.
;;r'fll~J~;~~II:m~r'~I,~!,~e!:·Pl~~~~~·('@W!;i;,[!'
If you have any questions about this product, you
may call:
Sony Customer Information Services Center
1-800-222-S0NY (7669)
The number below is for the FCC related matters
only.
Regulatory Information
Declaration.of Conformity
Trade Name: SONY
Model No.: DSLR-A700
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part
15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Note:
This equipment has been tested and found to
comply with the limits for aClass Bdigital
device, pursuant to Part
15 of the FCC Rules.
These limits are designed
to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there
is no
guarantee that interference will not occur
in a
particular installation.
If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment
off and on, the user is encouraged to
try to correct the interference by one
or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
-Consult the dealeror an experienced radiolTV
technician for help.
5

6
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant
to Subpart B of Part 15 of
FCC Rules.
Perchlorate Material -special handling may
apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
This product has been tested and found compliant
with the limits set out
in the EMC Directive for
using connection cables shorter than 3meters (9.8
feet).
Attention
The electromagnetic fields at the specific
frequencies may influence the picture and sound
of this unit.
Notice
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail), restart
the application or disconnect and connect the
communication cable (USB, etc.) again.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the
European Union and other European
countries with separate collection
systems)
:it
-
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling
of this product. The recycling of
materials will help to conserve natural resources.
For more detailed information about recycling of
this product, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product.
Applicable Accessories: Remote Commander
Amoulded plug complying with BS 1363 is fitted
to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, afuse
of the same rating as the supplied
one and approved by ASTAor BSI to BS 1362,
(i.e., marked with an
<g> or ~ mark) must be
used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse
cover after you change the fuse. Never use the
plug without the fuse cover.
If you should lose the
fuse cover, please contact your nearest Sony
service station.
The manufacturer
of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service
or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.

Notes on using your camera
Notes on types of "Memory Stick" that
can be used (not supplied)
You can use a"Memory Stick Duo" with
your camera. A"Memory Stick" cannot be
used with your camera.
"Memory Stick Duo"
~:;(~::;":;:::!il I "Memo~ Stick"
•For details on "Memory Stick Duo", see
page 161.
Notes on the "lnfoliTHIUM" battery
pack
•Charge the NP-FM500H (supplied) battery pack
before using the camera for the first time.
(-- step Iin "Read This First")
• The battery pack can be charged even if it is not
completely discharged. Also, even if the battery
pack is not fully charged, you can use the
partially charged capacity
of the battery pack as
IS.
• If you do not intend to use the battery pack for a
long time, use up the existing charge and
remove it from your camera, then store it in a
cool, dry place. This is to maintain the battery
pack functions (page 163).
•
For details on the battery pack, see page 163.
No compensation for contents of the
recording
The contents of the recording cannot be
compensated for
if recording or playback is not
possible due to amalfunction
of your camera or a
memory card, etc.
Back up recommendation
To avoid the potential risk of data loss, always
copy (back up) data to other medium.
Notes on recording/playback
•Before you record one-time events, make atrial
recording to make sure that the camera is
working correctly.
•This camera is designed to be dust- and
moisture-resistant but not to be waterproof and
splash-proof. When using the camera in the rain,
be careful not to get the camera and lens wet.
Clean the camera after use
if the camera
becomes dirty. With water, sand, dust, salt, etc.,
left on the camera, the camera may cause a
malfunction. Read also "Precautions" (page
168).
•Do not look at the sun
or astrong light through a
removed lens or the viewfinder. This may cause
irrecoverable damage to your eyes.
Or it may
cause amalfunction of your camera.
•Do not use the camera near alocation that
generates strong radio waves or emits radiation.
The camera may not be able to record or play
back properly.
•Using the camera in sandy or dusty locations
may cause malfunctions.
•If moisture condensation occurs, remove it
before using the camera (page 168).
•
Do not shake or strike the camera. In addition to
malfunctions and an inability to record images,
this may render the memory card unusable, or
cause image data breakdown, damage or loss.
•Clean the flash surface before use. The heat
of
flash emission may cause dirt on the flash
surface to become discolored or to stick to the
flash surface, resulting
in insufficient light
emission.
•Keep the camera, supplied accessories, etc., out
of the reach of children. The battery pack, the
accessory shoe cap, etc., may be swallowed.
If
such aproblem occurs, consult adoctor
immediately.
7

