Sony XVM-F65 User manual

2-599-592-31(1)
Operating Instructions
Manual de instrucciones
ݷᔫႁී
操作說明
XVM-F65
2006 Sony Corporation
ES
Mobile Monitor
GB
CS
For installation and connections, see the supplied Installation/Connections
manual.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de Instalación/Conexiones suministrado.
ᎌڔᓤೌ୻Lj༿ݬ୅এࡒࡼڔᓤNjೌ୻၄ݿă
有關安裝和連接，請參見附帶的安裝∕連接手冊。
CT
POR FAVOR LEA DETALLADAMENTE ESTE MANUAL
DE INSTRUCCIONES ANTES DE CONECTAR Y
OPERAR ESTE EQUIPO.
RECUERDE QUE UN MAL USO DE SU APARATO
PODRÍA ANULAR LA GARANTÍA.

2
Welcome!
Thank you for purchasing the Sony Mobile Monitor.
•PAL or NTSC colour system compatible
•Full, Wide and Zoom screen modes available, in addition to the normal screen
mode.
•The low reflection liquid crystal panel reduces the glare from outside lighting
sources.
•Adjustable brightness control, according to lighting conditions
•Backlight dimmer control produces sharp contrast image, free from reversed or
blurred colours.
•2Audio/Video inputs and 1 Audio/Video output are provided for connecting a
video player, video game, and an additional monitor.
•Built-in infrared transmitter for cordless headphones.

3
Table of contents
Welcome! .............................................................................................................................. 2
Precautions ........................................................................................................................... 4
Location of controls ............................................................................................................6
Operation
Selecting the input source .................................................................................................. 8
Setting the screen mode ..................................................................................................... 9
Changing the menu settings ........................................................................................... 10
Additional Information
Maintenance ...................................................................................................................... 12
Specifications ..................................................................................................................... 14
Troubleshooting ................................................................................................................ 15

4
Precautions
To avoid the risk of serious injury or accident, read the following precautions before
installing and operating the unit.
On safety
Comply with your local traffic rules and regulations.
•While driving
-The driver must not watch or operate the monitor. It may lead to distraction and
cause an accident.
-The driver must not use the headphones. It may lead to distraction and cause an
accident.
Park the car in a safe place when the driver watch and operate the monitor, or use
headphones.
Watching video pictures
The video pictures appear only after you park the car and set
the parking brake.
When the car starts moving, the video pictures automatically
disappear after displaying the following caution.
Do not operate equipment connected to the monitor or watch
the monitor while driving.
The caution above appears only when the monitor is
connected to the installation cradle.
•After installing
-Take care not to bump your head against the unit when getting up from the back
seat.
-Take extra care not to wind the wire of the headphones around your neck
avoiding injury or suffocation in the event of a sudden movement of the vehicle.
-Keep small articles out of the reach of children.
-Do not leave the monitor under direct sunlight for a long period of time.
DRIVE MODE

5
On installation
•Installing this unit requires technical expertise.
This unit should be installed by a qualified
technician or service personnel.
• If you try to install this unit by yourself, do it
properly, referring to the installation and wiring
diagrams in this operating manual. Improper
installation may result in fire or electric shock.
• Before installation, be sure to turn the ignition
switch to the OFF position or take the key out.
Installing this unit with the ignition on may
cause battery drain or a short circuit.
• Do not damage any pipes, tubes, the fuel tank or
electric wiring when installing this unit. This can cause
a fire. If you drill a hole in car panels, make sure that
any hidden car parts will not be damaged.
• Do not use any nuts or bolts for safety devices such as
steering linkage, fuel supply or braking systems. This
can cause a fire or an accident.
• Take care to prevent cords and wires from getting
tangled or crimped in the moving portion of a seat rail.
Where to install
Before installing this unit, please check your local traffic rules and regulations.
Do not install this unit where:
-It will obstruct the driver’s view.
-It will obstruct the operation of the airbag system.
-It will obstruct the operation of the vehicle, especially
the steering wheel, shift lever, or brake pedal.
-Adriver or passengers may injure themselves when
getting into or out of the car.
If you have any questions or problems concerning your unit that are not covered
in this manual, please consult your nearest Sony dealer.

