Sony STR-DE897/S - Currently Not Available User manual

Audio/Video Receiver
• 6 Channel Power Rating: 110W Per Channel x 7 (8 ohms 1 kHz, THD 0.7%)
100W x 7 (8 ohms 20Hz-20kHz, THD 0.09%)
• Dolby® Digital, Dolby® Digital EX, dts®, dts ES®, dts:Neo6®, Dolby® Pro Logic® II Decoding
• S-Video Up-Conversion from Composite Video
• Multi-Room Audio Output with Independant Source Selection
• Preprogrammed/Learning/Macro Remote Control
• Front Composite A/V and Optical Input
• 5.1 and 7.1 Multi-Channel Analog Inputs
• 2 Component Video Inputs: HD Pass (80 MHz)
Auto Channel Grouping Enjoy DVD movies that have the 5.1/6.1 audio converted to 7.1 channels. When a 5.1 channel mix is
present, auto channel grouping will route the discrete information for surround left/right directly to surround left/right outputs
while adding a new
surround back left/right channel. When 6.1 channel mix is detected, auto channel grouping will route the discrete information for
surround left/right directly to surround left/right output while the 6th channel is duplicated by both surround back channels
(left/right).
Dolby® Pro Logic® II Decoding Creating surround sound requires only a stereo source. Listening to the radio, a CD, or an old
VCR tape in full surround sound. Anything stereo can be converted to digital signal and distributed to your front, surround,
subwoofer, and center speakers.
Component Video Pass-Through In order to benefit from a progressive or satellite signal, you must use the component video
inputs and outputs. This utilizes 3 cables (red, green and blue) to assure proper color separation while more information passes to
the display source. Passing these signals through your receiver enables the user to simply switch the “function” on their receiver,
and not worry about changing any settings on the TV.
STR-DE897/B

Audio/Video Receiver
For more information:
http://www.sony.com/dn
STR-DE897/B
Features
Amplifier Section
• Black Finish A/V Receiver (Also
Available in Silver)
• A & B/A or B Speaker Switch
• 32-bit Dolby® Digital, Dolby Pro®
Logic and dts® Decoder
• 32-bit DSP with 13 Acoustic
Environments
• Digital Cinema Sound™ system
with Cinema Studio EX modes
• Sound Field Modes (Movie, Music,
AFD, 2 Channel) Movie: 3 Modes;
Music: 3 Modes; AFD: 6 Modes; 2
Channel: 1 Mode
• Station Presets 30 Total
• Analog Direct
• Circuit Device (Discrete)
• Sound Field Link
Convenience
• Remote Commander® Remote
Control Pre-Programmed + Learn
+ Limited Macro
• Easy Setup Expandable Menu
System for Simplicity
Inputs and Outputs
• Assignable Digital Inputs
• 2 Component Video Inputs HD
Pass 80 MHz
• Screw Terminals for A and B
Speaker Connections
• Front Composite A/V with Optical
• Multi-Channel In (Analog) 5.1
Channel & 7.1 Channel Input
• Headphone Jack 1/4" Jack Gold
Plated
• Phono (mm)
• Control A 1 II
• Analog Audio Input x 3
• Digital Input x 6 (4 Optical, 2
Coaxial)
• Analog Audio Output x 1
• Digital Output x 1 (Optical)
• 2nd Zone Audio Ouput
• Pre-Out x 1 (Subwoofer)
• Composite Video Input x 5
• Composite Video Output x 2
• S-Video Input x 3
• S-Video Output x 1
• Component Video Input x 2 (HD
Pass 80 MHz)
• Component Video Output x 1 (HD
Pass 80 MHz)
• Monitor Out x 2 (1 Composite, 1
S-Video)
• AC Outlet (switched) x 2
Specifications
Amplifier Section
• FM Tuning Range 87.5 - 108 MHz
• AM Tuning Range 530 - 1710 kHz
• Display Type (Dot FL.)
• Record Out Level Impedance
500mV/10 kohm
• 7 Channel Power Rating 110 Watts
Per Channel x 7 (8 ohms 1 kHz,
THD 0.7%)
• 7 Channel Power Rating 100 Watts
Per Channel x 7 (8 ohms
20Hz-20kHz, THD 0.09%)
• Composite Video Input Sensitivity
Impedance 1 Vp-p/75 ohm
Video
• Frequency Response Line (CD) 10
Hz - 100kHz ±3 dB
• Phono Input Sensitivity Impedance
8mV/50 kohm
• Line (CD) Input Sensitivity
Impedance 500mV/50 k ohm
• Subwoofer Pre-Out Level
Impedance 2V/1 kohm
• Power Requirements 120V AC, 60
Hz
General
• Stereo Power Rating 100 Watts
Per Channel x 2 (8 ohms 20 Hz-20
kHz, THD .09%)
• Phono Input S/N Ratio 86 dB
• Line Input S/N Ratio 96 dB
Supplied Accessories
• Instruction Manual
• Remote Model: RM-PG413
Weights & Measures
• 23.59 lbs (10.7 kg)
• 16.93" x 6.2" x 14.57" (430 x
157.5 x 370 mm)
UPC Codes
• 0272426441820
©2004 Sony Electronics Inc. All rights
reserved. Features and specifications are
subject to change without notice. All
trademarks referenced herein are trademarks
of Sony or their respective owners.
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656