8
Notes on the LCD monitor and lens
• The LCD monitor is manufactured using
extremely high-precision technology
so over
99.99% of the pixels are operational for
effective use. However, there may be some tiny
black points and/or bright points (white, red,
blue
or green in color) that constantly appear on
the LCD monitor. These points are normal
in the
manufacturing process and do not affect the
images in any way.
~~- Black, white, red, blue
and green points
•Do not expose the camera to direct sunlight. If
sunlight is focused on anearby object, it may
cause afire. When you must place the camera
under direct sunlight, attach the lens cap.
•Images may trail across on the
LCD monitor in
acold location. This
is not amalfunction. When
turning on the camera in acold location, the
LCD monitor may become temporarily dark.
When the camera warms up, the monitor will
function normally.
•Do not press against the
LCD monitor. The
monitor may be discolored and that may cause a
malfunction.
On focal length
The picture angle of this camera is narrower than
that
of a35 mm-format film camera. You can find
the approximate equivalent
of the focal length of a
35 mm-format film camera, and shoot with the
same picture angle, by increasing the focal length
of your lens by half.
For example, by using a50 mm lens, you can get
the approximate equivalent
of a75 mm lens of a
35 mm-format film camera.
On image data compatibility
•This camera conforms with DCF (Design rule
for Camera File system) universal standard
established by JEITA(Japan Electronics and
Information Technology Industries
Association).
•Playback
of images recorded with your camera
on other equipment and playback
of images
recorded or edited with other equipment on your
camera are not guaranteed.
Warning on copyright
Television programs, films, videotapes, and other
materials may be copyrighted. Unauthorized
recording
of such materials may be contrary to the
provisions
of the copyright laws.
The pictures used in this manual
The photographs used as examples of pictures in
this manual are reproduced images, and are not
actual images shot using this camera.

Table of contents
IMPORTANT SAFEGUARDS 3
Read this first 5
Notes on using your camera 7
Before your operation
Identifying parts 14
Indicators on the monitor 19
Switching the recording information display 23
Number of images 24
The number of images that can be recorded when using the battery pack
................................................................................................................28
Basic operation 29
How to use the multi-selector 29
How to use the
Fn (Function) button 30
How to use the menu 32
Using the shooting functions
Using the mode dial. 34
Scene Selection 35
Shooting with program auto - P 36
Shooting with aperture priority mode - A 37
Shooting with shutter speed priority mode - S 39
Shooting with manual exposure mode - M
41
Exposure 45
Adjusting the exposure 45
Locking the exposure (AE lock) 46
Selecting the metering mode 48
Focus 49
Setting the AF area 49
Selecting the focus mode 52
Switching the AF/MF easily 53
Using AF illuminator 54
Drive mode 55
Shooting continuously 56
Using the self-timer 57
Shooting images with the exposure shifted -Bracket: Cont./Bracket: Single
......................................................................................................................... 57
Shooting with the WB bracket 59
Shooting with the
ORO advanced bracket.. 59
Shooting with the Remote Commander 60
9

10
Image processing and color. 61
Adjusting the white balance 61
Setting ISO 64
Using the D-Range Optimizer 66
Using aCreative Style 67
Flash 73
Selecting the flash mode 73
Using the flash compensation 75
Shooting with Slow Sync (Shooting the dark background with flash)
77
Using the flash sync terminal 77
Other operations 79
Registering your own settings , , , , 79
Using the C(Custom) button
81
Using the viewing functions
Viewing images 83
Switching the playback screen 83
Switching to the index screen 84
Displaying the histogram , , , ,
.. " , , 85
Enlarging
images".", ,86
Rotating
an image ,88
Viewing images on a TV screen 89
Operating with the Remote Commander 91
Using the menu
Menu list. 92
~ Recording menu 1 94
Image size
Aspect ratio
Quality
D-RangeOptimizer
Creative Style
Custom button
Exposure step
~ Recording menu 2 99
Flash mode
Flash control
Power ratio
Flash compens.
ISO Auto max.
ISO Auto min.

~ Recording menu 3101
AF-A setup
AF area
Priority setup
AF illuminator
AF wi shutter
Long exp.NR
High ISO NR
~ Recording menu 4 1 04
Memory
Rec mode reset
oCustom menu 1 1 05
Eye-Start AF
EyeStart trigr.
AFIMF button
AFIMF control
AF drive speed
AF area disp.
FocusHoldButton
oCustom menu 2107
AEL button
Ctrl dial setup
Dial exp.comp
Ctrl dial lock
Button ops.
Release w/oCard
Release wloLens
oCustom menu 3110
Red eye reduc.
Exp.comp.set
Bracket order
Auto review
Auto off wi VF
Rec.info.disp.
Img.orientation
oCustom menu 4113
Custom reset
11

