6
01_GB_4-745-635-01(1)_180710-04_01-05
For: HKC-FB30
If you have any questions about this
product, you may call:
Sony Customer Information Service
Center 1-800-222-7669 or http://
www.sony.com/
Supplier’s Declaration of
Conformity
Trade Name : SONY
Model : HKC-FB30
Responsible
party
: Sony Electronics
Inc.
Address : 16535 Via
Esprillo, San
Diego, CA 92127
U.S.A.
Telephone
Number : 858-942-2230
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference that
may cause undesired operation.
English
L-2_4-745-635-01(1)_201807101836_GB_1/53
Before operating the unit, please
read this manual thoroughly and
retain it for future reference.
L-1A_4-745-635-01(1)_201807101836_GB_2/53
Owner’s Record
The model and serial numbers are
located at the rear. Record these
numbers in the space provided
below.Refer to these numbers
whenever you call upon your Sony
dealer regarding this product.
Model No. _______________________
Serial No. _______________________
L-4_4-745-635-01(1)_201807101836_GB_3/53
For the customers in the U.S.A.
This equipment has been tested
and found to comply with the
limits for a Class A digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference when
the equipment is operated in a
commercial environment. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may
cause harmful interference to radio
communications. Operation of this
equipment in a residential area is
likely to cause harmful interference in
which case the user will be required
to correct the interference at his own
expense.
E-5_4-745-635-01(1)_201807101836_GB_4/53
You are cautioned that any changes
or modifications not expressly
approved in this manual could
void your authority to operate this
equipment.
E-7_4-745-635-01(1)_201807101836_GB_5/53
All interface cables used to connect
peripherals must be shielded in order
to comply with the limits for a digital
device pursuant to Subpart B of part
15 of FCC Rules.
E-8_4-745-635-01(1)_201807101836_GB_6/53
GB
