Sony XC-ES50 User manual

B/W VIDEO CAMERA
Component/OEM
OUTLINE FEATURES
●XC-ES50/ES50CE/EI50/EI50CE: 1/2 type IT CCD
●XC-ES30/ES30CE/EI30/EI30CE: 1/3 type IT CCD
●XC-EU50/EU50CE: 1/2 type IT CCD
●Compact and light weight: 29 (W) x 29 (H) x 32 (D) mm,
50 g (1 3/16 x 1 3/16 x 1 5/16 inches, 2 oz)
●Near-infrared sensitivity (XC-EI50/EI50CE, XC-EI30/EI30CE)
●Near-ultraviolet sensitivity (XC-EU50/EU50CE)
●Minimum illumination at F1.4
0.3 lx (XC-ES50/ES50CE, XC-ES30/ES30CE)
0.1 lx (XC-EI50/EI50CE)
0.2 lx (XC-EI30/EI30CE)
●High S/N Ratio: 60 dB
●Electronic shutter function (1/100 - 1/10,000 s)
●Flexible trigger shutter function
●2:1 interlaced/non-interlaced
●Frame/field exposure
●Restart/reset function
●Synchronization: internal/external (HD/VD, VS)
●High shock and vibration tolerance
The XC-E Series are compact, light-weight one-piece black and
white cameras incorporating the latest 1/2 and 1/3 type Interline (IT)
CCD which produces new levels of picture detail. With dimensions
of 29 x 29 x 32 mm (13/16 x 13/16 x 15/16 inches), these cameras can
easily be installed in places where installation was previously
difficult for other larger cameras.
The XC-E Series offer three different model ranges that only differ
in spectral sensitivity to suit various application environments.The
XC-ES Series (XC-ES50/ES50CE and XC-ES30/ES30CE) are stan-
dard models for general use under visible light conditions.
The XC-EI Series (
XC-EI50/EI50CE and XC-EI30/EI30CE ) offer excellent
near-infrared sensitivity. Under low light conditions or when used
with IR LED illumination systems, these cameras provide clear
images. The XC-EU Series (XC-EU50/EU50CE) offer near-ultraviolet
sensitivity in the i-line, or 365 nm, range. The short wavelength
allows the XC-EU Series to capture very fine detail.
All models have identical dimensions and controls, making them
easy to interchange. A variety of settings are available for differing
subject and lighting conditions. All camera control switches are
accessible from the outside of the camera. Excellent vibration and
shock characteristics make these cameras ideal for demanding
machine vision applications.
XC-ES50/ES50CE
XC-ES30/ES30CE
XC-EI50/EI50CE
XC-EI30/EI30CE
XC-EU50/EU50CE
SON45741_XC_Eseries 9/24/01 3:40 PM Page 1

CONNECTION DIAGRAM
LO-77ERK
Extension rings kit
VCL-08YM
VCL-12YM
VCL-16Y-M
VCL-25Y-M
Tripod adaptor
VCT-333I
CCXC-12P02N
Camera cable
C-mount lens
*Only VCL-50Y-M is applicable to the XC-EU50/EU50CE.