6
7 8
15
643
2
Location of controls
Monitor
*If interference occurs while using several cordless headphones
If several monitors are installed and used simultaneously, interference may occur.
1INPUT button
Press to select the input source.
2Receptor for the card remote
commander/Transmitter for the
cordless headphones*
3MENU button
Press to make various settings.
4DIMMER button
Press to switch the dimmer on/off.
(When it is set to On, the display
darkens.)
5POWER (on/off) button
Press to turn on/off the monitor.
6VOLUME +/– buttons
Press to turn up or down the volume
(The default volume level is 25.) or
to select the item during menu
operation.
7RESET button
8Monaural speaker

7
Tip
Refer to “Replacing the lithium battery” for details on how to replace the batteries (page
13).
Card remote commander RM-X709
1ATT button
Press to quickly attenuate the
volume.
To restore the previous volume
level, press (ATT) again or (VOL)
+/–.
2INPUT button
Press to select the input source.
3MENU button
Press to select the menu settings.
4|/1(power) button
5MODE button
Press to change the screen mode.
6M/mbuttons
Press to select the desired item.
7VOL (volume) +/– buttons
Press to adjust the volume of the
monitor.
2
3
1
5
6
4
7
MODEMENU
INPUT
ATT `/1
VOL

8
`/1
V/v
INPUT
MODEMENU
INPUT
ATT `/1
VOL
VOLUME
ĸ-Ĺ
POWERINPUT
Operation
Selecting the input source
You can select the input source and colour system.
1Press (POWER).
On the card remote commander, press
{/1
.
The power is turned on.
2Press (INPUT) to select the desired input source.
Each time you press (INPUT), the indication changes in the following sequence:
Using cordless headphones (optional)
You can use infrared cordless headphones, MV-02HP (optional), with the unit. Please
refer to the operating instructions for MV-02HP.
Notes
•The volume of the cordless headphones cannot be adjusted with the supplied card
remote commander. Use the volume control on the cordless headphones.
•For your safety, do not use the headphones while driving a car.
• Do not leave the headphones in a place subject to direct sunlight, or in a high
temperature.
•If the cordless headphones are used while exposed to direct sunlight, sensitivity of the
infrared receptor may deteriorate, and inferior quality sound may result.
VIDEO 1 VIDEO 2

9
Setting the screen mode
In addition to the full mode, wide, normal and zoom modes are also available.
Press (MODE) repeatedly.
The current mode is displayed on the screen first.
Each time the button is pressed, the screen mode swiches in the following
sequence:
You can also set the screen mode in the menu setting (page 10).
Tip
Images may appear coarse-grained when viewed in the zoom mode.
Zoom
Zoom
Zoom
Full
Full
Full Wide
Wide
Wide
Normal
Normal
Normal
Normal
An image with an aspect ratio
of 4 to 3.
Zoom
An image with an aspect ratio of 4
to 3 enlarged to the left and right
edges of the screen, with the
overflowing parts (top and bottom)
cut off to fill the screen.
Full (regular image)
An image with an aspect ratio
of 4 to 3 enlarged to the left
and right edges of the screen.
Wide
An image with an aspect ratio of
4 to 3, with only the left and
right sides of the image being
enlarged to fill the screen.
MENU
MENU MODE
MODEMENU
INPUT
ATT `/1
VOL

10
Changing the menu settings
You can adjust the display settings manually if the display is hard to see from the
position where you are seated.
1Press (MENU).
The “Picture” screen appears.
Each time you press (MENU), the setting screen changes in the following
sequence:
*Appears only when the NTSC colour system is selected.
2Press Mor m((VOLUME) (+) or (–) on the monitor) to adjust to the desired
setting.
See the next page for the setting options.
Picture 32
Press +/- or MENU.
The setting value of the
item selected appears in this
area.
VOLUME
ĸ-Ĺ
MENU
MENU
MODEMENU
INPUT
ATT `/1
VOL
V/v
Picture Brightness Color Video Adjust Mode
Menu Off Cordless Headphones Speaker
Blue BackHue*
Select NTSC or PAL System