12
~ Playback menu 1 114
Delete
Format
Protect
DPOF setup
Date imprint
Index print
PlaybackDisplay
~ Playback menu 2119
Slide show
Interval
~ Setup menu 1120
LCD brightness
Info.disp.time
Power save
Video output
HDMIoutput
Ii3 Language
Dateffime setup
~ Setup menu 2123
Memory card
File number
Folder name
Select folder
New folder
USB connection
MassStrg.card
~ Setup menu 3125
Menu start
Delete confirm.
Audio signals
Cleaning mode
Reset default

Using IDur Gomaulel
Enjoying your computer. 127
Connecting the camera and your computer 129
Copying images to your computer. 130
Image file storage destinations and file names 133
Copying images stored on acomputer to amemory card and viewing the
images 134
Using the software (supplied) 135
Installing the software 136
Using the "Picture Motion Browser" 137
Using the "Image Data Converter SR" 139
Using the "Image Data Lightbox SR" 140
Using the "Remote Camera Control" 142
Irinlill imalel
How to print images 145
Printing images directly using aPictBridge compliant printer. 146
Troubleshooting 149
Warning messages 158
On the memory card (not supplied)
161
On the "lnfoLiTHIUM" battery pack 163
On the battery charger 164
Optional accessories 165
Precautions 168
Specifications 170
Reset default 172
13

14
Before your operation
Identifying parts
Camera
*Do not directly touch these parts.
See the pages in parentheses for details
of
operation.
rn ISO button (64)
[2J ~ (Exposure) button (45)
~ Hooks for shoulder strap (17)
~ Shutter button (-. step 5 in "Read This
First")
[§] Front control dial (30, 107)
[ID Remote sensor (60)
[l] Grip sensor (105)
[ID AF illuminator (54, 102)/Self-timer
lamp (57)
[ID Depth-of-field preview button (39)
[jQj Lens contacts*
[j] Mirror*
I12l Lens mount
~ Lens release button (-. step 2in "Read
This First")
IHl Focus mode lever (52, 101)
MJ WB (White Balance) button (61)
II§] Built-in flash* (-. step 5in "Read This
First")
1m DRIVE button (55)
MI Mode dial (34)
~ HDMI terminal (90,121,148)
[gQ] VIDEO OUT/~ (USB) terminal (89,
129)
~ ~ Flash sync terminal (77)
~ REMOTE terminal (166)
~ DC IN terminal (165)

[j] Viewfinder (- step 5in "Read This
First")
[2] Eyepiece sensors (111)
~ POWER switch (- step 4in "Read
This First")
@] MENU button (32)
[ID DISP (Display) button (23, 83)
[ID llii (Delete) button (- step 6in "Read
This First")
II] ~l (Playback) button (- step 6in
"Read This First")
[ID LCD monitor (20, 23)
lID Multi-selector (29)
[Q] For shooting: C(Custom) button (81,
98)
For viewing:
~ (Histogram) button
(85)
[1] For shooting: Fn (Function) button (30)
For viewing: rq(Rotate) button (88)
l12J Accessory shoe (166)
~ Diopter-adjustment dial (- step 5in
"Read This First")
IHl Metering mode lever (48)
~ For shooting: AEL (AE lock) button
(43, 46)1SLOW SYNC button (77)
For viewing:
~ (Index) button (84)
11m -e- Image sensor position mark (50)
[IZ] For shooting: AFIMF (Auto focus/
manual focus) button (53)
For viewing: Q(Enlarge) button (86)
MRear control dial (30, 107)
~ Access lamp (- step 3in "Read This
First")
~ (~») (Super SteadyShot) switch (- step
5in "Read This First")
[gj] Memory card cover (- step 3in "Read
This First")
122] "Memory Stick Duo" insertion slot (-
step 3in "Read This First")
~ CF card insertion slot (- step 3in
"Read This First")
~ CF card eject lever (- step 3in "Read
This First")
•
15

16
t.·.·········.·············~·····/ .•. i ••••••• · ••••••• ' ••• ). ~
~.B ..•......•... i .• I ... ~~I@]
<M! •I[§]
[I] Tripod receptacle
•Use atripod with ascrew length of less than
5.5 mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
screws longer than 5.5 mm (7/32 inch), and
may damage the camera.
[2J Battery cover open lever (- step J in
"Read This First")
~ Lock lever (- step J in "Read This
First")
[1J Battery insertion slot (- step Jin
"Read This First")
[ID Battery cover (- step 1in "Read This
First")
Remote Commander
~---[Q]
•With the exception of the 2SEC and SHUTTER
buttons, the buttons only work when the camera
is connected to aTV (pages 60, 91,148).
[I] 2SEC (shutter release in 2seconds)
button
[2J SHUTTER button
~ ~ (Histogram) button (85)
[1J DISP (Display) button (83)
[ID ~ (Index) button (84)
[ID 'oJ (Rotate) button (88)
[l] [E (Playback) button (83)
[ID MENU button (32)
[ID PRINT button (148)
I1Q] Transmitter
[1] ~ (Slide show) button (119)
l12J ~/E{ (Scale up/down) buttons (86)
~ lID (Delete) button (- step 6in "Read
This First")
[H] ././ .. /~/. (29)