*VCL-50Y-M
AC
VIDEO OUT
HD/VD
TRIG
WEN
Camera adaptor
DC-700/700CE
(New EIAJ standard 12 pin connector)
CCXC-12P05N
CCXC-12P10N
CCXC-12P25N
XC-ES50/ES50CE
XC-ES30/ES30CE
XC-EI50/EI50CE
XC-EI30/EI30CE
XC-EU50/EU50CE
DIMENSIONS & REAR PANEL
Unit: mm
29
12
6.5
C0.5
22
29
29
29
10
6.5
C0.5
C0.5
5.5
32
12 pin multi-connector
1
2
43
12 Pin multi-connector
ACCESSORIES
Compact camera adaptor
DC-700/700CE
●Compact, lightweight
(700 g, 1 lb 8 oz)
●
External sync IN / OUT
●Trigger input / WEN output
●New EIAJ standard 12 pin connector
●Dimensions: 110(W) x 53(H) x 160(D) mm
(4 3/8x 2 1/8x 6 3/8inches)
12 pin camera cable
(CE standard)
CCXC-12P02N (2m)
CCXC-12P05N (5m)
CCXC-12P10N (10m)
CCXC-12P25N (25m)
Tripod adaptor
VCT-333I
●ABS
●
Approx. 6.1 g (0.2 oz)
●Dimensions:
18(W)x6(H)x2.9 (D)mm
(23/32 x 1/4x 1/8inches)
No. Switch name Factory-setting mode
1Dip switch 1-4: Shutter speed OFF
Dip switch 5: FRAME/FIELD FRAME
Dip switch 6-8: External trigger Normal
shutter mode, restart/reset mode
Dip switch 9: Gamma ON/OFF OFF
Dip switch 0: GAIN Manual
2Manual GAIN (M GAIN) control knob Twelve o'clock position
3HD/VD signal input/output switch EXT
475 Ωtermination switch ON
PIN No. External sync (HD/VD) Internal sync (HD/VD)
1 GND GND
2 +12 V +12 V
3 GND GND
4 Video output Video output
5 GND GND
6 *1 HD input HD output
7 *1 VD input VD output
8 GND GND
9- -
10 *2 WEN output *2 WEN output
11 TRIG input TRIG input
12 GND GND
Shutter speed/Mode
setting DIP switch
*1 HD/VD input is required when using restart, reset mode.
*2 WEN output works only when in external trigger shutter mode.
●Factory setting mode of rear panel
SON45741_XC_Eseries 9/24/01 3:40 PM Page 2

Standard model Near IR model
■Applicable wavelength range
300 400
400-770 nm
700 800 900
■Applicable wavelength range
400-870 nm
300 400 700 800 900
SPECIFICATIONS
XC-ES50 XC-ES50CE XC-ES30 XC-ES30CE XC-EI50 XC-EI50CE XC-EI30 XC-EI30CE
Image device 1/2type IT CCD 1/3type IT CCD 1/2type IT CCD 1/3type IT CCD
Effective picture elements 768 (H) x 494 (V) 752 (H) x 582 (V) 768 (H) x 494 (V) 752 (H) x 582 (V) 768(H) x 494(V) 752 (H) x 582 (V) 768(H) x 494(V) 752 (H) x 582 (V)
Signal system EIA (standard) CCIR (standard) EIA (standard) CCIR (standard) EIA (standard) CCIR (standard) EIA (standard) CCIR (standard)
Horizontal frequency 15.734 kHz 15.652 kHz 15.734 kHz 15.652 kHz 15.734 kHz 15.652 kHz 15.734 kHz 15.652 kHz
Vertical frequency 59.94 Hz 50 Hz 59.94 Hz 50 Hz 59.94 Hz 50 Hz 59.94 Hz 50 Hz
Cell Size 8.4 x 9.8 µm 8.6 x 8.3 µm 6.35 x 7.4 µm 6.5 x 6.25 µm 8.4 x 9.8 µm 8.6 x 8.3 µm 6.35 x 7.4 µm 6.5 x 6.25 µm
Lens mount C mount
Flange back 17.526 mm
Sync system Internal / External (auto)
External sync system HD / VD (2 to 5 Vp-p), VS
External sync frequency +/- 1%
Jitter Less than +/- 50 nsec
Scanning system 2:1 Interlaced
Video output 1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution 570 TV lines 560 TV lines 570 TV lines 560 TV lines 570 TV lines 560 TV lines 570 TV lines 560 TV lines
Sensitivity 400 lx F5.6 400 lx F4 400 lx F11 400 lx F8
(γ = ON MIN GAIN, NO IR cut filter) (γ = ON MIN GAIN, NO IR cut filter) (γ = ON MIN GAIN, NO IR cut filter) (γ = ON MIN GAIN, NO IR cut filter)
Minimum illumination* 0.3 lx 0.3 lx 0.1 lx 0.2 lx
S/N ratio 60 dB
Gain AGC (0-18 dB) / Manual (0-18 dB) Selectable
Gamma ON / OFF
Normal shutter 1/100 to
1/10,000
s
1/120
to
1/10,000
s
1/100
to
1/10,000
s
1/120
to
1/10,000
s
1/100
to
1/10,000
s
1/120
to
1
/ 10,000 s
1/100
to
1
/ 10,000 s
1/120
to
1
/ 10,000 s
External trigger shutter** 1/4 to
1/10,000
s
1/4
to
1/8,000
s
1/4
to
1/10,000
s
1/4
to
1/8,000
s
1/4
to
1/10,000
s
1/4
to
1/8,000
s
1/4
to
1/10,000
s
1/4
to
1/8,000
s
Power requirements DC12 V (+9 to 16 V)
Power consumption 1.6 W 1.4 W 1.6 W 1.4 W
Dimensions 1 3/16 x 1 3/16 x 1 5/16 inches (29 (W) x 29 (H) x 32 (D) mm)
Weight 2 oz (50 g)
Operation temp./mois. -10 to +50°C (14 to +122°F) / 20 to 80%
Storage temp./mois. -20 to +60°C (-4 to +140°F) / 20 to 95%
Vibration 10 G (20 to 200 Hz)
Shock resistance 70 G
MTBF 126,000 hrs.
