Sony XR-55A90J Owner's manual

Dismantling Information forUse
by ProfessionalRecyclers
9-888-790-42
OLED
Sony EMCS (M) Sdn. Bhd., SHES-M
© 2021.03
ORIGINAL MANUAL ISSUE DATE: 2021.03
Conditions of Use:
(1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this information
for any purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part
without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-
date before using it.
Model:
XR-55A90J
XR-65A90J

MODEL LISTS
Model Remote Destination
XR
-55A90J RMF-TX621E CEI , UKA, CEP
XR
-65A90J RMF-TX621E CEI, UKA, CEP
Remote

1 LIST OF ITEMS TO BRING
1. Screwdriver (e.g. #2 Phillips Screwdriver)
2. Multimeter
3. ESD Wrist Straps
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
6. Service Manual (Unique) (for remove & replace details)
2 OPTIONAL EQUIPMENT
1. Screwdriver (e.g. #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
2. Flashlight
3. Service Manual (Common) (for t/shooting information)
For Surface Mounted Parts/Connectors:
Hot-Air Type soldering Iron is needed.
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
Plastic or Metal Ruler
(In case of Metal ruler, wrap in tape
(L=50mm) for prevent scratches)
TOOLS & EQUIPMENT
3

DISSASSEMBLY AND REMOVAL CAUTION 55”
4

DISSASSEMBLY AND REMOVAL CAUTION 55”
5

EXPLODED VIEW & PART LISTS
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated
when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
Stand 30
• Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and / or replaced
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
!
• and shaded parts are critical for safety. Replace only with part number specified
XR-55A90J
Spacer 23
Slide, Clamp (mini) Slide, Clamp
23
4
5
6
7
8
910
13
1
14
16
15
15
17
18
19
20
19
22
24
27
29
31
11
12
21
2526
28
28
6

REF. NO PART NO. DESCRIPTION REMARKS
11-010-566-11 CONNECTOR ASSY 30P CN6401(PSU)-CN1700(B)-CN8(TCON)(1)
2 1-010-567-11 CONNECTOR ASSY 20P CN6601(PSU)-CN6(TCON)(1)
31-972-625-11 CONNECTOR ASSY 4P CN6605(B)-CIN(1)
41-010-613-11 FLEXIBLE FLAT CABLE 20P CN3803(B)-BT(1)
51-010-615-11 FLEXIBLE FLAT CABLE 25P CN1200(B)-CN102(H)(1)
6 1-010-617-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1)
71-010-619-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1)
81-007-229-11 HARNESS ASSY (KEY) CN5402(B)-KEY(1)
91-010-568-11 HARNESS ASSY(SP) TSP-CN5404(B)-CN6603(B)-SP(1)
4
6
7
5
2
13
9
8
HARNESS/CABLES 55”
7

REF. NO PART NO. DESCRIPTION REMARKS
14 A-5028-583-A TSP COMPL Printed Circuit Board, incl. capacitors
17 A-5026-251-A COMPL SVC BM5S21_AS_EUUK Printed Circuit Board, incl. capacitors
22 1-010-552-11 G17 - STATIC CONVERTER(TV) Internal Power Supply
29 A-5026-950-A P-MOD (YDBO055UTG01)(SVC) OLED
1-912-832-11 POWER-SUPPLY CORD SET(EU) CEI, CEP Cable
1-002-007-11 C17 AC CORD SET(SWISS) CEI, CEP
1-001-115-12 POWER-SUPPLY CORD SET(UK) UKA
PARTS LIST 55”
8

DISSASSEMBLY AND REMOVAL CAUTION 65”
9

DISSASSEMBLY AND REMOVAL CAUTION 65”
10

EXPLODED VIEW &
PART LISTS
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated
when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
Stand 30
• Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and / or replaced
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
!
• and shaded parts are critical for safety. Replace only with part number specified
XR-65A90J
Spacer 23
Slide, Clamp (mini) Slide, Clamp
26 25
23
4
5
7
6
9
8
10
12
1
14
15
15
16
17
18
19
20
21
27
24
22
29
31
13
11
28
28
11

REF. NO PART NO. DESCRIPTION REMARKS
11-010-566-11 CONNECTOR ASSY 30P CN6401(PSU)-CN1700(B)-CN8(TCON)(1)
21-010-567-11 CONNECTOR ASSY 20P CN6601(PSU)-CN6(TCON)(1)
3 1-972-625-11 CONNECTOR ASSY 4P CN6605(B)-CIN(1)
41-010-613-11 FLEXIBLE FLAT CABLE 20P CN3803(B)-BT(1)
51-010-615-11 FLEXIBLE FLAT CABLE 25P CN1200(B)-CN102(H)(1)
61-010-617-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1)
7 1-010-619-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1)
81-007-232-11 HARNESS ASSY (KEY) CN5402(B)-KEY(1)
91-010-569-11 HARNESS ASSY(SP) TSP-CN5404(B)-CN6603(B)-SP(1)
1
2
3
45
6
78
9
HARNESS/CABLES 65”
12

REF. NO PART NO. DESCRIPTION REMARKS
14 A-5028-583-A TSP COMPL Printed Circuit Board, incl. capacitors
17 A-5026-251-A COMPL SVC BM5S21_AS_EUUK Printed Circuit Board, incl. capacitors
22 1-010-552-11 G17 - STATIC CONVERTER(TV) Internal Power Supply
29 A-5026-951-A P-MOD (YDBO065UTG01)(SVC) OLED
1-912-832-11 POWER-SUPPLY CORD SET(EU) CEI , CEP Cable
1-002-007-11 C17 AC CORD SET(SWISS) CEI , CEP
1-001-115-12 POWER-SUPPLY CORD SET(UK) UKA
PARTS LIST 65”
13

9-888-790-42
Sony EMCS (M) Sdn. Bhd.
SHES-M English
© 2021.03
14