Insulation sheet •
Remote commander clip
Attaching the shoulder strap
This camera has two hooks to attach the
shoulder strap. Attach the end
of the strap
without the remote
commander clip on the
grip side of the camera. Attach the other
end
of the strap on the other side of the
camera.
•Remove the insulation sheet before using the
Remote Commander.
To change the battery of the Remote
Commander
•Point the Remote Commander at the remote
sensor on the front
of the camera in order to
operate the camera (page 14).
CD While pressing on the tab, inset your
fingernail into the slit
to pull out the
battery case.
®Place anew battery with the +side facing
up.
®Insert the battery case back into the
Remote Commander until it clicks.
WARNING
Battery may explode if mistreated. Do
not recharge, disassemble or dispose of
in fire.
•When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with aSony CR2025 lithium battery.
Use
of another battery may present arisk of fire
or explosion.
17

18
When threading the strap through the
holder ring, hold the tip
of the strap with
your finger, and slide the holder ring rather
than the tip of the strap into position to
secure the strap.
If the holder ring comes off the strap, put it
back on the strap from the notched side.
Notched Side,,~
I"

Indicators on the monitor
See the pages in parentheses for details of
operation.
Viewfinder
[]
>'·i·
.Local AF area (49)
, ..
. ,
-
CSpot
AF area (49)
()
Spot metering area (48)
-Shooting area for aspect
ratio 16:9 (95)
',,:\"iU'
~
Flash-compensation (75)
~
Flashing: The flash is being
charged
Lit: The flash has been
charged
(- step 5 in "Read
This First")
WL Wireless flash (73)
HHigh-speed sync (167)
1m
Manual focus (53)
• «:-:» «::»
Focus (- step 5in "Read
This First")
125 Shutter speed (39)
5.6 Aperture (37)
IEV scale (42,
47,58)
- 2"1' 00' 01 • 02 +
*AE lock (46)
9Shots-remaining counter
(56)
((_
Camera-shake warning (-
step 5in "Read This First")
"TIP':'." ..
:.:
eo •• ••·· :~: " .. ,
".:+.:.<
.. III
Super SteadyShot scale (-
step 5in "Read This First")
[i!!]
Aspect ratio 16:9 (95) •
19

LCD monitor (Recording information
display)
• The illustration above is for the full display in
the horizontal position (page 23).
• PAS MMode dial (34)
~[ji][IJ~
~~
Contrast, Saturation,
Sharpness, Brightness,
Zone Matching (68)
AF area (49)
D-range optimizer (66)
Creative Style (67)
(!) Metering (48)
,...
.....
oJ "."
lS13ndanit I Vivid t
INeutrat ~
ICleartIDeept
I Light t IPortrailt
~ ISunsett
I Night t IAutumnt
IBIWtISepiat
()+I~+1
m +1lm+
1
11I+1
am mI:.J Focus mode (52)
mB III
ImD
o ~ Hi (910 Drive mode (55)
Iml3c Iml3s lml3WB
O.3Ev3 O.3Ev3 Lo3
~ i
Aperture (37)
Shutter speed (39)
I YP 1/125 F5.6+2.o* I
A~O 1~-3"2"1"~"1":"3+ I A~~O I
DI_I==I~11!Ii1
~ ()+1 ~+1 m+11 Awe
I ~90%1 FINE I CL I~ 100 I
I ~ Quick Navi B Creative Style I
4
5
3
1
2
F5.6
1/125
;~i~Rf~y.·:i·;·;i0~;)!WJ; •• ~~.m~
?Register number (79)
3
+2.0
*Exposure (45)
AE lock (46)
AWB ~~~ +1
""1''''
5500KM1 ~~
White balance (Auto,
Preset, Color temperature,
Color filter, Custom) (61)
CL CM CS Image size (94)
t=L.c:M[::$
~ ~
REAR Wl
,
-3- -2- -1' -0' -1' '2- -3+
•
ISO AUTO
Exposure-compensation
(45)/Metered Manual (42)
Flash-compensation (75)
EV scale (42, 47,58)
ISO sensitivity (64)
~,"~I 90%
RAW cRAW
RAW+J cRAW+J
X.FINE FINE
STO
Battery remaining (---+ step
Jin "Read This First")
Image quality (96)
Memory card (123)
100 Remaining number
of
recordable images (24)
20