Regulatory compliance UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width
XC-ES50/ES50CE
XC-ES30/ES30CE
XC-EI50/EI50CE
XC-EI30/EI30CE
SON45741_XC_Eseries 9/24/01 3:40 PM Page 3

XC-EU50 XC-EU50CE
Image device 1/2type IT CCD
Signal system EIA CCIR
Effective picture elements
768 x 494 752 x 582
Cell size 8.4 (H) x 9.8 (V) µm 8.6 (H) x 8.3 (V) µm
Horizontal frequency 15.734 kHz 15.625 kHz
Vertical frequency 59.94 Hz 50 Hz
Lens mount C mount
Flange back 17.526 mm
Sync system Internal / External (auto)
External sync system HD / VD (2 to 5 Vp-p), VS
External sync frequency +/- 1%
Jitter Less than +/- 50 nsec
Scanning system 2:1 Interlaced
Video output 1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution 570 TV lines 560 TV lines
S/N ratio 60 dB
Gain AGC / Manual Selectable
Gamma ON / OFF
Normal shutter 1/100 to
1/10,000
s
1/120
to
1/10,000
s
External trigger shutter 1/4 to
1/10,000
s
1/4
to
1/8,000
s
Power requirements DC12 V (+9 to 16 V)
Power consumption 1.6 W
Dimensions 1 3/16 x 1 3/16 x 1 5/16 inches (29 (W) x 29 (H) x 32 (D) mm)
Weight 2 oz (50 g)
Operation temp./mois. -5 to +45°C (-23 to +113°F) / 20 to 80% (no condensing)
Storage temp./mois. -20 to +50°C (-4 to +122°F) / 20 to 95% (no condensing)
Vibration 10 G (20 to 200 Hz)
Shock resistance 70 G
MTBF 126,000 hrs.
Regulatory compliance UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), EMC (AS35448)
Supplied accessories Lens mount cap (1), Operating instructions (1)
Product Information Document & Software
Application Guide
http://www.sony.co.jp/ISP/
Click!
Product information
is available on the
ISP Home Page
Information including product features and catalogs Product document information and sample software
downloads
Product catalog
Command List
Sample software
Instruction Manual
User’s Guide
XC-E series
XC-EU50/EU50CE
UV model
The XC-EU50/EU50CE are compact, and light-weight CCD
cameras that have near-ultraviolet sensitivity in the i-line, or 365 nm,
range. Examples of typical application areas are PCB and solder
inspection, document proofing, microscopy, medical and cosmetics
applications. The short wavelength allows the XC-EU50/EU50CE
cameras to capture clearly very fine detail and surface structures,
which cannot be detected using visible or IR lighting, including very
small scratches, dust or blemishes, as well as special fluorescent
materials.
© 2001 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Design and specifications are subject to change without notice.
MK7726V1IW01AUG
IS-1112-B Printed in USA 9/01
XC-EU50/EU50CE
■Applicable wavelength range
300-420 nm
300 400 700 800 900
SPECIFICATIONS
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/videocameras
1-800-686-SONY
SON45741_XC_Eseries 9/24/01 3:40 PM Page 4